Welcome to use Oladance fully-open audio wearable device

Let’s open it for pairing Open the charging case when using it for the very first time, When white LED indicator flickers slowly and continuously. The earphone will enter pairing mode automatically.

How to wear earphone properly

List of Articles

Product Introduction

Power button

Power on: Short press, power on after two short vibrations in a row

Power off: Long press, power off after one vibration

Single click

Music mode

Play/pause

Phone mode

Answer

Double click

Music mode

Double click left earphone: Play the previous music Double click the right earphone: Play the next music

Phone mode

Hang up/reject a call

Triple click

Wake up voice assistant

Long press

 Phone mode

Mute/Unmute

Intercom mode

Enter APP intercom/ quite APP intercom

Slide forwards/backwards

 Music mode

Volume up/down

Phone mode

It Volume up/down

Clear Bluetooth pairing history:

Long press both sides for 5s to clear Bluetooth pairing history.

Bluetooth pairing mode:

Long press both sides for 2s

to enter Bluetooth pairing mode.

Indicator description

White indicator slow flickering: Bluetooth pairing

White indicator quick flickering: Bluetooth connecting

Bluetooth normally on: Bluetooth connected

White/red indicator alternative flickering: Earphone off

Connect charging cable to charging case, indicator shows current battery level and continues breathing flickering.

• Indicator will become off once charging case completes charging.

Enjoy the accompany Multipoint connection of Oladance

Download Oladance APP to find more customized functions.

Multipoint connection

Enable multi-point connection: Once the first device is connected, hold both earphones for 2s to enter pairing mode when hearing the prompt sound, then the second device can search the earphone for connection.

Cancel multi-point connection: When earphone has been connected to 2 devices, hold both earphones for 2s to disconnect all Bluetooth devices when hearing the prompt sound, and then enter the pairing mode.

Disposal and Recycling Information

This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage.

Battery warning

The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Declaration of Conformity:

Hereby, Shenzhen Dancing Future Technology Ltd., declares that this device is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: http://oladance.com SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help important announcement.

RF Exposure:

The portable device is designed to meet the requirements for exposure to radio waves established by the FCC RF exposure guidelines. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.48W/kg.

RF Exposure

The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mm between the radiator and the Head. The highest reported Head SAR value: 0.48W/kg.

Important Note:

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning:

1. Don’t place the product into a liquid environment or avoid the product exposed to high humidity

2. Avoid extrusion to avert the damage to the product

3. Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time

4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.

5. Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.

6. Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.

7. Don’t use the equipment when riding a motorcycle or a bicycle, driving a car or crossing the road to ensure your safety.

8. Keep the equipment out of reach of children or pets to avert the damage.

9. Don’t wash the equipment with chemical cleanser or strong detergent.

Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.

-English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference.

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC ID:        2A9AR-OLAO7L     HVIN: OLAO7

FCC ID:        2A9AR-OLAO7R    HVIN: OLAO7R

IC: 29727-0LAO7L                201-230366

IC: 29727-0LAO7R              CMIIT ID: 2023DP7188

Operation temperature: 0-35°C

Input: 5.0V = 1.1A

Points de collection sur www.quefairedemesdechets.fr

Privilegiez la reparation ou le don de votre appareil !

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>