Oladance Break B1 Wearable Stereo Earbuds User Guide

Oladance Break B1 Wearable Stereo Earbuds

WHAT In the box

Product Introduction

Get Started

• Open case lid.

• Bluetooth is ready to pair when lights

• on earbuds start slow blinking

• Control Music

• Tap once: Play / Pause

Control Music

• Tap twice:
  

• Left bud: Previous track

• Right bu: Next track

Control Music

• Slide Forward: Volume up
• Slide Back: Volume down

Make Phone call

• Tap Once: Answer a call

• Make Phone call
  

• Tap Twice: End or decline a call

• Active voice assistant
  

Make Phone call

• Slide Forward: Volume up
• Slide Back: Volume down

Clear Bluetooth pairing list

• Tap and hold both buds at the same time for 5s

Bluetooth Discovery Mode

• Tap and hold 2s on both buds at the same time

You think that all

• Download Oladance APP to enjoy more customization and cool feature.
• Let’s have fun with your Oladance Wearable Stereo!

How to wear it

1. Pick up
2. Rota the earbud along the ear curve
3. Check the fit
4. You are all set

Basic Parameters

Operation temperature: 0~45°C Input: 5.0V 1A

Disposal and Recycling Information

This symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.
Battery Warning
The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded, or put into the fire. The battery under very low air pressure may result in an explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert an explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to local regulations and shall not be disposed of as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to an incorrect model. Don’t compress or puncture the battery with hard objects. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.
Declaration of Conformity:
Hereby, Shenzhen Dancing Tech Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.oladance.com
SAR: RF exposure information: The EIRP power of the device at the maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate harmful EM emissions above the reference level as specified in EC Council Recommendation (1999/519/EC).

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help with important announcements. The SAR limit of IC is 1.6W/Kg for the head. The highest SAR value reported under this standard during the product certification when used against the head is 0.457W/Kg. FCC ID: 2A24K-OLA02L FCC ID:2A24K-OLA02R IC: 27690-OLA02L IC: 27690-OLA02R 201-220076 CMIIT ID：2021DP17737

Important Note:

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Warning:

1. Don’t place the product into a liquid environment or avoid the product exposed to high humidity
2. Avoid extrusion to avert damage to the product
3. Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time
4. Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
5. Avoid the dusty, wet, and dirty environment where the electronic circuit of the equipment may be damaged if used.
6. Don’t Use the equipment at the moment of a thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
7. Don’t use the equipment when riding a motorcycle or a bicycle, driving a car, or crossing the road to ensure your safety.
8. Keep the equipment out of reach of children or pets to avert damage.
9. Don’t wash the equipment with a chemical cleanser or strong detergent
10. Don’t Listen to the voice under high sound pressure and high volume for a long time to prevent possible hearing impairment when the headset is used.

-English: “
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

References

• Oladance Official | The Worldwide Leader in the Open Wearable Audio Industry

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>