Oladance OLA08 OWS Sports Air Conduction Bluetooth Earphones Instruction Manual
- June 1, 2024
- Oladance
Table of Contents
OWS SPORTS
Instruction Manual
Welcome to Oladance OWS Sports Air Conduction Bluetooth Earphones
Prior to use, please take the time to familiarize yourself with the basic functions of the earphones.
How to wear the earphones
Using both hands, gently pull the earphones apart.
Position them backwards along the earlobes, then adjust to a comfortable fit.
Main functional components
First time Bluetooth pairing
When used for the first time, the earphones will automatically enter the
Bluetooth pairing mode; The LED indicator will flash alternately in red and
blue.
Enable Bluetooth on your mobile device, find devices and select ‘OWS Sports’
from the list. Choose Connect.
Once connected, the LED indicator will illuminate blue, and then turn off
about 30 seconds later.
How to boot up/shut down the earphones
Bootup
Press and hold the Power button for 0.5 seconds; the LED indicator will
illuminatindicating that the device is powering up
Shutdown
Press and hold the Power button for 1.5 seconds; the LED indicator will
extinguish, indicating that the device has shut down.
Volume adjustment
Press
Volume +: to increase volume
Volume – : to reduce volume
Call muting
Single Press
In music mode to Play/Pause
In call mode to Answer a phone call
Double Press
In music mode to Proceed to Next Track
In call mode to Hang up/Reject call
Triple Press
In music mode to Navigate to Previous Track
Wake up your voice assistant
Press and hold for 0.5 seconds to wake up your voice assistant.
Note: This feature is not available during calls or when connected to the
App.
Intercom mode
Connect to the App to enter intercom mode; press and hold to start the
intercom, and release to end.
More functions
Single Press
During a call, if you receive a second incoming call, press once to hold the
current call and answer the second call. In multi-call mode, press once to
switch between calls in a circular rotation.
Note: Supports up to three-way calling.
Double Press
During a call, if you receive a second incoming call, press twice to hang up
the current call and answer the second call.
LED indicator status description
Flashing alternately between blue and red: Indicates the Bluetooth pairing
state
Fast flashing blue: Indicates the earphones are connected to the device
Blue remains on then turns off: Indicates a successful bluetooth connection
Steady red light: Indicates the earphones are in the charging state.
Slow flashing red: Indicates low battery level (< 5%)
Red remains on for 0.5s then turns off: Indicates the earphones are shut down
Multi-point connection
OWS Sports supports connection of two devices with seamless switching.
You may enable multi-point connection with either one of the following
methods:
Method 1: Disconnect the Bluetooth connection of the first device to re-enter
the pairing mode.
Method 2: Shut down the earphones by long-pressing the Volume+ button for 1.5
seconds, then long-press the Volume+ button for 5 seconds to enter forced
pairing state.
After successfully connecting the second device, you may manually re-connect
the first device. The next time you power up the earphones, they will
automatically connect to both devices simultaneously.
Clear Bluetooth pairing history
Make sure the earphones are powered up.
Long-press the Function and Volume- buttons simultaneously for 1.5 seconds to
restore the earphones to factory settings and clear the Bluetooth pairing
history.
Bluetooth pairing mode
After that, the earphones will automatically enter the pairing mode.
Charging
Connect the earphones’ magnetic charging contact to the magnetic charging
wire; the magnets will accurately align and optimize charging for the most
efficient and stable position.
When charging is complete, the red indicator will turn off automatically.
Indulge in the Oladance Experience!
Download the oladance App to discover more customization features and functions.
Contents
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included),
and / or the packaging, indicates that the device and its electrical
accessories (for example, a headset, adapter or cable) and batteries should
not be disposed of as household garbage.
Battery warning
The built-in lithium battery of the product is forbidden to be disassembled,
impacted, extruded or put into fire. The battery under the very low air
pressure may result in explosion or flammable liquid or gas leakage. Avoid the
battery in a high-temperature environment or being exposed to strong sunlight
to avert explosion. Don’t use the battery continuously in case of serious
ballooning. The battery shall be handled pursuant to the local regulations and
shall not be disposed as household garbage. Don’t try to repair, remove or
refit the battery. The explosion may happen if the battery is replaced by the
one subject to incorrect model. Don’t compress or puncture the battery with
hard object. The battery leakage, overheating or outbreak of a fire may occur
if the battery is destroyed.
Declaration of Conformity:
** Hereby, Shenzhen Dancing Future Technology Ltd., declares that this
device is in compliance with Directive 2014/53/EU.The full text of the EU
declaration of conformity is available at the following internet address:
http://oladance.com
SAR: RF exposure information: The EIRP power of the device at maximal case is
below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure
assessment has been performed to prove that this unit will not generate the
harmful EM emission above the reference level as specified in EC Council
Recommendation (1999/519/EC).
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:** This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement.
RF Exposure:
The portable device is designed to meet the requirements for exposure to radio
waves established by the FCC RF exposure guidelines. These requirements set a
SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value
is measured at a distance of 0mm between the radiator and the Head. The
highest reported Head SAR value: 0.08W/kg.
RF Exposure
The portable device is designed to meet the requirements for exposure to radio
waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value is measured at a
distance of 0mm between the radiator and the Head. The highest reported Head
SAR value: 0.08W/kg.
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Warning:
- Don’t place the product into a liquid environment or avoid the product exposed to high humidity.
- Avoid extrusion to avert the damage to the product.
- Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time.
- Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
- Avoid the dusty, wet and dirty environment where the electronic circuit of the equipment may be damaged if being used.
- Don’t use the equipment at the moment of thunderstorm because the thunderstorm may incur equipment fault or shock hazard.
- Don’t use the equipment when riding a motorcycle or a bicycle,driving a car or crossing the road to ensure your safety.
- Keep the equipment out of reach of children or pets to avert the damage.
- Don’t wash the equipment with chemical cleanser or strong detergent.
**** Don’t listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference.
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Basic Specifications
Product name | Oladance OWS S1 |
---|---|
Product model | OLA 08 |
Bluetooth protocol | Bluetooth 5.1 |
Working frequency | 2402-2480MHz |
Operation temperature: 0~35°C
Input: 5V 0.5A
FCC ID:2A9AR-OLA08
IC:29727-OLA08
217-231103
Special Notice
To ensure that you have access to the most up-to-date and accurate
instructions, we highly recommend you to scan the QR code to view the latest
version of the manual. This way, you won’t miss out on any important
information or updates.
Thank you for your understanding and support!
https://www.oladanceshop.com/pages/user-manuel
Creating sound to live with.
Documents / Resources
|
Oladance OLA08 OWS Sports Air Conduction Bluetooth
Earphones
[pdf] Instruction Manual
OLA08 OWS Sports Air Conduction Bluetooth Earphones, OLA08, OWS Sports Air
Conduction Bluetooth Earphones, Sports Air Conduction Bluetooth Earphones, Air
Conduction Bluetooth Earphones, Conduction Bluetooth Earphones, Bluetooth
Earphones, Earphones
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>