PHILIPS BN158C Linkable LED Batten Light With Scene Switch Instruction Manual
- June 13, 2024
- Philips
Table of Contents
PHILIPS BN158C Linkable LED Batten Light With Scene Switch
Product Information
Specifications:
- Product: Philips Scene Switch LED Batten
- Model: BN158C
- Product Types:
- BN158C LED16/SCCT L1200 AU
- BN158C LED8/SCCT L600 AU
- Dimensions:
- 32x20x1185 mm (L1200)
- 32x20x585 mm (L600)
- CCT (K): 3000/6500/4000
- Lumen Output (lm):
- 1500/1600/1700 (L1200)
- 750/800/850 (L600)
- Power (W):
- 13.0W (L1200)
- 6.5W (L600)
Product Usage Instructions
Mounting Instructions:
To mount the LED Batten, follow these steps:
- Install on the ceiling or wall using the provided mounting clips.
- Ensure proper mounting distance (refer to manual).
Trunking Methods:
- Method A: Fit the male plug part into the female socket. Affix the next system, only after linking. Maximum amount of linking: 8 pcs.
- Method B: Use connector wire for linking as required. Maximum amount of linking: 8 pcs.
Wire Connection:
The LED Batten comes with a 1m power cable with a 2-pin AU plug and a 0.2m
connecting cable for easy installation.
Switching:
The LED Batten features an easy switching mechanism with a memory function.
Simply use the ON/OFF switch for control.
Frequently Asked Questions (FAQ):
-
Q: How many linking pcs are supported for trunking methods A and B?
A: Both trunking methods support a maximum of 8 linking pcs. -
Q: What is the recommended mounting distance for Type D L600 and L1200?
A: For L600, the recommended mounting distance is between 300-500mm, and for L1200, it is between 800-1100mm.
FEATURES
Dimensions
Product Type| Dimension (mm)| CCT (K)| Lumen Output (lm)| Power (W)|
---|---|---|---|---|---
BN158C LED16/SCCT L1200 AU| 32x20x1185| 3000/6500/4000| 1500/1600/1700| 13.0|
0.144
BN158C LED8/SCCT L600 AU| 32x20x585| 3000/6500/4000| 750/800/850| 6.5| 0.078
Surface Mounting
Installation on ceiling or wall through mounting clips
INSTALLATION
Trunking method A
Fit male plug part into the female socket. Affix the next system, only after linking. Maximum amount of linking: 8 pcs
Trunking method B
Use connector wire for linking as required. Maximum amount of linking: 8 pcs
Wire Connection
Easy Switching with memory function
- Switch on the light with the last memory status (default 3000K in Relax mode).
- Toggle switch (on→off→on) in less than 6.4 seconds to change to next CCT (3000K→6500K → 4000K → 3000K → … depends on last status)
- Default setting
- “Relax mode”, 3000K→
- “Work mode”, 6500K →
- “Awake mode”, 4000K
Reset function
Toggle switch (on→off→on→off→on) in less than 1.2 seconds to reset to default setting CCT 3000K.
Please read this manual carefully before using the product.
- For indoor use only.
- Do not switch ON before completing installation.
- The luminaire must be installed by a licensed electrician and wired by Australia/New Zealand wiring rules.
- Use only the supplied Power Cord an Connector Wire that comes with (or supplied as an accessory) with the luminaire.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- This luminaire conforms with AS/NZS 60598.
- Luminaire must not be used or stored in a corrosive environment where hazardous materials such as Sulphur, Chlorine, Phthalates, etc., are present.
- This product allows a maximum 8pcs trunking (via connector or end-to-end trunking). For your safety concerns, the connection of BN158C with any other product is prohibited. And make sure to keep the last male socket open.
- Max current of power cable: 2A.
Inrush current
DISPOSAL
This marking indicates that this product should not be disposed with other household wastes throughout Australia and New Zealand. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device or product, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Signify New Zealand Limited 123 Carlton Gore Road Newmarket Auckland 1023 New
Zealand
Tel: 0800 454 448
Signify Australia Ltd
65 Epping Road
North Ryde NSW 2113
Toll Free number:1300 304 404 www.signify.com
Philips and the Philips shield emblem are registered trademarks of Koninklijke
Philips N.V
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au/LED