Tenda U1 300Mbps High Gain Wireless USB Adapter Installation Guide

Tenda U1 300Mbps High Gain Wireless USB Adapter

1. Install wireless USB adapter
   Insert the wireless USB adapter into the USB port of your PC.
   TIP: The wireless USB adapter is compatible with Windows XP/Vista/7/8/8.1/10, Linux, and Mac OS.

2. Install Tenda network adapter program
   a. Insert the included CD in your PC’s CD drive.
   TIP: Windows 10 is free of installing the program. It can connect to WiFi with the wireless USB adapter directly.
   b. Open the CD file and double click Setup.exe to run the adapter program.Check “Accept the agreement” and then click
   Install Now. (Note that the installation directory cannot include Chinese characters, or installation may fail.)
   Installing.. This process will last for minutes. Please be patient.
   Click Done to finish setup.

3. Connect to WiFi
   After installing the wireless USB adapter and Tenda Network Adapter program successfully, you can connect to a Wireless network.

• Find your WiFi and click it.
• Enter the WiFi password and click OK.
• Connected!

Safety and Emission Statement

CE Mark Warning

• This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
• Hereby, Manufacturer, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• — Reorient or relocate the receiving antenna.
• — Increase the separation between the equipment and receiver.
• — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• — Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

NOM LA OPERACIóN DE ESTE DISPOSITIVO ESTA SUJETA A LAS SIGUIENTES CONDICIONES:

• a) Es posible que este equipo o dispositivo no cause interferencia perjudicial.
• b) Este equipo o dispositivo debe aceptar cualquier tipo de interferencia, incluyendo la que pueda causar su
• operación no deseada.
• © 2016 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
• Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.

Technical Support

• Manufacturer: SHENZHEN TENDA TECHNOLOGY CO., LTD.

• Address: 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District,

• Shenzhen, China 518052

• Technical Support: support@tenda.com.cn

• Telephone: (86 755) 2765 7180

• Email:sales@tenda.com.cn

• Website:http://www.tendacn.com

• Skype: tendasz

• YouTube: Tendasz1999

• Manufacturer:

• Address:Neumann-reichardt-Str. 27-33, Haus 12, 22041, Hamburg

• Technical Support:support@tenda.com.cn

• Telephone:+49(40)657262810

• Email:sales@tenda.com.cn

• Website: http://www.tendacn.com

• Skype: tendasz

• YouTube: Tendasz1999

• *Wireless USB Adapter1**

• CD1

• Install Guide1

• If any of the items is missing or damaged, please contact your dealer for replacement as soon as possible.

• 300Mbps High Gain Wireless USB Adapter
  

• Go towww.tendacn.com for more info about this product.

References

• Tenda US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>