Foshan Yiyi Lighting Technology Co Ltd YY-5050 Bluetooth Controller User Manual
- June 12, 2024
- Foshan Yiyi Lighting Technology Co Ltd
Table of Contents
- Foshan Yiyi Lighting Technology Co Ltd YY-5050 Bluetooth Controller User
- APP Program Usage
- VI. Safety Information
- Scan two-dimensional code download APP
- VII. Warranty Policy
- 111Specifications
- IV. Control Method
- FCC Statement
- Radiation Exposure Statement
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Foshan Yiyi Lighting Technology Co Ltd YY-5050 Bluetooth Controller User
Manual
APP Program Usage
VI. Safety Information
- FOR INDOOR USE ONLY.
- RISK OF ELECTRIC SHOCK.
- DO NOT EXPOSE TO LQUID, VAPOR OR RAIN.
- Keep away from open flame.
- Avoid overheating the light bar when power is on. Please unlock the lightbar in time.
- . Avoid rough mounting surface. Make sure the surface is clean and dry beforeinstallation.
Scan two-dimensional code download APP
-
Connect LED color strip and controller, power on controller
-
Scan two-dimensional code download APP:
-
Start APP, search and connnect controller
-
Enjoy the Bluetooth wireless control experienceAvoid tearing back glue quickly during installation and stk it to theinstallation surface slowly.
-
Avoid pressing the lamp bead on the lamp strip vigorously.
-
Backing adhesive does not have good adhesion to all materials, so pleaseuse the buckle we deserve,
-
Avoid the direct contact between light beads, which risks the fault oflight beads caused by short-circuit.
-
The light strip can be cut according to the required length, but if you want to reuse the extra light strip, you need to buy the conncetors
VII. Warranty Policy
30-day money-back guarantee for any reason
For 30 days after the date of purchase, return your undamaged product and
receive a full refund for ANY reason. 12-month warranty for quality-related
issues
For 12 months after the date of purchase, we take care of all quality-related
issues with a
REPLACEMENT OR FULL REFUND. Reminder: Be sure to use your product as directed.
111Specifications
LEDType:SMDLED
Color:MultipleColors Selection Strip Width:10mm
ColorRenderingindex(CRI}Ra8+
Working Tempreture:-20°Cto 50°C
Beamangle:120 degrees
Lifespan:36,000Hrs+
Usage:Indoor useonly
IV. Control Method
- Steady Color
- Brightness Diming
- White Light Brightness Percentage
- Simulation ofsunrise sunset
- Timing orf /Mode
- MMusic Activation Mode
- Mutiple Color Changing Mode
The connection lamp belt is powered by the connector USB
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference receiv
ed,including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for Compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, p ursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against h armful interference in
a residential installation. This equipment generates uses and can radiate
radio freq uency energy and, if not installed and used in accordance with the
instructions, may cause harmful interfe rence to radio communications.
However, there is no guarantee that interference will not occur in a partic
ular installation. If this equipment does cause harmful interference to radio
or television reception, which ¢ an be determined by turning the equipment off
and on, the user is encouraged to try to correct the interfer ence by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help importantannouncement
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>