woguo KX3 Smart Eyewear User Manual

June 12, 2024
woguo

woguo KX3 Smart Eyewear

Specifications

  • Compliance: FCC Part 15
  • RF Exposure Compliance: Yes

Safety Precautions

Before using the device, please read the user manual carefully and adhere to the following safety precautions:

  • Do not make any changes or modifications to the device that are  not explicitly approved by the manufacturer.
  • Avoid exposing the device to extreme temperatures or moisture.
  • Keep the device away from water and other liquids to prevent damage.

Operating Instructions

  1. Ensure the device is placed on a stable surface before operation.
  2. Power on the device using the designated power button.
  3. Follow the on-screen instructions for initial setup and configuration.
  4. To comply with FCC regulations, refrain from causing harmful interference with the device.
  5. In case of interference, the device is designed to accept and adjust to received interference for uninterrupted operation.

Statement

Thank you for using our product. Please read the manual before use. The manual might change because of hardware or software update.

Model name
KX3 eyewear with open directional audio, this product is a Bluetooth glasses with stereo mini speakers, easy operation, easy carrying.

Qroduct characteristics

*Compatible with mainstream brands of mobile phones, tablets and other bluetooth devices.

  • Support SBC audio decoding technology, achieve CD – level sound quality.
  • Left and right speakers, audio directed all around you, to give you real stereo sound effect

Packing list No.

  1. Smart eyewear *1
  2. Charging cable *1
  3. Cleaning cloth*1
  4. User manual*1
  5. Warranty card*1

How to switch on/switch off

  1. witch on the device: when charging, unplug the charger, and it will switch on automatically. Or when it’s off, tap and hold the touch control area of both temples for 4 seconds to turn it on. By hearing “Power on”, then accompanied with “Pairing”, your device is on.
  2. Switch off: Plug in the charger, the device will be off automatically. Or when the device is on, long tap the touch control area on either temple for 4 seconds to turn it off. By hearing “Power off” the device is now switched off.

How to connect

Swith on the device, the left and right temples starts pairing, red and blue light flash alternately. when pairing is completed, lights are off and hear tone “Duludu”

  1. first time connect to mobile phone: Click setting on your mobile phone or any smart devices, turn on Bluetooth and search bluetooth name: eyewear max, click to connect it. By hearing “ding ding ding”it’s connected
  2. Second time connection: when switch your smart eyewear on, it will connect to your mobile phone or other smart devices automatically.

How to operate (suggest to use 2 fingers)

  1. Play/pause: double tap the touch control area on either temple
    Next/Previous song: slide forward/backward on the left temple to play next/previous

  2. Volume +/-: slide forward/backward on the right temple to +/- volume

  3.  Voice control: triple tap on either temple to activate voice control, such as Siri, Alexa, or others.

  4. Answer/hand up phone call: double tap touch control area on either temple

About charging

  1. Low Battery alarm, will hear indicating tone “Battery Low” every 5 minutes
  2. when device run out off power, it will “Power off” automatically 3)When charging, the indicator light is always red; when fully charged, the red and blue light flashes for 10 seconds and then the indicator light will off.

Noticement

  1. Please read the user manual carefully before using this product and keep this manual well
  2.  For the first time use, please fully charge the product.
  3. If the product is not charged for a long time (more than two weeks), please charge it fully before use.
  4. Use cleaning cloth to clear up lenses. Other cloth might damage your lens 5)When the battery temperature -10°C lower / 50 °C higher, the product might automatically shut down.

Matters needing attention

  1. Do not unassemble and repair the product for any reason, otherwise it might cause fire, electronic breakdown or even complete damage to the product.
  2. Do not put the equipment in an environment with too low or too high temperature (below -10° c or above 50° c).
  3.  Do not put the product under water or other liquid or humid environment.
  4. Do not expose your device in the sun for long time, otherwise they will be easily deformed, aged and broken.
  5.  Do not put charger’s magnetic suction close to any

Important safety information

  • Before using the device, please read all safety information to ensure proper and safe use.
  • Use of power supply/chargers or batteries that are not certified by the manufacturer may cause fire and explosion or other hazards.
  • Please use the accessories approved by the manufacturer and compatible with this type of equipment.
  • Please use the equipment within the temperature range of -10-50 °C and store the equipment and accessories within the same temperature range. When the temperature is too high or too low, it may cause equipment failure.
  • The device use a non-removable built-in battery, do not replace the battery to avoid damage.
  • After fully charged, disconnect the charger from the device and unplug the charger from the power socket.
  • Do not disassemble the battery, or bump, squeeze or put the battery into the fire. If serious expansion occurs, please do not continue to use.
  • Do not put in a high-temperature environment, battery overheating may cause an explosion
  • Please keep the equipment dry.
  • Do not repair the product by yourself when it cannot work properly.
  • When connecting other devices, please refer to the user manual for the connection method, do not arbitrarily connect to the equipment that does not match.

To avoid hearing loss, do not use high volume for a long time.
WARNING Please follow the relevant laws and regulations, do not use in the mentioned environment below.
For example, gas stations, oil warehouses, chemical warehouses and other places where inflammable and explosive oil and gas or chemicals are stored are prohibited to use the equipment.

  • Do not use the equipment in the operating room, emergency room, intensive care department, etc. In order to avoid interference the medical devices, please keep the device away from the pacemaker. Please keep at least 15 meters distance from the pacemaker.
  • If need to use this device near a personal medical device, consult a physician and device seller.
  • Please comply with all safety warnings and regulations regarding the use of this device while driving.
  • Do not use outdoors in thunderstorms, to avoid lightning strike.
  • Do not use the charger in the bathroom where there is high humidity, or it will lead to electric shock, personal injury, fire and charger damage.
  • Please comply with the relevant laws that clearly prohibit use in any environment.

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals