KERN ODC-87 Microscope Camera Instruction Manual

: June 12, 2024
: KERN

Table of Contents

KERN ODC-87 Microscope Camera
Specifications
Product Usage Instructions
FAQ
Before use
Technical data
Scope of delivery
Mounting
PC connection
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KERN ODC-87 Microscope Camera

Specifications

Model: KERN ODC 874, ODC 881
Resolution: 3.1 MP (ODC 874), 5.1 MP (ODC 881)
Interface: USB 2.0 (ODC 874), USB 3.0 (ODC 881)
Sensor: 1/2.7 CMOS (ODC 874), 1/2.8 CMOS (ODC 881)
Supported operating systems: Windows XP, Vista, 7, 8, 10

Product Usage Instructions

Before Use

Always use an approved power cable to prevent damages due to overheating or electric shock.
Do not open the housing or touch internal components to avoid damaging them.
Disconnect the power cable before cleaning the camera.
Keep the sensor clear from dust and do not touch it to avoid affecting the image quality.
Attach protective covers when the camera is not in use.

Mounting

Remove the black cover at the bottom of the camera.
Use the appropriate adjustment ring for microscopes with different eyepiece diameters for correct mounting.
Adjust the microscope for trinocular usage if necessary.

PC Connection

Establish a USB connection using the provided USB cable.
Install the software from the included CD.
Refer to the Help-files and User Guide for software operation and digital microscopy instructions.

FAQ

Q: What should I do if the camera is not recognized by my computer?
- A: Make sure the USB connection is secure and try using a different USB port. Install the necessary drivers from the software CD.
Q: How do I calibrate the camera?
- A: Use the provided object micrometer for calibration following the software instructions.
Q: Can I use this camera with a stereo microscope?
- A: Yes, you may need an adjustment ring for microscopes with different eyepiece diameters.

Before use

You should ensure that the device is not exposed to direct sunlight, temperatures which are too high or too low, vibrations, dust or a high level of humidity. The ideal temperature range is between 0 and 40°C and a relative humidity of 85% should not be exceeded. \Always make sure that you use an approved power cable. Thus, possible damages by reason of the development of overheating (fire hazard) or an electric shock can be prevented. Do not open the housing and touch the internal component. There is the risk of damaging them and affecting the functionality of the camera. In order to carry out cleanings always disconnect the power cable from the camera.\ Always keep the sensor clear from dust and do not touch it. Otherwise, there is the risk of affecting the microscopic image. In case of non-use always attach the protective covers.

Technical data

Model

KERN

| ****

Resolution

| ****

Interface

| ****

Sensor

| ****

Frame rate

| Color / Monochrome| Supported operating systems
---|---|---|---|---|---|---
ODC 874| 3,1 MP| USB 2.0| 1/2,7“ CMOS| 3 – 7,5 fps| Color| Win, XP, Vista, 7, 8, 10
ODC 881| 5,1 MP| USB 3.0| 1/2,8“ CMOS| 20 fps| Color| Win, XP, Vista, 7, 8, 10

Scope of delivery

Microscope camera
USB cable
Object micrometer for calibration
Software CD
Free download:
www.kern-sohn.com > DOWNLOADS > SOFTWARE > Microscope VIS Pro
Adjustment rings (Ø 30.0 mm + Ø 30.5 mm) for eyepiece adapter

Mounting

Remove the black cover at the bottom of the camera.
The round connecting piece, where the cover was attached, has a standardized diameter (Ø 23.2 mm). Thus, the camera suits all microscopes of which the eyepieces have this standard size.
For the mounting to the microscope, one of the eyepieces needs to be removed from the microscope tube and replaced by the eyepiece camera
Important:
For microscopes, that have a different eyepiece diameter (30.0 mm or 30.5 mm, mostly used for stereo microscopes), you need to apply the appropriate adjustment ring in order to mount the eyepiece camera correctly.
If necessary, adjust the microscope according to the trinocular usage (with the help of the trino toggle rod / trino toggle wheel).

PC connection

Establish a USB connection via a USB cable.
Installing the software with the help of the CD.
Both the supplied “Help”-files and the software-internal “User Guide” include all information and instructions about the operation of the software or of digital microscopy.