WOLFSTORM NJT01G101-R Rear Inner Fender Flares User Manual
- June 1, 2024
- WOLFSTORM
Table of Contents
WOLFSTORM NJT01G101-R Rear Inner Fender Flares
JAN
| Model: | NJT01G101-R |
|---|---|
| Material: | Q235A |
| Product Dimensions: | 40.9 x 9.5 x 12.6 inch |
| Package Dimensions: | 28 x 24 x 8.7 inch |
| Product Weight: | 18.52 lbs |
Thank You
※ Thank you for purchasing the REAR INNER FENDERS. Please read this manual carefully and keep it properly if you need to refer to it afterward. If you need any support or assistance, please contact us with your product model number andordernumber, and our support team will help you solve problems.
WARNING
※ This product is designed primarily to enhance the appearance of the vehicle. Do not rely in any way on the components of this product to protect against injury or death in the event of an accident. To reduce the risk of serious injury or property damage, please read all safety messages and understand all instructions and procedure notices before attempting to install or use this product.
CAUTION
※ Properly torque and recheck fasteners and security of step tread after 250 miles and inspect frequently. Do not use if damaged.
REQUIRED TOOLS
- **Socket
**
- **Ratchet
**
- **Allen Wrench
**
- **Safety Glasses
**
Parts Information
Parts NO.| Parts Name| Size| Line Graph| Qty|
Color
---|---|---|---|---|---
/
| Rear Inner Fender Flares 1|
/
| ****|
2
| **** Black
/
| Rear Inner Fender Flares 2|
/
| ****|
2
| **** Black
/
| Rear Inner Fender Flares 3|
/
| ****|
2
| **** Black
B05
| Half Head Allen Bolts|
M6 x 10
| ****|
**** 30
| **** Dacro Black
N09
| Hex Flange Nuts|
M6
| ****|
38
| **** Dacro Black
B07
| Half Head Allen Bolts|
M6 x 20
| ****|
22
| **** Dacro Black
W09
| Spring Washer|
Φ6
| ****|
22
| **** Dacro Black
W11
| Flat Washer|
**** Φ6x12x1.5
| ****|
22
| **** Dacro Black
- Note: spare parts such as B05、N09、B07、W09、W11 are provided with 2 PCS each (included in the number of parts details).
Installation Instructions
Step 1: Open the carton and take out the parts. Check whether the number of components is complete.
Step 2 : Remove the original rear fender flares and original rear inner fender flares and prepare the parts needed to install the Rear Inner Fender Flares.
Step 3: Splice the rear inner fender flares.
①
②
③
④B07：M6
⑤N09：M6
Step 4: Install the rear inner fender flares.
①
②B07：M6
③W09：Φ6
④W11：Φ6
⑤N09：M6
Step 5: Tighten all the bolts and nuts.
Step 6: Installation of a rear inner fender flares is complete. Please do periodic inspections of the inner fender flares to make sure that all hardware is secure and tight.
Step 7 : Install the original rear fender flares.