Blueair 3131000100 Blue Pure Mini Max Air Purifier User Manual

: June 12, 2024
: Blueair

Table of Contents

Safety information
Product map
Getting started
How to use tips
Maintenance information
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User manual

Scan here to access additional product, registration, warranty information and FAQs.

https://support.blueair.com/faq/s/topic-blue?language=en_US

Product name
Blue Pure Mini Max
Model number
3131000100

Safety information

Blue air puriﬁers are electrical appliances for indoor use only, take the necessary precautions to reduce the risk of ﬁre, electric shock or injury.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Always disconnect the appliance from the power supply before maintenance.
Do not attempt to open or service the appliance yourself. Service must be done by the manufacturer, service agent or similarly qualiﬁed personnel using only original Blueair spare parts.
Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazard, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualiﬁed person.
If the appliance is damaged or malfunctions, turn it oƒ, disconnect it from the power supply and contact Blueair.
The power plug must be ﬁrmly inserted in the power socket.
When disconnecting the unit from the power supply, do not pull on 7 the power cord, pull on the power plug.
Use the power cable provided with your Blueair air puriﬁer to plug directly and ﬁrmly into an appropriate, electrical outlet.
Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
Do not alter the power plug in any way. If the plug does not ﬁt into the outlet, contact qualiﬁed personnel to install the proper outlet.
Do not use the included power cord for anything else but the appliance.
Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
Do not place any objects on top of or directly against the appliance.
Do not sit on, stand, climb onto or hang from the appliance.
Keep the appliance, including the power cable, at a safe distance from heated surfaces and open ﬁre.
Keep the appliance and power plug away from water and other liquids.
Keep the appliance and power plug away from chemicals such as pesticides and deodorants.
Place the appliance on the ﬂoor. The appliance must be placed on a stable surface.
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.

The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model’s CADR for Smoke and the electrical energy it consumes, or CADR/Watt.
Blue Pure Max air purifier is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury.
WARNING: RISK OF ELECTRIC SHOCK – These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Product map

A. User interface
B. Air outlet
C. Fan motor
D. Noice shield
E. Particle & carbon filter
F. Washable fabric pre-filter

Getting started

Indicators

ON/Standby button
Fan Speed button
Night mode (lowest speed setting)
Speed 2
Speed 3
Fillter replacement

Two button control

**** Press the ON/Standby button to turn the air purifier.
Adjust the mode and the fan speed using the Fan Speed button.
This air purifier has a total of fan speeds – Night mode being the lowest/most silent one, Speed being the highest one.

Night mode
Lowest fan speed and fully dimmed lights.
1,2,3

Fan speeds 1–2-3
Fan speed levels which you can manually set by pressing the Fan Speed button on the interface.

How to use tips

Filter reset

Extra long press Fan Speed button for about 15 seconds (until all the LEDs of the interface light up). Then release.
After replacing the filter, it is required to manually conduct filter reset on the appliance. If done correctly, the red filter replacement indicator will blink three times and then disappear.

Enable/disable Child lock

Long press On/Standby button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.
When the Child lock is on the air purifier will continue to operate but the speed/mode button will be locked.

Maintenance information

Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance.
Changing your filter

When your air purifier’s indicator light turns red. it’s time to change the main filter. This tipically occurs at 6 months of active operation

Step 1
Turn off the air purifier and unplug it.
Rotate the top counter-clockwise to unlock, then lift up to remove it.

Step 2
Remove the fabric pre-filter and the noise shield.

Step 3
Use the filter handles to pull out the old filter and replace with new. Make sure to remove plastic wrapping before inserting the new filter in the appliance.

Step 4
Place the noise shield back on top of the filter. Pull up the the fabric pre- filter over the filter and the noise shield. (Please ensure that the leather tag is on the upper side of the fabric pre-filter.)

Step 5
Twist the top back on and plug in the air purifier.

Step 6
Important! Turn the air purifier back on and reset the filter indicator by pressing down the Fan Speed button for 15 seconds. (until all the LEDs of the interface light up for the second time and blink once). Then release.

Cleaning your washable pre-filter
Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.

Step 1
Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.

Step 2
Remove the fabric pre-filter from the noice shield and main filter.

Step 3
Wash according to instructions on the fabric pre-filter´s label.

Step 4
Pull the clean pre-filter back over the noice shield and main filter.

Step 5
Please ensure that the leather tab of the pre-filter is on the upper part.

Step 6
Push the top cylinder down, rotate it clockwise to lock it.

Disposal and recycling
This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for best way to recycle.

Troubleshooting

Issue	Potential Cause	Try this
There is a red circle on my air purifier’s panel.	It is time to change the
main filter.	1. Change filter according to the instructions in this guide.

2. Reset the filter life timer: press down the fan speed button until the red light disappears (15 seconds).
My air purifier is making too much noise.| Air purifiers that are set on a high-speed level produce more noise because they function at faster rates.| Set a lower fan speed. The air purifier should be quieter.
The plastic sealing is still on the filter.| 1. Remove the main filter according to the instructions in this guide.
2. Make sure that the plastic cover is removed from the filter.
If the main filter or pre-filter are clogged or dirty, the engine might not get sufficient airflow, which may result in increased noise levels.| Unplug your air purifier and vacuum the air purifier and its fabric pre-filter from the outside with a soft brush attachment.
Clean the fabric pre-filter in the washing machine.
Replace the main filter when your ﬁlter indicator turns red.
I cannot change the fan speed modes
on my air purifier.| The Child lock function is activated, which means that the fan speed modes can only be controlled from the Blueair app.| To deactivate the Child lock:
Press the ON/Standby button on your air purifier for 5 seconds
My air purifier does not start or fails
to operate.| The power cable is not fully inserted.| 1. Turn off and unplug your air purifier.
2. Make sure there are no objects or dust on and around the air purifier.
3. Ensure the top of the air purifier is correctly attached to the bottom.
4. Plug the power cable firmly into an outlet.
5. Press the On button and select a speed level.
6. Make sure the LED indicators on the air purifier are lighting up.
7. Make sure the airﬂow is working (feel with your hand that air is coming out from the air outlet).
If your device still fails to operate, please contact us.