Plastimea Mealiss 10 Brazilian Wax Kit and Professional Hair Removal Heater User Manual
- June 12, 2024
- Plastimea
Table of Contents
Plastimea Mealiss 10 Brazilian Wax Kit and Professional Hair Removal
Heater
Product Overview
The MEALISS 10 and MEALISS 120 are models of wax heaters offered by Plastimea PRO+. They are designed for hair removal purposes. The MEALISS 10 is presented in white with purple accents, while the MEALISS 120 is in black with purple accents.
Specifications
| Feature | MEALISS 10 | MEALISS 120 |
|---|---|---|
| Color | White with purple accents | Black with purple accents |
| Brand | Plastimea PRO+ | |
| Usage | Wax heating for hair removal | |
| Temperature Control | Adjustable settings with indicator |
How to Use
- Insert the wax into the pot and replace the top cover.
- Adjust the temperature by turning the cursor on ‘high’ until the wax is completely melted (about 20 minutes).
- Once the wax is melted, set the device on ‘medium,’ check the temperature and adjust if necessary.
- After use, remove the wax container using the plastic catcher to avoid burns.
- Turn off the device, replace the cover, and allow the device to cool before cleaning.
Caution and Safety
- Keep the device away from sinks, bathtubs, and damp areas.
- Disconnect immediately if the device falls into water or if the cord or plug is damaged.
- Avoid contact with hot surfaces or immersing the power cable in water.
- Keep out of reach of children to prevent accidents and burns.
- Use only as described in the manual and do not place on the floor.
- After use, let the device cool completely before storing it.
- Only put wax into the container designed for this purpose and test the temperature before each use.
- Beware of burn risks.
CAUTION
Put the device away from sinks, bathtubs and any source of dampness. If the
Wax Heater falls into water, DISCONNECT IMMEDIATELY the device before getting
it back. Do not use the device if the cable or the plug is damaged, if the
device does not work properly or is damaged, if the device is in contact with
water. Keep the device out of reach of children to avoid burns and
miscellaneous accidents. Avoid any contact with hot surfaces and devices. Only
use the device as described in the user manual and not on the floor.
Disconnect the device as soon as you are finished and let it cool before
cleaning it up and/ or storing it. Do check the Wax temperature before using
it and only put the wax into the container provided for that purpose.
FAQ
How long does it take for the wax to melt?
About 20 minutes when the heater is set on the 'high' setting.
Can the cover be left on the heater during the melting process?
Yes, you can keep the cover on during this stage to facilitate the melting process.
What should I do if the device gets wet or the cord is damaged?
Disconnect the device immediately and do not use it until it has been checked for safety.
How can I avoid burns when removing the wax container?
Use the plastic catcher designed to remove the container safely without risk of burns.
Is it safe to leave the device unattended while in use?
No, always monitor the device during use to ensure safety and avoid overheating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>