Apps Smart Life App User Manual
- June 5, 2024
- APPs
Table of Contents
Apps Smart Life App
HOW TO USE THE “SMART LIFE” APPLICATION
How to download the “Smart Life” application: Search for “Smart Life”
application in the Google Play store or in App Store and scan the QR code on
the package with your smart device.
Open the application, if you are a new user, click on “Register”, if you
already have an account, click on “login with existing account”.
Enter your e-mail address, to which a security code will be sent. Enter the
security code, then set up a password consisting of 6-20 characters.
How to connect the lamp to a smart device:
Open the application and click on “+” in the upper right corner.
Push on “Add Device”
Select Lighting on the left, and after that select Ceiling lamp WiFi in case
of Ceiling lamps, or Lightsource WiFi in case of Lightscources.
Connect with your smart device to the Wi-Fi network you wish to use.
The Wi-Fi connection may request the password of your Wi-Fi network during the
configuration.
The Wi-Fi connection must be 2,4 GHz.
Some routers have a limit for how many smart items can be controlled through
them, this limit is usally 8 pcs.
Please turn on Bluetooth and GPS, this might only be required for the pairing.
Switch on the lamp. RESET the lamp by switching 3xon-off the lamp until it
starts blinking, then the lamp is ready for pairing.
When the lamp is blinking, select in the application “Confirm the indicator
blinks or breathes”. Please select if it blinks quickly or slowly.
Pairing will be started and you will be able to use the lamp with your smart
device after it has been completed.
The remote control doesn’t need to be paired.
How to control the luminaire with the application:
Dimmer button: luminous flux and colour temperature setting
Scene button: selection of lighting mode settings
Schedule: timing of luminaire lighting
How to share the luminaire:
Editing>Share Device>Add sharing.
Enter the phone number of another smart phone or the e-mail address of another
user registered in the application you wish to share the control of the
luminaire with.
RESET the lamp by switching 3xon-off the lamp until it starts blinking, then
the lamp is ready for pairing.
Remove Device: In the application inside the lamps menu select Edit in the
upper right, and after that choose the Remove Device at the bottom.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>