SEALEY 225 Mesh Gauze Visor Instruction Manual

SEALEY 225 Mesh Gauze Visor

Product Information

Specifications

• Model: 225
• Product Name: Mesh Gauze Visor
• Field of Use: F – high-speed particles against low-energy impact
• Manufacturer: Sealey
• Warranty: 12 months from purchase date

Product Usage Instructions

Introduction

Thank you for purchasing the Sealey Mesh Gauze Visor. This product is manufactured to a high standard and with proper use and maintenance, it will provide years of trouble-free performance.

Safety

• WARNING! This visor does not protect against liquid splash, hot solids, electrical hazards, infrared, and ultraviolet radiation.
• Always ensure the visor is securely clipped to the safety helmet before use.

Field of Use

• The field of use for this visor model is F, designed to protect against high-speed particles with low energy impact. Refer to the symbols for mechanical strength and use them accordingly.

Maintenance

• Use a soft damp cloth and mild detergent to clean the visor.
• Avoid abrasive materials or harsh chemicals that may damage the product.

Storage

• Store the visor in a cool, dry place away from direct sunlight to maintain its quality and prolong its lifespan.

Obsolescence

• The lifespan of the visor depends on proper care and maintenance. Replace the visor entirely if it is damaged to ensure continued protection.

Frequently Asked Questions

Q: Can this visor protect against all types of hazards?

A: No, the visor is specifically designed for high-speed particles with low-energy impact. It does not protect against liquid splash, hot solids, electrical hazards, infrared, or ultraviolet radiation.

Q: How should I clean the visor?

A: Use a soft damp cloth and mild detergent for cleaning. Avoid abrasive materials or harsh chemicals that could damage the visor.

Q: What should I do if the visor is damaged?

A: If the visor is damaged, it is recommended to replace the entire article to ensure continued protection.

• Thank you for purchasing a Sealey product.
• Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
• IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
• USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
• FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

Suits all Worksafe® safety helmets. Conforms to BS EN1731:2006. Compatible with the Sealey Forestry Kit (502YFK).

SAFETY

• WARNING! This mesh gauze visor DOES NOT protect against liquid splash (including molten metal), hot solids, electrical hazards, infrared and ultraviolet radiation.
• Ensure the visor is clipped securely to the safety helmet before use.

FIELD OF USE

The field of use for this model is F – high-speed particles against low energy impact.

A If the symbols F, B and A are not common to both the mesh, the additional or alternative ocular and the frame then it is the lower level that shall be assigned to the complete mesh eye and face protector.
Mesh oculars marked S should not be used when there is a foreseeable risk of any hard or sharp flying particles.
**** If the field of use symbols F, B and A are not common to both the mesh, the additional or alternative ocular and the frame then it is the lower level that shall be assigned to the complete mesh eye and face protector.

MAINTENANCE

CLEANING

• Use a soft damp cloth and mild detergent.
• DO NOT use abrasive materials or harsh chemicals.

STORAGE

• Store in a cool, dry place, away from direct sunlight.

OBSOLESCENCE

• Like all protective products, the life depends on the type of use, care and maintenance.
• If your visor is damaged, replace the entire article.
• This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION

• Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment.
• When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
• EU Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland UK Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
• 01284 757500sales@sealey.co.uk www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>