402C Smart Lock Philips Easy Key Instruction Manual

402C Smart Lock Philips Easy Key

Specifications

• Model: 2A3P9402C
• Compliance: FCC Part 15
• Radiation Exposure Compliance: FCC limits for uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

The device has been evaluated to meet general RF exposure requirements and can be used in mobile device conditions without restrictions.

FCC Warning:
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:

1. this device may not cause harmful interference, and (
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FAQ
Q: Can the device be used in close proximity to the body?
A: The device should be operated with a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.

Exterior Assembly

1. Keypad: Used to enter the code and unlock from outside.
2. Fingerprint Sensor: Used to press finger and unlock from the outside.
3. Return/Cancel.
4. Confirm.
   Press# for 2 seconds to lock the door quickly.
   Press*# and administrator to enter system setting.

Interior Assembly

1. Set Button: Short press 1 second to enter system management.
   Press and hold for 5 seconds to restore the factory settings.

2. Thumb Turn: Used to lock and unlock manually from the inside.

3. One-Touch Lock/unlock: Lock/unlock the deadbolt with 1-touch locking.

Spare And Accessory Parts

1. Interior Assembly
2. Drilling Template
3. Exterior Assembly
4. Strike Screws(4)&Deadbolt Screws(2)
5. Mounting Plate
6. Mounting Screws(8)
7. Override Keys(2pcs)
8. Door Magnet
9. Deadbolt Assembly & Strike Plate
10. Cards (2pcs)

Set up your administrator password

Our default setting is right door opening. If you door is left opening, please set up your opening function.

& If you find that your smart door lock cannot be locked, it may be due to incorrect door opening direction settings.

Door opening function setting

Network Setting

Download Tuya APP From Google Play or Apple Store.Search ” Tuya Smart”.

Scan the QR code to download Tuya Smart APP.

1. Step 1:
   Tap on register to get started!

2. Step 2:
   Register MUST by E-Mail.

3. Step 3: Enter Verification Code

4. Step 4:Set Password

5. Step 5: Add Device

6. Step 6:
   Tap on camera&Lock> Lock {BLE)

7. Step 7:
   Check your smart lock in the Network configuration

8. Step 8:
   Waiting for app to find your device

9. Step 9:
   Tap done and finish setting

Language Setting

To enable dual authentication, at least 2 users must be registered.Dual authentication must be password+ password/ card. Two password shall not be the same one.

Initialization Setting

Delete User By Number

When the group meeting or party is held, user could enable the passageway mode for no-authentication access. Any successful access of, password or card will disable passageway function automatically.

Volume Setting

Installation Video

Exterior Assembly

For Smart Lock Installation

1. Step 1.Prepare the Door

2. Remove the existing lock and check your door.

3. . Check if your door has holes like the one below. Standard US doors are already compatible.
   If not, follow the template to drill holes on your door.

4. Step 2.lnstall Deadbolt

5. Check your door to see if the deadbolt requires adjustment.

6. lnsert and screw the deadbolt into the doorframe

7. Step 3.lnstall Exterior Assembly
   Remove the spacer before installation if you have a 38 mm cross bore.

8. Step 4.lnstall Interior Assembly

9. Detach the back cover from the interior assembly.

10.  Run the wires through the back cover.

11. Secure the back cover with screws.

12. Wire to the interior assembly.

13. Mount the interior assembly. Make sure both wires are tucked into the ca bi non the back of the interior assembly.
    Make sure the deadbolt is retracted and the thumb turn knob is on the ‘unlock’ position,check if the deadbolt moves properly by turning the thumbturn.

14. install the 4 AA batteries provided with the correct polarity. Don’t put on thecover until the system setup is done in the app.

15. Step 5.lnstall Strike Plate

Built in door sensor
Find the door magnet with accessory package number 9 and install it onto the door frame. The installation location should be connected to the sensor of the door lock.

FAQ

1. Q:How do I perform the initial setup for the smart door lock?
   A: To initiate the smart door lock, please press and hold the reset button for 3 seconds. Then press the “#” button, and the lock will be reset.

2. Q: How can I manually lock the lock?
   A: Press and hold # to lock the smart door lock.

3. Q: The batteries died before I could replace them. What can I do?
   A: You can use the keys to open the smart lock or plug in a power bank into the slot on the underside of the keypad to power it up, allowing you to enter and change the batteries.

4. Q: Why is my door lock unable to lock?
   A:Please check your door opening direction setting.

FCC WARNING FC

NOTE: This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This: equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile device conditions without restriction. Contains FCC ID: 2A3P9402C

Return and Warranty Information

Return Policy
We offer a 30-day money-back guarantee from the date of purchase. However, some exceptions may apply on a case-by-case basis, and a restocking fee may be charged. In addition, the buyer may be responsible for the cost of return shipping. If you have any inquiries regarding this policy, please contact us at support@hjmansion.com

Product Warranty

We offer a one-year free replacement from the date of purchase.
To claim your warranty replacement, you must make your first request or inquiry within one year of the date of purchase. Requests or inquiries made after one year from the date of purchase are not eligible for warranty. reserves the right to reject replacement requests. If you have any inquiries regarding this policy, please contact us at support@hjmansion.com

Customer Service
support is available:
Mon-Sun 9AM to 5PM PST
Email: support@hjmansion.com

Features

• Multiple Unlocking:
• Password/Card/Key/App Control.
• Anti-Peep Dummy Password:
• Up to 20 digits dummy password (right password included).

Battery Power Detection:
Low battery alert, user can access by password,card. “DiDi” alert to remind userre place battery in time. (The lock only works around 7 days under lower battery power supply).
When the battery is dead, No battery alert, user can access by keys only.

Wrong Entry Armed Mode:
Sound and red light alert with 3 continuous wrong inputs.
System frozen 180 seconds if 5 continuous wrong inputs within 5 minutes.

Emergency Power Supply:
When the batteries are completely dead, the power bank can be used to power the lock to open. Connect the USB interface with a power bank and enter password+# or card to unlock.

Remote Unlock:
Unlock by one touch on the APP or voice control through Alexa from anywhere and anytime and a Bluetooth hub is needed.

Technical Parameter

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>