COUGAR DUOFACE PRO RGB – Mid Tower Case Installation Guide

COUGAR DUOFACE PRO RGB – Mid Tower Case

FEATURES

• Two front panels for double enjoyment
• Ingenious open layout design
• Innovative quick slide dust filter
• Integrated RGB system with 5V ARGB motherboard synchronization Support for E-ATX motherboard
• Up to 390mm graphics cards
• Up to nine fans and 190mm CPU cooler

ASSEMBLY DRAWING

• A) Power button / RGB button
• B) Type C 3.1 / USB 3.0 / USB 2.0 / 4 Pole Headset Audio Jack
• C) Airflow front panel (packed separately)
• D) Tempered glass front panel (pre-installed)
• E) Quick slide dust filter
• F) Detachable fan/radiator bracket for front panel
• G) Detachable top panel
• H) Tempered glass side panel
• I) Right side panel
• J) Cable management bar with graphic card holder
• K) 3 x 120mm / 2 x 140mm fans for front panel
• L) 3 x 120mm / 2 x 140mm fans for top panel
• M) 1 x 120mm / 1 x 140mm fan for rear panel
• N) N 2 x 120mm fans for PSU cover
• O) O 3.5” HDD cage
• P) 2.5” SSD tray
• Q)  Air filter for top panel
• R) Air filter for bottom panel
• S ) Horizontal PCI slot covers (reassembled)
• T)  Vertical PCI slot covers (reassembled)
• U)  Plastic cover for vertical PCI slots

SPECIFICATIONS

(in)
I/O Panel| Type C 3.1 x 1, USB 3.0 x 2, USB 2.0 x 1, 4 Pole Headset Audio Jack x 1, RGB Button
3.5″ Drive Bay| 2
2.5″ Drive Bay| 2 (2 SSD trays included)
Expansion Slots| 7+3

Cooling Fan Support

| Front : 120mm x 3 / 140mm x 2
Top : 120mm x 3 / 140mm x 2
PSU Cover: 120mm x 2
Rear  : 120mm x 1 / 140mm x 1
Maximum Number of Fans

|

9

Water Cooling Radiator Support

| Front  : 360mm / 280mm / 240 mm / 140 mm / 120mm
---|---
Top 360mm / 280mm / 240 mm / 140 mm / 120mm
Rear  140 mm / 120mm
Transparent Left Panel| Tempered Glass

Onboard Lighting System

|

Yes

RGB Sync with M/B| Yes
COUGAR Logo RGB Light| Yes
Max. Graphics Card Length|

390(mm) / 15.4(in)

Max. CPU Cooler Height|

190(mm) / 7.5(in)

Max. PSU Length|

200(mm) / 7.9(in)

• Please choose either of front or top to install a 360mm radiator.

INSTALLING THE I / O CONNECTORS

ACCESSORY KIT

REMOVING PANELS

INSTALLING WATER COOLING RADIATORS & COOLING FANS

INSTALLING FANS AND RADIATOR AT THE

TOP

FRONT

REMOVING THE CABLE MANAGEMENT BAR

**INSTALLING GRAPHIC CARD

The vertical graphic card and the PCI-E riser cable are not included in the package, please purchase separately.
INSTALLING THE 3.5″ HDDS**

3.5″ HDDS

2.5″ SSDS

CONTROLLING LIGHTING MODES

FIRST MODE: SEVERAL LIGHTING EFFECTS
You can use the top panel’s RGB button to switch between several beautiful lighting effects we have preset for you.

SECOND MODE: MOTHERBOARD SYNCHRONIZATION
Please use the included adapter to connect to a compatible motherboard’s 3-pin 5V Addressable RGB header. Then, press and hold the RGB SW button for 3 seconds. The lights will flash in white once, it means the light signal has been changed to motherboard synchronization mode.

• SECOND MODE
  Motherboard synchronization
  Press and hold the RGB button for 3 seconds

• BACK TO FIRST MODE
  Several Lighting Effects
  Press the RGB button for one second.

If you press and hold the RGB button for 6 seconds, the lights will flash in white for twice, and the lights will be turned off.
The lighting controller has memory function after REBOOTING.
However, if you press and hold for 6 seconds and return on the light again, it will only return to the first light mode of default, and it cannot memorize the light effect before it was turned off.

GLOBAL WARRANTY POLICY

WARRANTY PERIODS OF COUGAR GAMING DEVICES
Product : COUGAR DUOFACE PRO RGB
Warranty  : 1 Year
This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
Only for electrical component COUGAR USA Technical Service Tel: 833-256-3778
Mail:rma@compucaseusa.com
Compucase Enterprise Co., Ltd. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>