BEAUTURAL LT-144 Fabric Shaver User Manual

BEAUTURAL LT-144 Fabric Shaver

Introduction

Thank you for purchasing Beautural Fabric Shaver. This instruction manual contains important information about safety, usage, and disposal. Use the product as described and keep this manual for future reference. If you sell this shaver or pass it on, also give this manual to the new owner.

Appliance Description

1. ON/OFF/Speed Switch
2. Battery Compartment Cover
3. Fluff Collector
4. Cutting Blades
5. Shaver Foil
6. Adjustable Spacer
7. Cleaning Brush
8. Protection Cap

Safety Instructions

Intended Use
This product is only authorized for domestic use and not for commercial or industrial purposes. It is only intended for applications described in these instructions.

Safety Information

• Children should not use, clean, or perform maintenance on the fabric shaver without adult supervision.
• Do not expose or submerge the shaver in water. Do not use the fabric shaver on moist fabrics.
• Make sure no foreign objects penetrate the shaver.
• Do not attempt to open the shaver’s housing, except the battery compartment to replace batteries and shaver foil to clean cutting blades.
• Do not oil or grease the cutting blades! This will smear your clothes.
• Remove the batteries if you do not intend to use the shaver for a long period of time.
• If the batteries leak, remove them immediately and clean the battery compartment with a dry cloth.
• Use ONLY the type of battery as indicated in the “Specifications” section of this manual.
• o not throw the batteries into fire. Do not recharge the batteries to avoid explosion.
• Always keep batteries out of the reach of infants and young children to prevent them from being swallowed. If swallowed, take immediate action and contact medical authorities for help.

Included Items

• 1x Fabric Shaver
• 1x Protection Cap
• 2 x Replaceable Cutting Blades
• 1x Cleaning Brush
• 1 x Instructional Manual

Before using the fabric shaver for the first time, check the package contents to ensure all parts are free of visible damage.

Handling and Operation

Inserting Batteries
Press the tabs on the battery compartment cover and push down. Insert 2 AA batteries (not included), paying attention to the polarity. Put the battery compartment cover back on and the shaver will be ready for use.

Testing

• The fabric shaver can damage delicate fabrics and very soft materials such as angora. Before removing fluff, always test on a small area of the fabric that is not publicly visible to confirm the speed level is appropriate for the fabric.
• Turn the transparent adjustable spacer to the level “Thick” and then push the On/Off/Speed Switch to Speed Level 1. To test the most suitable speed for your fabrics and avoid damaging the garment, it is recommended to use Speed Level 1 first, then switch up to Speed Level 2.

Shaving Off Fluff

1. Put the garment on a flat surface, such as an ironing board. Make sure the surface has no wrinkles. Otherwise, the garment may be damaged.
2. Turn the spacer to the desired level or remove it completely (see the “Removing/Attaching the Spacer” section of this manual).
   • “Thick” is for large bobbles and coarse textiles; 5mm length distance from the cutting blades.
   • “Thin” is for small lint/bobbles and fine textiles; 3mm length distance from the cutting blades.
   • Removing the spacer is only for very fine lint; virtually no spacing to the cutting blades.
3. Push the On/Off/Speed Switch to the required speed level.
4. Guide the shaver foil lightly over the material. The fluff and bobbles will be shaved off and collected in the fluff collector.
5. To turn off the shaver, push the On/Off/Speed Switch back to Speed Level 0.

Note:

Empty the fluff collector regularly. The fluff collector should never be more than 3/4 full. An overfilled fluff collector will slow the cutting blades no matter the amount of battery power left.

Removing/Attaching the Spacer

• To remove the spacer, hold the shaver with one hand, grab the spacer, put your thumb on the edge of the spacer, pull the spacer forward, and remove it.
• To attach the spacer, place it on the cutting head and press it firmly. Make sure the two small tabs on the spacer grip into the two recesses on the shaver.
• To protect the shaver foil, you should remove the spacer and place the protective cap on the shaver foil when not using the fabric shaver.

Replacing the Cutting Blades

1. To remove the cutting blades – Unscrew the shaver foil, carefully grasp the cutting blades’ edge and pull them out, avoiding damage to the blades.
2. To attach the cutting blades – Grasp the cutting blades’ edge and firmly insert the cutting blades into the shaver body. Finally, screw the shaver foil back into place.
   Warning: Keep the protective cap in place when the shaver is not in use to prevent children from accidentally injuring themselves.

Emptying the Fluff Collector

1. 1. Pull the fluff collector a little way down and lift it off.

2. Empty the textile fluff.
3. Place the fluff collector back on the shaver.

Cleaning the Housing and Cutting Blades

1. Unscrew the shaver foil, spacer, and protective cap, cleaning those parts with a slightly damp cloth.
2. Use the officially provided cleaning brush to remove fluff and lint remnants from the cutting blades.
3. Screw the shaver foil back on when all parts are completely dry.
4. Place the spacer back on the shaver.

Note:

1. Never use any corrosive liquids. These may damage the surface of the shaver.
2. Be careful when handling the cutting blades. They are very sharp and can easily be damaged.

Specifications

• Power Supply: 2 x 1.5V type AA batteries
• Voltage: 3V

The appliance’s packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.

CE Declaration of Conformity

We, 1byone Products Inc., confirm that the appliance as detailed below does comply with all essential requirements of the EMC directive 2014/30/EU and governing EU-regulations as mentioned below.

• Article Description: Fabric Shaver
• Brand Name: BEAUTURAL
• Model Number: 719EU-0001, LT-144
• Applicable Standard(s):
  • EN 55014-1
  • EN 55014-2
  • EN 61000-3-2
  • EN 61000-3-3

UKCA Declaration of Conformity

We, 1byone Products Inc., confirm that the appliance as detailed below does comply with all essential requirements of the relevant U.K. legislation for UKCAmarking and governing UK-regulations as mentioned below.

• Article Description: Fabric Shaver
• Brand Name: BEAUTURAL
• Model Number: 719UK-0001, LT-144
• Applicable Standard(s):
  • BS EN 55014-1
  • BS EN 55014-2
  • BS EN 61000-3-2
  • BS EN 61000-3-3

Customer Service

• UNITED STATES

• Phone: +1 909-391-3888
  (Mon-Fri 9:00am – 5:00pm PST)

• Email: ushelp@1byonebros.com

• CANADA Email: cahelp@1byonebros.com

• UNITED KINGDOM

• Phone: +44 158 241 2681
  (Mon-Fri 9:00am – 6:00pm UTC)

• Email: ukhelp@1byonebros.com

• GERMANY/FRANCE

• ITALY/SPAIN Email: euhelp@1byonebros.com

BRAND OWNER
1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: +1 909-391-3888
www.1byonebros.com

EUROPEAN REPRESENTATIVE

APEX CE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park, New Mallow Road, Cork, T23 AT2P, Ireland

BRITISH REPRESENTATIVE

APEX CE SPECIALISTS LIMITED
89 Princess Street, Manchester, M1 4HT, UK

FAQs

What is the product name of the fabric shaver discussed in the search results?

The fabric shaver discussed in the search results is the BEAUTURAL LT-144 Fabric Shaver.

Which type of blades does the BEAUTURAL LT-144 Fabric Shaver come with?

The BEAUTURAL LT-144 Fabric Shaver comes with 2 replaceable stainless steel blades.

What is the power source of the BEAUTURAL LT-144 Fabric Shaver?

The BEAUTURAL LT-144 Fabric Shaver is battery-operated.

How many speeds does the BEAUTURAL LT-144 Fabric Shaver offer?

The BEAUTURAL LT-144 Fabric Shaver provides 2 speeds for different fabric types.

What is the purpose of the adjustable height spacer on the BEAUTURAL LT-144 Fabric Shaver?

The adjustable height spacer on the BEAUTURAL LT-144 Fabric Shaver safeguards delicate fabrics from cuts or snags.

How many shaving hole sizes does the BEAUTURAL LT-144 Fabric Shaver have?

The BEAUTURAL LT-144 Fabric Shaver offers 3 shaving hole sizes for various fabric and bobble sizes.

What safety feature does the BEAUTURAL LT-144 Fabric Shaver have to protect users?

The BEAUTURAL LT-144 Fabric Shaver includes a safety lock mechanism to prevent accidents when the blade cover is open.

How does the BEAUTURAL LT-144 Fabric Shaver contribute to extending the life of clothing?

The BEAUTURAL LT-144 Fabric Shaver provides a cost-effective solution to remove lint and fuzz, thus extending the life of clothing.

What is the recommended action to remove hard-to-reach pills with the BEAUTURAL LT-144 Fabric Shaver?

To remove hard-to-reach pills, it is recommended to remove the spacer on the shaver foil.

How does the BEAUTURAL LT-144 Fabric Shaver help in maintaining a neat and well-maintained wardrobe?

The BEAUTURAL LT-144 Fabric Shaver efficiently removes lint, fluff, fuzz balls, and bobbles from garments and fabrics, keeping the wardrobe neat.

What is the material of the BEAUTURAL LT-144 Fabric Shaver?

The BEAUTURAL LT-144 Fabric Shaver is made of plastic.

What is the color of the BEAUTURAL LT-144 Fabric Shaver?

The BEAUTURAL LT-144 Fabric Shaver comes in gray.

What additional feature does the BEAUTURAL LT-144 Fabric Shaver offer for user convenience?

The BEAUTURAL LT-144 Fabric Shaver comes with 3 replacement blades for extended use.

How does the BEAUTURAL LT-144 Fabric Shaver help in maintaining the quality of fabrics?

The BEAUTURAL LT-144 Fabric Shaver removes lint, fluff, fuzz balls, and bobbles, ensuring fabrics remain in good condition.

Video-BEAUTURAL LT-144 Fabric Shaver

Download this Manual:BEAUTURAL LT-144 Fabric Shaver User Manual

Reference Link

BEAUTURAL LT-144 Fabric Shaver User Manual- Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>