GENESIS Zircon 550 800 DPI Wireless Gaming Mouse Installation Guide
- June 13, 2024
- Genesis
Table of Contents
GENESIS Zircon 550 800 DPI Wireless Gaming Mouse
Product Information
- Product Name : ZIRCON 550
- Features : Optical, 200 – 8,000 DPI, 100 ips, 7 buttons, dimensions: 128 x 68 x 42 mm
- Specification : Optical, 200 – 8,000 DPI, 100 ips, dimensions: 128 x 68 x 42 mm
Product Usage Instructions
- To install the product, open the main bottom panel and double-click the icon to open the settings interface.
- In wireless mode, use the mouse without any cables.
- In wired mode, connect the mouse using a cable.
- To charge the battery, connect the mouse to a power source. The logo on the mouse will turn green when fully charged.
- Note: If the battery level is too low, the logo will start flashing in white. Charge the battery every 3 months if the mouse is not used for a long time. Using chargers with power over 5V 1A may damage the battery.
For more information, please refer to the user manual available at https://tm.by.
FEATURES
- Precise optical sensor with 8 000 DPI resolution
- Gaming software with profile/macro editor
- Main buttons switches with a lifetime of up to 20 million clicks
- RGB backlight with PRISMO effect
SPECIFICATION
- Sensor type Optical
- Resolution 200 – 8 000 DPI
- Maximum tracking speed 100 ips
- Number of buttons 7
- Dimensions 128 x 68 x 42 mm
Frequency range: 2402MHz – 2480MHz
Maximum radio-frequency power transmitted: -1,896 dBm
INSTALATION
- Connect your device to the USB port of your computer, it is necessary to wait about 15 seconds for the rst connection until the drivers are fully installed.
- The mouse includes software that allows you to set up advanced features, if you want to use these features, you need to download and install the software from our website www.genesis-zone.com
- Open the installation folder and then double-click the setup.exe file.
- Follow the instruction to install the program.
- After a successful installation, the software icon appears on the main bottom panel. Double-clicking the icon opens the settings interface.
MODE
WIRELESS MODE
The mouse will switch to wireless mode automatically if USB cable is not
connected into mouse.
Tips :
- To get the best performance of wireless connection and reduce latency, connect the USB receiver as close as possible to the mouse and make sure that there are no obstacles between the mouse and the receiver that can interfere with the wireless signal.
- In wireless mode set the polling rate to 500 Hz to get better smoothness performance of sensor.
WIRED MODE
The mouse will switch to wired mode automatically once you connect USB cable
to the mouse and computer.
Tips:
- Wired mode others better smoothness performance of sensor than wireless mode, for best results set the polling rate to 1000 Hz.
- Wired mode allows simultaneous using of the mouse and charging the battery.
CHARGING THE BATTERY
- Connect the included USB-C cable to the mouse
- Connect USB plug to a suitable power source (max. output DC 5V 1A)
- When the battery is fully charged, the logo color changes to green.
Note: When the battery level is too low, the logo starts flashing in white.
Caution: Please charge the battery every 3 months, if you do not use the mouse for a long time. Long-term storage of the mouse with low battery level, or using the chargers with power over 5V 1A may damage the battery
PACKAGE CONTENT
- Zircon 550 gaming mouse
- Quick installation guide
REQUIREMENTS
- PC or compatible device with a USB port
- Windows® XP/Vista/7/8/10, Linux, Android
WARRANTY
2 years limited manufacturer warranty
SAFETY INFORMATION
- Use as directed.
- Non-authorized repairs or taking the device to pieces make the warranty void and may cause the product damage.
- Avoid to hit or friction with a hard object, otherwise it will lead to grind surface or other hardware damage.
- Do not use the product in low and high temperatures, in strong magnetic fields and in the damp or dusty atmosphere.
- Do not drop, knock, or shake the device. Rough handling can break it.
- Slots and openings in the case are provided for ventilation and should not be obscure. Blocking the vents can cause overheating of the device.
GENERAL
- The safe product, conforming to the EU requirements.
- The product is made in accordance with RoHS European standard.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. In order to get detailed information about recycling this product please contact your retailer or a local authority.
- Hereby, IMPAKT S.A. declares that that the radio equipment type NMG-1787 is in compliance with Directives 2014/53/UE (RED) and 2011/65/UE (ROHS). The full text of the EU declaration of conformity is available via the product tab at www.impakt.com.pl.
GENESIS. All rights reserved. GENESIS name and logo, and all related product and service names, design marks and slogans are the trademarks or registered trademarks of GENESIS. All other product and service marks contained herein are the trademarks of their respective owners. | V.1260
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>