KOHLER K-706005-L Frameless Sliding Bath Door Instruction Manual
- July 17, 2024
- Kohler
Table of Contents
KOHLER K-706005-L Frameless Sliding Bath Door
Codes/Standards
ANSI Z97.1
CAN/CGSB-12.1
CPSC 16CFR 1201
KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
See website for detailed warranty information. Available Glass Options
Code Description
L Crystal Clear
Features
- Innovative roller design simplifies installation and provides out-of-plumb adjustability while glass is installed
- Cushioned center guide provides smooth, quiet sliding action
- Gently curved towel bars, inside and outside, provide integrated storage on the door
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Tempered glass ensures enhanced safety and durability
Material
- Frameless, 1/4″ (6 mm) thick Crystal Clear tempered glass
Installation
- Sliding bath doo
- Not for use in hospitality
Dimension
Technical Information
Base-To-Wall Radius – Max: 1/2″ (13 mm)
Shower Ledge Min Flat: 3″ (76 mm)
Shower Wall Min Flat: 3-1/2″ (89 mm)
Notes
Install this product according to the installation guide.
If replacing a shower door, the narrow wall jamb design of this door may not
cover the existing shower door holes.
The vertical opening should be a minimum of 62-1/4″ (1581 mm) to allow for
installation clearance.
Customer Support
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada
3-26-2024 19:56 – US
