Cubii Go Fly Wheel Resistance Compact-Under Desk Elliptical User Guide
- June 8, 2024
- Cubii
Table of Contents
Go Fly Wheel Resistance Compact-Under Desk Elliptical User Guide
Using Your Cubii Go
Follow the guidelines below to enhance your experience.
DISPLAY MONITOR
- Press the button under the display to wake it.
- Top Line: Stride count.
- Bottom Line: Cycles between Time, Calories, Distance, and RPM (Revolutions Per Minute).
- Scan Mode: The display will automatically cycle through these metrics.
- Reset The Strides To Zero: Hold button down for 3 seconds.
- To Change The Units Between Miles And Kilometers: Hold button down for 5 seconds.
ADJUSTING THE RESISTANCE
Cubii Go comes with 8 resistance levels. Turn the knob clockwise to increase
the resistance. The higher the number, the higher the resistance. We recommend
you begin at Level 1 and increase the intensity gradually over time.
Please Note: Cubii Go is only to be used while sitting. Do not stand on the
elliptical.
Not for use directly on shag carpet. Place a mat underneath the elliptical.
Consult your physician before starting this or any exercise program.
TRANSPORTING AND POSITIONING
To extend the handle, hold down the handle release button, then pull out the
handle. Hold down the button again to fully retract the handle. The Cubii Go
can be used with the handle extended or retracted. The unit can also be
lifted up to carry like a briefcase or rolled on the floor like a roller
bag.
USING THE CHAIR WHEEL CUP
If you’re using Cubii Go while sitting in a chair with wheels or castors,
follow the steps below:
- Extend the handle by at least 1 position to expose the wheel cup.
- Roll the wheel of your chair into the wheel cup.
Assembly Guide
Cubii Go Compact Elliptical
Remove all of the components from the Cubii Go box.
Included you should find:
A CUBII GO UNIT BODY
B LEFT AND RIGHT PEDALS
D CROSS MEMBER
C M5 ALLEN WRENCH
STEP 1 — Crossbar
Before installing the crossbar, orient the roller wheels to point away from
the body of the unit, and with the screw holes facing up. Lower the unit onto
the crossbar so that the holes line up with the screws. Tighten screws with
the included wrench, taking care not to scratch your Cubii Go.
STEP 2 — Align Pedal
Align the right pedal tube with the tube shaft on the ring of the elliptical.
Insert the pedal tube into the tube shaft and push in until the unit
stops.
STEP 3 — Press and Insert Pedals
Align the pedal wheel with the wheel track on the bottom side of the
elliptical. Once aligned, push the button on the pedal tube and continue
pushing in the pedal into the tube shaft.
STEP 4 — Click and Lock
Continue pushing in the pedal into the tube shaft and wheel track until you
hear a click or the pedal is pushed in all the way. To ensure your pedal is
locked into place, release the button once the pedal is pushed in all the way
and try to pull the pedal outwards. Your pedal should be locked into place.
STEP 5 — Repeat
Repeat steps 2-4 with the left pedal, then get moving!
The Cubii App
DOWNLOAD THE CUBII APP
Available for free where you download mobile applications.
- Personalize your profile and workout goals
- Track activity and see your progress
- Socialize in our one-of-a-kind Cubii CommunitiiTM
- Create or participate in group leaderboards
- And much more!
Find detailed product manual, assembly demo, and warranty details at cubii.com/help
CONTACT
1-844-282-4401
cubii.com/help
support@mycubii.com
® Trademark of Fitness Cubed Inc. Registered in the US.
Documents / Resources
|
Cubii Go Fly Wheel Resistance Compact-Under Desk
Elliptical
[pdf] User Guide
Go Fly Wheel Resistance Compact-Under Desk Elliptical, Go, Fly Wheel
Resistance Compact-Under Desk Elliptical, Under Desk Elliptical, Desk
Elliptical, Elliptical
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>