Cubii F4C1-AQU-CBNA-02 TTotal Body Ellipticals and Striders User Guide
- June 8, 2024
- Cubii
Table of Contents
Cubii F4C1-AQU-CBNA-02 TTotal Body Ellipticals and Striders
Using Your Cubii Total Body+™
Follow the guidelines below to enhance your experience.
ADJUSTING THE RESISTANCE
Cubii Total Body+ has 12 resistance levels. Adjust your workout intensity by
pressing the plus (+) or minus (-) button on the built-in display monitor, or
via the Cubii app. Level 1 is the lowest intensity and level 12 is the
highest. We recommend you begin at Level 1 and increase the intensity
gradually over time.
GETTING YOUR GROOVE
You can use your Cubii Total Body+ in short intervals throughout the day or
for long periods of time. We recommend you begin with a five minute session,
see how your body feels afterwards, and increase your session length gradually
over time. You can also go forwards or backwards on the Cubii Total Body+ to
work different muscle groups.
USING THE RESISTANCE HANDLES
Before using, firmly grasp the handles and place your feet on the pedals or
the base plate of your Total Body+ elliptical. Pull the handles up and out of
the elliptical to a neutral position, and begin your exercise routine. Once
finished, return the handles to their resting position on the elliptical body.
CARRYING AND STORING YOUR TOTAL BODY+
- To store Cubii, simply keep it in a clean dry place.
- Cubii Total Body+ is approximately 20.9”L x 17.6”W x 10.1”H (53.2cm x 44.7cm x 25.7cm)
- Hold the handle to move Cubii. For additional support, place your other hand under the base. Do not use the pedal arms to move Cubii. Ask someone for help if you find it too heavy to lift.
WARNING: The maximum recommended extension of the resistance handles is four feet when using both handles together, and eight feet when using just one. Please do not extend beyond this threshold. Please only use resistance handles while seated.
READING THE DISPLAY CONSOLE
-
User Options: Press the USER button to switch between User 1, User 2, and Guest. Current selection indicated by a triangle.
-
Top Row: The top row displays your total number of strides. A “stride” is the equivalent of one full rotation of the pedaling motion.
-
Middle Row: The middle row displays the resistance level through both a resistance meter and the resistance level number. For example, when you are at full resistance, the resistance meter will be completely solid and the number will read “12”.
-
Bottom Row: The bottom row displays the metrics:
- TIME elapsed during active workout
- DISTANCE (mi or km) pedaled
- CALORIES burned
- RPM rotations per minute (pedaling speed)
Press the MODE button to switch between metrics. Use the SCAN mode to automatically toggle between metrics every 7 seconds.
-
Bluetooth® Wireless Technology Features: The Bluetooth® symbol flashes when available to connect to a device. The symbol remains solid when connected to the Cubii app. The elliptical must be charged to pair with a device.
-
Battery Indicator: The number of bars in the battery symbol indicates battery charge remaining. The symbol will flash for 20 seconds when unit requires recharging. The symbol flashes while charging and remains solid when charging is complete. The symbol disappears when not plugged in.
-
Distance Metric Toggle: To switch between miles and kilometers, use the MODE button to select the DISTANCE metric, then hold the MODE button for 6 seconds.
-
Manual Data Reset: Manually reset workout data for any profile by selecting the profile, then hold MODE for 3 seconds. This resets data displayed on the screen for the selected profile.
See the included Owner’s Manual for more features, such as creating a “Smart Reset” to automatically reset workout data each night, or for info on unlinking profiles from the console. Please Note: Cubii Total Body+ is only to be used while sitting. Do not stand on the unit.
Assembly Guide
Cubii Total Body+ Compact Elliptical
Remove all of the components from the Cubii Total Body+ box. Included you
should find:
- A CUBII TOTAL BODY+ MAIN BODY
- B LEFT AND RIGHT PEDALS
- C LEFT AND RIGHT PEDALS
- D SCREWS (X4)
- E SCREWDRIVER
- F CHARGING CABLE
- G AC POWER ADAPTER
STEP 1 — Align
Align the right pedal with the right arm. Insert the bottom of the pedal into
the two small holes.
STEP 2 — Flip
For maximum support, make sure you flip the pedal you are assembling so it is
at the bottom and close to the base.
STEP 3 — Screw
With a screwdriver, screw in the pedal until tight. Make sure it does not
wobble.
STEP 4 — Repeat
Repeat steps 1-3 with the left pedal.
CHARGING YOUR TOTAL BODY+
The charge port is located above the crossbar near the front of the unit. Once
plugged in, the screen will power on and the lightning bolt symbol will flash
to indicate the unit is charging. The symbol will remain solid when it is
fully charged.
The Cubii App
*BLUETOOTH® APP FEATURES**
The app supports many features such as:
- Personalize your profile and workout goals
- Track activity and see your progress
- Digitally adjust resistance
- Create or participate in group leaderboards
- Chat with friends and socialize in our one-of-a-kind Cubii Communitii™
- and much more!
*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Fitness Cubed Inc is under license. Other trademarks and trade names are those of their respective owners.
INSTALLING THE CUBII APP
The Cubii app is currently available on your app store by searching for
“Cubii”. For more detailed information on downloading, installing, or using
the Cubii app, see the included Total Body+ Owner’s Manual.
PAIRING WITH THE CUBII APP
To pair with the Cubii app, please follow these instructions:
- Start pedaling to trigger the Bluetooth® signal. You’ll see the Bluetooth® symbol glow and start blinking on the display console.
- Confirm that you’ve enabled Bluetooth® Wireless Technology in your device’s settings.
- The app will detect your Cubii elliptical via Bluetooth® Wireless Technology. Select your elliptical in the app.
- Once successfully paired, the Bluetooth® symbol will stop blinking.
- Select if you would like to become User 1, User 2, or proceed as Guest.
- Start your workout and enjoy your Cubii experience
From here on, every time you launch the app, it will search for all Cubii devices in your vicinity and automatically connect with an elliptical that it has already paired with. If it does not automatically reconnect, you can manually reconnect in the app.
Find Your Comfort Zone
Find the seat configuration that suits you most. If you feel there is not enough room between your knees and the desk, push your Cubii Total Body+ away from you and lower the chair height.
SECURING YOUR CHAIR
If you’re using Cubii Total Body+ while sitting in a chair with wheels or casters, follow the steps below:
- Find the Wheel Stopper that is included with your Total Body+.
- Lift up the back of your Cubii Total Body+ and place the interfacing portion of the wheel stopper under the base plate. The nub goes through the anchor hole.
- Roll one wheel from your chair onto the circle of the stopper until it is snug in place.
- If you feel you are too close to your Cubii, the wheel stopper can be detached from the base plate and positioned in the location that is best for your needs.
Find detailed product manuals, assembly instructions, and warranty details at cubii.com/manuals
CONTACT
1-844-282-4401
cubii.com/help
support@mycubii.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>