Cubii F43216 Self Powered Walking Treadmill Owner’s Manual

Cubii F43216 Self Powered Walking Treadmill

Product Information

The Cubii Pace is a self-powered walking treadmill designed to help you stay active and fit. It provides a convenient way to exercise at home or in the office, allowing you to improve your cardiovascular health and burn calories while working or watching TV.

Specifications

• Product Size: [Insert product size]
• Product Weight: [Insert product weight]

What’s in the Box

• Cubii Pace walking treadmill
• Screws and tools for assembly
• Warning labels
• Pinch point label

Product Usage Instructions

Assembling Your Unit

1. Refer to the Owner’s Manual for detailed instructions on how to assemble the Cubii Pace.
2. Ensure that two people are available for assembly.
3. Inspect the components for any signs of wear or damage before assembly.
4. Tightly secure all screws and components during assembly.

Using Your Cubii Pace

Folding Instructions

If your Cubii Pace model is foldable, follow these steps to fold and unfold the treadmill:

[Insert folding instructions]

Emergency Dismount

In case of an emergency or if you feel unsafe, follow these steps to dismount from the Cubii Pace:

[Insert emergency dismount instructions]

Moving the Treadmill

If you need to move the Cubii Pace to a different location, follow these steps:

[Insert moving instructions]

Belt Adjustment

To ensure smooth and comfortable walking, you may need to adjust the belt tension. Follow these steps to adjust the belt:

[Insert belt adjustment instructions]

Charging the Battery

If your Cubii Pace model has a built-in battery, follow these steps to charge it:

[Insert charging instructions]

Adjusting the Resistance

If your Cubii Pace model has adjustable resistance levels, follow these steps to adjust the resistance:

[Insert resistance adjustment instructions]

Display Monitor

The display monitor provides important information about your workout. Follow these steps to use the display monitor:

[Insert display monitor usage instructions]

Manual Data Reset

If you want to reset the data on your Cubii Pace, follow these steps:

[Insert manual data reset instructions]

Daily Smart Reset

The Cubii Pace has a daily smart reset feature that allows you to reset your daily workout data automatically. Follow these steps to enable or disable this feature:

[Insert daily smart reset instructions]

General Information

Warranty

The Cubii Pace comes with a [Insert warranty duration] warranty. Please refer to the Owner’s Manual for more information on the warranty terms and conditions.

Troubleshooting

If you encounter any issues with your Cubii Pace, please refer to the Troubleshooting section in the Owner’s Manual. If the problem persists, contact our customer support at 1-844-282-4401 or [email protected].

Care and Maintenance

To ensure the longevity and optimal performance of your Cubii Pace, follow these care and maintenance guidelines:

[Insert care and maintenance instructions]`

Regulatory Notices

The Cubii Pace complies with all relevant regulatory standards. For more information on regulatory compliance, please refer to the Owner’s Manual.

FAQ

Q: Can I use the Cubii Pace if I have never exercised before?

A: It is recommended to consult your physician before starting any exercise program, especially if you have never exercised before or have any health problems.

Q: Can children use the Cubii Pace?

A: No, children should not be allowed to use or play on the Cubii Pace. Keep children and pets away from the treadmill for safety reasons.

Q: Can I position the Cubii Pace on uneven surfaces?

A: No, the Cubii Pace should be placed on a solid, level surface for safe operation. Do not position it on loose rugs or uneven surfaces.

Q: How do I adjust the resistance on the Cubii Pace?

A: If your Cubii Pace model has adjustable resistance levels, follow the instructions in the Owner’s Manual to adjust the resistance.

Q: How do I reset the data on my Cubii Pace?

A: You can manually reset the data on your Cubii Pace by following the instructions provided in the Owner’s Manual.

Q: How do I enable or disable the daily smart reset feature?

A: The daily smart reset feature can be enabled or disabled by following the instructions in the Owner’s Manual.

Product information and manuals in additional languages can be found online or by scanning the QR code.
manuals.cubii.com

Welcome to the Cubii Communitii®!
Congratulations on taking the next step on your fitness journey with the Cubii Pace! Before you begin, we want to make sure you set up your new self-powered walking treadmill safely so you can get the most out of your Cubii experience.
Let’s review the safety notes and warnings now.
If you have any questions, please contact:
1-844-282-4401
[email protected]
cubii.com/help

BEFORE YOU BEGIN

Safety Warnings & Instructions

• WARNING Consult your physician before starting this or any exercise program. This is especially important if you have never exercised before, are pregnant, or suffer from any health problems. If at any time during exercise you feel faint, dizzy, or experience pain, stop and consult your physician.
• WARNING To reduce the risk of serious injury, read the following Safety Instructions before using Cubii Pace.
• WARNING Wear sturdy, closed-toed shoes when using Cubii Pace.
• WARNING Pinch point. Keep hand clear.

1. Read all warnings and cautions posted on the Cubii Pace unit.
2. Cubii Pace should only be used after a thorough review of the Owner’s Manual.
3. We require that two people are available for assembly of this product.
4. Do not allow children to use or play on Cubii Pace. Keep children and pets away from Cubii Pace.
5. Set up and operate Cubii Pace on a solid, level surface. Do not position Cubii Pace on loose rugs or uneven surfaces.
6. Make sure that a minimum of 6.5’ (1.98m) on all sides is available for access to and around Cubii Pace.
7. Before using, inspect Cubii Pace for worn or loose components. Securely tighten or replace any worn or loose components prior to use.
8. Do not wear loose or dangling clothing while using Cubii Pace.
9. Follow your physician’s recommendations in developing your own personal fitness program.
10. Always choose a workout plan which best fits your fitness and ability level. Know your limits and train within them. Always use common sense when exercising.
11. Be careful to maintain your balance while using, mounting, dismounting, or assembling Cubii Pace; loss of balance may result in a fall and serious bodily injury.
12. Keep both feet firmly and securely on the Cubii Pace while exercising.
13. Maximum recommended user weight is 300 pounds (136 kg).
14. Cubii Pace should be used by only one person at a time.
15. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems.
16. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
17. Do not place fingers or objects into the moving parts of the equipment.

Consult Your Physician

It is always important to consult your physician before starting an exercise program. This is particularly true if any of the following apply to your current medical condition:

• Chest pain or pain in the neck and/or arm
• Shortness of breath
• A diagnosed heart condition
• Joint and/or bone problems
• Currently taking cardiac and/or blood pressure medications
• Have not previously been physically active
• Dizziness or blurred vision
• Those with physical handicaps
• If you feel any of the physical symptoms listed above when you start your exercise program, contact your physician right away.

GETTING STARTED

Product Size and Weight
Net Weight: 88.2lb (40kg)
Product Dims: 50.4” x 28.9” x 52.8”H (128.1cm x 73.5cm x 134cm)

What’s In The Box

1. Cubii Pace Treadmill
2. Supportive, Foam Handles
3. 2x Treadmill Upright Caps
4. 1x Cubii Treadmill Console
5. 6 X Screw
6. 6 X Washers
7. 2 X Allen Keys
8. Cubii USB-C Charging Cable
9. Cubii Power Brick For Charging Cable

Screws and Tools

Warning Labels

The warning label is located on your Cubii Pace here:

Pinch Point Label Location

The pinch point label is located on your Cubii Pace here:

Serial Number Location

The serial number is located on your Cubii Pace product label and the content panel of the box.

ASSEMBLING YOUR UNIT

WARNING Two people required for assembly.
Follow the steps below to assemble your Cubii Pace.

• Step 1 — Carefully remove your Cubii Pace from the box and place flat on the floor. The unit should look like the image below.

• Step 2

  • A: Lift the uprights until they are in an upright position, perpendicular to the base of the treadmill.
  • B: Lower the uprights into the slots until they are completely secure and unable to move.

• Step 3 — Using screws (B), two of the washers (C), and Allen wrench (E), align the holes of the inner tube with the outer stabilizer housing. Once aligned, screw in each side until tight.

• Step 4 — Note, there are screws pre-fastened to the handlebars to allow for them to hang on the upright. Do not remove these screws. They make assembly in the next step much easier.
  Take the foam handlebars (part 2) and lower them onto the U-shaped intention on the upright. Use allen wrench (E) and tighten the screws.

• Step 5 — Using screws (D), washers (C), and Allen wrench (E), align the holes on the outside of the uprights with the holes in the foam handles (part 2). Insert screws (D) into the holes making sure they engage with the handles on the other side and tighten until secure.

• Step 6 —
  Take the caps (Parts 3) and insert them into the holes at the top of the uprights. Make sure to look underneath before inserting to make sure they are facing the right direction. The bottom of each cap will have an arrow and the word, “FRONT” indicating the correct direction. The arrow should be pointing towards the crossbar of the treadmill.

• Step 7 —

  • A: Remove the console (PART 4) from the packaging and connect it to the wire protruding from the crossbar as outlined in Diagram A. Make sure the connector is aligned correctly to prevent damaging the unit. The connection should fit together seamlessly.
  • B: Carefully hook the console to the hole in the crossbar. The console should rest there safely without moving while you proceed to the next step.

• Step 8 — Using the remaining screws (A), two washers (C), and the Allen wrench (E), secure the console to the crossbar by aligning the holes and tightening the screws until secure.~

• Your Cubii Pace Treadmill is now fully operable. Before beginning your wellness journey, please see below for operating and safety instructions.

USING YOUR CUBII PACE

Make sure to have followed all of the assembly steps in the Owner’s Manual before you begin using Cubii Pace.

Folding Instructions Folding
Lift up the rear end of the treadmill deck until the hydraulic lowering assist cylinder is locked in place (user should hear a clicking sound).

Unfolding
With one hand, hold and lightly push the rear end of the treadmill deck towards the console. Using your foot, lightly press down on the blue part of the hydraulic lowering assist cylinder and then gently pull on the rear end of the treadmill deck. Once the treadmill deck has been pushed down, it will automatically continue to steadily lower itself until it reaches level ground.

This icon indicates where you should press with your foot to release the treadmill deck.

CAUTION

• Do not step on the treadmill deck while it is automatically lowering. Wait until the treadmill deck has completely stopped and is securely on the ground before stepping onto the treadmill.
• Do not fold the unit while the belt is moving.
• Do not operate the unit in the folded position.

Emergency Dismount
Be aware of your body’s signals.
If you feel uneasy or unable to continue using the unit, place your feet on the top steps of the treadmill and firmly grip the handlebars.
Wait until the belt slows down to a complete stop before safeley dismounting.

Moving the Treadmill
Before attempting to move the treadmill, please make sure the unit is securely folded. To tilt, place your hands on the blue, foam handlebars. Next, place your foot at position A and pull the handlebars towards the ground until the wheels are engaged, and you can safely move the unit.
Once the wheels are engaged, move the treadmill to a desired location and tilt it back into the upright position where the wheels are no longer engaged.

Belt Adjustments

After prolonged use, your Pace’s belt may begin to drift or skew from its center position. Follow these easy instructions to realign the belt to the center.

Adjusting the Belt From the Right Back to Center
Locate the right-side adjustment bolt through the plastic cap on the right rear frame. Using Allen Key (F), turn the bolt ¼-turn clockwise.

Walk on your Pace for approximately 30 seconds and note how far the belt has moved to the left, towards center.

Repeat Steps 1 & 2 until the belt has returned to the center position.

Once you belt has reached center, turn the right bolt 1/8-turn counterclockwise to stabilize its movement.

If you need to adjust your belt from left back to center repeat these instructions on the opposite side of the machine.

Charging the Battery
Plug your Cubii USB-C charging cable and charging brick into the wall. On the right side of the console is a port to insert the USB-C cable. Plug in the unit until the battery indicator is at the desired charge level.

Adjusting the Resistance

There are 10 levels of resistance on the tension knob.
Number 1 is the lowest, and 10 is the highest level of resistance. Increase tension: Turn the knob counterclockwise.
Decrease tension: Turn the knob clockwise.
Please consult with a physician if you have any concerns over level of resistance. The higher the number the more challenging the workout, so please choose your resistance appropriately.

Display Monitor
You can track your workout using the LCD Screen.

Press the mode button to change between the metrics listed below:

1. Time (0:00-99:59 hour:min)
2. Speed (0-999.9 mph/kph)
3. Distance (0-999.9 mi or km)
4. Calories (0-999.9 kcal)
5. Scan (Automatically rotates between Time, Distance, Calories and Speed metrics)
   • Press the user button to change the user of the console from User 1 > User 2

   Guest

Manual Data Reset
Manually reset data for any profile on the console (User 1, User 2 or Guest) by selecting the relevant profile and then holding the User button for 3 seconds then release the button to complete the profile reset. This action resets any data displayed on the screen for the selected profile.

Daily Smart Reset
Manually Set a “Smart Reset” if you want your console to reset each evening at midnight, follow the instructions below to set the clock to the current time:

1. Simultaneously press the USER and MODE buttons 3 times in a row to reset the clock. It should flash “00:00”.
2. Press the USER button to cycle through hours until you get to the right hour. Note that the clock uses military time.
3. Press the MODE button to cycle through minutes until you get to the right minute.
4. Once you have entered the current time, simultaneously press the USER and MODE buttons 3 times in a row to save the time.

If there is no activity for more than 5 seconds during this process, the reset will be cancelled. The “smart reset” feature is ONLY activated if the user performs the manual actions above to set the RTC on the console. If you do not choose to manually set the clock following the instructions above, your console will continue to add and display all data until you manually reset the screen. Please note the “smart reset” function and clock setting will only remain while the battery retains enough capacity to power the device. If the battery is depleted, the “smart reset” feature must again be manually established using the above instructions.

GENERAL INFORMATION

Warranty
For more information about how to register your unit our warranty, scan the QR code at the beginning of the manual, call our Customer Service number +1-844-282-4401 or visit Cubii.com.
We strongly recommend keeping the original box in the event of a warranty claim.

Troubleshooting
For troubleshooting and assistance with your Cubii Pace, you can email us at: [email protected].

Care and Maintenance
The safety and integrity designed into Cubii Pace can only be maintained when Cubii Pace is regularly examined for damage and wear. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

Special attention should be given to the following:

• Periodically wipe the unit down with a damp cloth.
• After excessive use, the treadmill belt may begin to drag or make abnormal sound. This could be an indication that your belt needs to be lubricated. Email [email protected] for help.
• If you experience any product issues including missing or damaged parts, please contact [email protected].
• Only Fitness Cubed, Inc. supplied components shall be used to maintain/repair Cubii Pace.

Regulatory Notices

1. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

Battery: 18650 / 2200mAh / 3.7V / DF3-3S-2C
Model: TR01
Rated: 2200mAh
Date: XXXXXX

Battery Warning
SHENZHEN MOTTCELL NEW ENERGY TECHNOLOGY CO., LTD Warning: Risk of fire and burns. Do not open, crush, heat above 45°C or incinerate. Follow manufacturer’s instructions.
CAN ICES-003 (B) / NMB-003 (B)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Model No: TR01
Product Weight: 88.2lb (40kg
Gross Weight: 107.8lb (48.9kg)
Product Size: 50.4” x 28.9” x 52.8”H (128.1cm x 73.5cm x 134cm) Packaged Size: 52” x 30.3” x 13”H (132cm x 77cm x 33cm) Maximum Bearing Weight: 300lbs. (136.08kg)
Durability Class: HC
For consumer use only. For indoor use only.
Designed in Chicago, IL
320 W. Ohio St. Suite 700, Chicago, IL 60654

Customer Support
[email protected]
cubii.com/help
+1-844-282-4401

References

• Cubii UK | Under Desk Compact Ellipticals | Home Workout Fitness
• Cubii - Stay active, anywhere.
• Manuals

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>