SIHOO M76 Ergonomic Office Chair Installation Guide
- June 8, 2024
- SIHOO
Table of Contents
SIHOO M76 Ergonomic Office Chair Installation Guide
Model:M76
SIZE：636291.5(99.5)CM
Hello Friend,
Thank you for choosing SIHOO office chair.
If you need an installation video, you can enter the keyword “SIHOO Amazon Office Chair Installation Guide” on Youtube to find it.
The chair comes with product warranty service. If there is any problem with the chair, please contact our after-sales service department on SIHOO store immediately, and believe that they will provide you with a satisfactory solution. If the chair meets your needs, welcome to share your feelings on Amazon.
Please feel free to contact us via the following email:
(US) export008@sihoo.cn
(EU and UK) export005@sihoo.cn
(JP) export012@sihoo.cn
(IN) export019@sihoo.cn
Thank you for being one of our customers. We love our customers, if you need us, we will always be here.
SIHOO
CAUTION !
Work on gas springs only by trained specialist personnel.
Installation and commissioning
- Installation and commissioning.
- Check whether the parts are complete and damaged.
- Choose a spacious and clean site when assembling. Paper is laid flat on the ground to prevent parts from colliding with the ground during installation.
- Use a soft flannel to remove the dirt on the furniture surface after installation. DO NOT wipe the furniture with a rag with gravel.
Pls read the Safety Instructions below carefully
- Please use on the flat floor and one chair can only bear one person’s weight;
- To avoid using the wrong screws, please fix all the screws before tightening them;
- Please don’t let the child sit on the chair alone if he is under 5 year-old;
- Please don’t sit on the armrest, in case cause some danger;
- Do not stand on the chair or use it as a ladder or footsteps;
- Please don’t put overweight on the chair, or used as trolley;
- Don’t use sharp or hooked objects to scrape the chair and do not get it close to the fire;
- To avoid any harm to your fingers, don’t insert them into the mechanism while sitting .
Functions
(The size will be according to regular practice)
Parts list
(The size will be according to regular measurements; One more as a backup)
Assemble Introduction
(The size will be according to regular measurements ）
Notice: Before installation, pls classify the screw, measure the screw lengh for easy assemble
1. Gas spring – safety notice
The gas spring unit may be assembled by non-professionals.
Caution: Work on and replacement of the gas pressure spring may only be
carried out by trained specialist personnel.
2. Adjusting the backrest You
can only adjust the counter-pressure of your weight under the backrest if the
backrest is under pressure.
3. Seat height adjustment (8CM)
The seat height of your swivel chair can be steplessly adjusted in height
using a gas pressure spring. To do this, pull the lever under the seat on the
right upwards: the seat height can be adjusted. When you unload the seat, the
seat goes up. When loaded, the seat goes down. Release the lever: the
seat height is fixed.
Tip: You are sitting correctly when your thighs and lower legs form an
angle of about 90 degrees.
4. Adjusting the inclination of the body rest (100-120°)
The bodyrest adjustment (tension of the backrest) is adjusted quickly using
the lever on the right under the seat. Lever outwards: unlocking the backrest.
Push the lever inwards: the backrest angle is locked.
Caution: When the backrest is locked, a certain amount of pressure is required
to release the adjustment (only if there is no backrest pressure).
5. Armrests/arm supports (77°)
The height of the boom can be adjusted without tools. The armrest can be
freely adjusted up and down.
Tip: The armrests effectively relieve the spine, shoulder girdle and arm
muscles when the upper and lower arms form an angle of around 90 degrees.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>