ANALOG DEVICES LT3471 Precision High Voltage Current Drive User Guide

June 3, 2024
Analog Devices

ANALOG DEVICES LT3471 Precision High Voltage Current Drive User Guide
ANALOG DEVICES LT3471 Precision High Voltage Current
Drive

USER GUIDE

This document is interactive. You can click on any underlined text to navigate through the document.

For the resources:

Resources

The Power Components are listed on the Appendix, and you may click on the part to go through its product page online.
Resources

For the individual pages:

Individual Pages

Non-isolated; Multichannel

With ADA4870 Driver
With LT1210 Driver

Product Overview

Controller

Non-isolated; Multichannel

With ADA4870 Driver
With LT1210 Driver

Product Overview

Controller

PART # DESCRIPTION
LT3471 Dual 1.3A,

1.2MHz Boost/Inverter in 3mm ×3mm DFN
LT3757A| Boost, Flyback, SEPIC and Inverting Controller
LT8570| Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft-Start and Sync.
LT8604| High Efficiency 42V/120mA Synchronous Buck
LT8608| 42V, 1.5A Synchronous Step-Down Regulator with 2.5μA Quiescent Current
LT8609| 42V, 3A Synchronous Step-Down Regulator with 2.5µA Quiescent Current
ADP7118| 20V, 200mA, Low Noise, CMOS LDO Linear Regulator
ADP7182| –28V, −200mA, Low Noise, Linear Regulator

POWER REQUIREMENTS

PARAMETER STAGES PMU DAC & ADC Driver
Part # AD5522 [1]

[2]| ADA4870 LT1210
Pin| AVDD| AVSS| DVCC| VCC/V+| VEE/V-
Supply Voltage| V| 15| -15| 5| [1] [2]| 20

15

| -20

-15

Supply Current| mA| 36| -36| 1.5| [1] [2]| 33

65

| -33

-65

PSRR| dB| 45 (100kHz)| 50 (100kHz)| 80 (100kHz)| [1] [2]| 48 (1MHz)

31 (1MHz)

| 60 (1MHz)

29 (1MHz)

Note 1: The supply currents indicated are the maximum quiescent current of the supply rails. For overall full load or short circuit current specifications, refer to the datasheets of the signal chain components.
Note 2: The supply voltages indicated are the values for typical applications.
Note 3: Consult the corresponding datasheets for details on power dissipation if needed.
Note 4: The actual supply current requirement shall be multiplied depending on the number of channels on the signal chain.

©2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the
property of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Analog Devices User Manuals

Related Manuals