Neomounts WL35S-910BL16 TV Pillar Mount Instruction Manual

Neomounts WL35S-910BL16 TV Pillar Mount

Dimension

PARTS

Installation instructions

Step 1
Remove the decorative covers and prepare the pillar mount for installation

STEP 2
Tighten the straps around the pillar and secure them. Cut off the excess material

STEP 3
Install the pillar plate and place the decorative covers

STEP 4
Install the adapter brackets and use spacers if necessar

STEP 5
Place the screen onto the bracket, level and secure it

STEP 6
Adjust the torque for the desired tilt position

OPTION

Lock the bracket with the anti-theft hex key

STEP 7
Pull the straps to release the screen

STEP 8
Open the strap ratchet to release the tension from the straps and to remove them from the pillar

CAUTION

1. To ensure safety, please read this manual carefully before installation and follow the instructions. store this manual in a secure place tor future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
4. it is recommended that the mount be installed by qualied personnel only.
5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
6. Please carefully inspect the area where the mount is tO be installed:
   • AvOId places that are subject to high temperatures, humidity or contact with water
   • Do not install the product near air conditioning vents or areas with excess dust and fumes.
   • Only install on vertical walls and avoid slanted surtaces.
   • Do not install in places subject to any shock or vibration.
   • Do not install in places subject to direct exposure to bright light, as tt may cause eye fatigue when viewing the display panel.
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
9. The wall, celling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. Ihe mounting location must be able to ithstand earhquake or another strong shock.
10. DO not modry any dccessornes or use Droken parts. Lontact your oedier witn dny quesions.
11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
13. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
14. Please consult the English language manual for any dispute on conditionsS.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>