Neomounts WL35S-950BL19 TV Wal Mount Instruction Manual

Neomounts WL35S-950BL19 TV Wal Mount

TV wall mount

TOOLS

PARTS

ASSEMBLY

STEP 1

A. Install the adapter brackets and use spacers if necessary

B. Install the adapter brackets and use spacers if necessary

STEP 2

Adjust the bracket to the desired width

STEP 3

A. Install the wall plate on a wooden stud

B. Install the wall plate on a solid brick or concrete wall

STEP 4

Adjust the tilt mechanism to the desired position

STEP 5

Adjust the torque

STEP 6

Place the TV onto the wall plate, level and secure it

OPERATION

Attach a padlock (not included) as desired

STEP 7

Pull the straps to release the screen

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual ina secure place for future reference.

2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.

3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or
   acts of nature, such as earthquakes or typhoon.

4. It is recommended that the mount be installed by qualihed personnel only.

5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.

6. Please carefully inspect the area where the mount is to be installed

7. Avoid places that are subject to high temperatures, humidity or contact with water.

8. Do not install the product near air conditioning vents or areas with excess dust and fumes.
   Only install on vertical walls and avoid slanted surtaces.

9. Do not install in places subject to any shock or vibration.
   Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.

10. Maintain sufficient space around the display to ensure adequate ventilation.

11. To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.

12. The wll, celing or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or another strong shock.

13. Do not modity any accessories or use broken parts. Contact your dealer with any questions.

14. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).

15. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.

16. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 year

17. Please consult the English language manual for any dispute on conditions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>