TEAC True Wireless Earbuds with Wireless Charging TWSMJV6 User Manual

Product Specifications

Bluetooth version: 5.0
Frequency: 2.40 GHZ – 2.48 GHZ
Receiver sensitivity: -92dBm
Working temperature: -10 – 50°C
Working distance: Up to 10-12M

Charging case battery voltage/capacity: 3.7V / 600mAh
Headphones battery capacity: 2 X 3.7V / 55mAh
Headphones charging time: about 1 hour
Playing time: about 5-6 hours x 5 times
Supported protocols: HFP / AIDP / AVRCP

1. Earbuds are set to stereo mode before leaving the factory.

2. The earbuds will turn off if they are not connected to any
   device within 5 minutes.

3. The iPhone displays the earbuds power in real time.

4. When not use, please store the charging case and earbuds in
   a dry well ventilated place, and charge it every 3 months.

5. Waterproof grade is IPX4. Please do not put the earbuds or
   charging case into water.

Accessories

Headphones Usage

In order to get the best audio experience, please wear the left
and right headphones correctly and choose the ear cap that is
most suitable for your ears. When using outdoors, please put
your mobile phone on the same side as your left ear.
Medium-sized ear caps will produce a better bass effect.

Power-on

Method 1
Auto Power On: Earbuds will power on after being
taken out of the charging case.
Voice prompt: “Power On” one earbud breathing
light on while the other off

Power-on

Method 2
Manual Power On: When
the earbuds are switched 
off, short pressing the
multifunctional touch key
for two seconds can start
the earbuds, and the
indicating light will flash
with a “power on” tone.

Press the
multifunction touch
button for 2
seconds

Power-off

Long press the touch key for 
about five seconds, the
indicating light will flash and
the headphones will power
off with a “Power off” tone.

Note: When the two earbuds are paired and working
together, only one of them needs to be powered off;
the other will be powered off automatically.

Binaural Mode

1. Open the Settings on your mobile and turn on Bluetooth
2. Open the charging case, remove the
earbuds, and wear them properly (left in
left ear and right in right ear)

First Connection

3. You will hear “Power on” after wearing earbuds. Left and right earbuds are paired automatically. You will hear “Connected”.
4. Open your mobile phone Bluetooth settings, find
“TWSMJV6” in “OTHER DEVICES” and press to connect.
5. Wait for 1-2 seconds for the Bluetooth to connect, once
connected you will hear the “Connected” indicating tone. Once connected your mobile device will also show that the “TWSMJV6” is connected under Bluetooth settings.

Non-First Connection

3. When correctly wearing 
the earbuds, the left and
right earbuds will pair up
automatically when the user
hears a “Power on” tone.
4. Wait for 1-2 seconds for
the Bluetooth to connect,
once connected you will hear
the “Connected” indicating
tone. Once connected your
mobile device will also show
that the “TWSMJV6” is connected under Bluetooth settings.

Monaural connection of earbud

The below settings apply for for
both the left and right earbuds

1. Find “Settings” of 
   mobile phone
   – start the “Bluetooth

2. Open the charging
   case, take out the left or
   right earbud, and
   correctly wear it on the
   corresponding ear.

3. After wearing the earbud you will hear the “Power
   on” prompt. Access your mobile phone Bluetooth
   settings, find “TWSMJV6” in other devices and press
   to connect. Wait for 1-2 seconds for the Bluetooth to
   connect, once connected you will hear the
   “Connected” voice prompt. Once connected your
   mobile device will also show the “TWSMJV6” as
   connected under Bluetooth settings.

Non-First Connection

4. After wearing the earbud you will hear
the “Power on” prompt, and it will be paired
successfully automatically. Hearing the tone
”connected” indicates the connection is
successful.

Voice Assistant

Clicking the multifunctional touch key continuously for
three times can start the Siri voice commands.

Revert to

Binaural mode

If the user wants to start the binaural mode but the earbuds
are still in the single-earbud mode, simply put both earbuds
back into the charging case and take them out again, the
earbuds will go back to binaural function. This can also be
done by manually restoring to default settings.

Restore to default settings

1. With a single earbud off, press and hold for
   5 seconds until the breathing light flashes quickly.

2. Tap the earbud 5 times rapidly until no light to reset it to
   factory settings.

3. Put the earbuds into the charging case to enter the
   charging mode. Then take out the earbuds and hold
   them close together. The 2 earbuds will get paired
   automatically. Or press the 2 earbuds at same time for
   2 seconds to power on.

NOTE: The above steps need to be done to both
earbuds at the same time. The 2 earbuds are
paired before leaving the factory. The earbuds will
automatically reconnect after being turned on
when they are connected to the same device.

Charging Case Power

The number of flashing
indicator lights indicates the
remaining power level:
4 lights: 75%-100% power   
3 lights: 50-74% power
2 lights: 25-49%
1 light: 1%-24% (the case
will need to be recharged)

Charging the Case
The breathing lights will flash constantly
when charging and automatically turn
off when fully charged.
Use either a type C
cable or wireless
charger to charge – the
indicator light is red
when charging and blue
when fully charged

Charging the Earbuds

The breathing lights will flash constantly
when charging and automatically turn
off when fully charged.

Playing Music

1. Click multi-touch key to play/pause

2. Press and hold the multi-touch key for 2-3
   seconds (L previous song, R next song)

3. Double tap the multi-touch key to
   increase or decrease the volume.

Phone Call

When there is an incoming call, click the
earbud multi-touch key to answer or press
and hold for 2-3 seconds to reject. 2.During a
call, clicking the earbud multi-touch key will
end the call and return to the previous state

In stereo mode, L to decrease volume and R
to increase volume. When volume reaches its
minimum or maximum a beep will sound. In
mono mode, you will hear a beep when
volume reaches maximum and then volume
will decrease.

Troubleshooting

TERMS AND CONDITIONS

Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.

1. TEAC warrants that this product is free from
   defects in material and workmanship under normal
   domestic use with reasonable care and skill.
   Maintenance and cleaning (i.e. laser head) is not
   covered by this warranty. The TEAC warranty only
   applies to TEAC products purchased NEW from a TEAC Authorised Retailer in Australia. This warranty only
   applies to the original purchaser and cannot be
   transferred.

2. The benefits to the consumer given by this Warranty are
   in addition to other rights and remedies
   of the consumer under a law in relation to goods or
   services to which the warranty relates, being
   the Australian Consumer Law.

3. Refund or replacement via your TEAC Authorised
   Retailer is available for a period of 14 days after purchase
   for goods that have been inspected and determined to
   have a major failure.
   Refund and exchange is not applicable for change of
   mind.

4. Subject to the terms herein, this warranty effectively
   covers TEAC products under the 12 Month Replacement
   Warranty Scheme, 12 months from the date of original
   purchase.

5. 5. The warranty is void and warranty claims may be
   refused, subject to the Australian Consumer Law, if:
   a) The product was not transported, installed, operated or
   maintained according to manufacturer
   instruction, or
   b) The product was abused, damaged, tampered, altered
   or repaired by any unauthorised persons,
   or
   c) Product failure is due to accidents during use,
   installation or transit, power surges, use of defective or
   incompatible external devices, exposure to abnormal
   conditions such as excessive
   temperatures or humidity, or entry of liquids, objects or
   creatures into the product, cockroach infestations, or
   d) The customer is unable to provide proof of purchase of
   the product for verification, or
   e) The serial number of the product is missing or has been
   tampered with.

6. No one is authorised to assume any liability on behalf
   of TEAC or impose any obligation on it, in connection with
   the sale of any equipment other than as stated in this
   warranty and outlined
   above.

7. TEAC and/or its Authorised Service Centres reserve
   the right to inspect and verify whether the
   product is exhibiting a major failure as claimed by
   customers/retailers.

TEAC Warranty Service Hotline
1300 553 315

Call us between Monday to Friday – 8.30AM to 5PM
AEST
*Please have your purchase receipt and the product’s
serial number ready
For other enquiries and support please visit
www.teac.com.au

Read More About This Manual & Download PDF:

TEAC True Wireless Earbuds with Wireless Charging TWSMJV6 User Manual – Optimized PDF
TEAC True Wireless Earbuds with Wireless Charging TWSMJV6 User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>