Walker Edison B48CLY Bench Assembly Instruction Manual
- June 8, 2024
- WE
Table of Contents
Item # : B48CLY
Assembly Instructions
Walker Edison®
Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com
Revised 10/07/2019 (E)
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.1
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting
dowels, locate the appropriate hole for the dowel, place a small amount of
glue in the hole and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together, place a small amount of glue on the end of the dowel before attaching parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
VIII. Drill may be needed for securing product to wall.
Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.2
Parts List
3 
3 
10 2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.3
Hardware List
A Ø8x30mm Wooden dowel 4 pcs
B Ø15x11mm Cam lock 4 pcs
C Ø6x35mm Cam bolt 4 pcs
D Ø30mm Sticker 4 pcs
E M 4 Hex Key 1 pc
F Ø6x12mm Bolt 2 pcs
G Ø6x25mm Bolt 12 pcs
J Shelf support pin 4 pcs
K Ø4x38mm Screw 2 pcs
L Plastic wedge 3 pcs
M Ø3x17mm Screw 3 pcs
N Glue tube 1 pc
Philips head screwdriver required for assembly (not included)
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.4
Step 1
Using cam bolt (C) secure part (1) with Philips head screwdriver as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.5
Step 2
Insert wooden dowel (A) into parts (6,8) and screw cam bolt (C) into designated hole on the side panel as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.6
Step 3
Using bolt (G) secure parts (4,5) into parts (2,3,10 ) with hex key (E) as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.7
Step 4
Attach and align the bottom panel (8) to side panel (6) using cam lock (B).
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.8
Step 5
Using screw (K) secure part (5) into part (8) with Philips head screwdriver as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.9
Step 6
Put part (9) into parts (5,6,8) as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.10
Step 7
Position the Top Panel (1) onto the inserted Wooden Dowels and fasten it in place with Cam Lock (B) and Bolts (F, G) as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.11
Step 8
Using screw (M) secure plastic wedge (L) with Philips head screwdriver as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.12
Step 9
Place sticker (D) cover the holes as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.13
Step 10
Put shelf support pin (J) into parts (5,6) ,then put part (7) into cabinet as per diagram.
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.14
Step 11
Final Assembly
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.15
Walker Edison B48CLY Bench Assembly Instruction Manual – Download
[optimized]
Walker Edison B48CLY Bench Assembly Instruction Manual –
Download