WE LOCK PBOOOKEY24 Keyless Entry Door Lock User Guide
- June 6, 2024
- WE LOCK
Table of Contents
WE LOCK PBOOOKEY24 Keyless Entry Door Lock
Overview
Applicable size
-
Measure to confirm that the hole in the door is 2-1/8″(2.12in)
-
Measure to confirm that backset is either 2-3/8″ or 2-3/4″(2.36 or 2.76 in)
-
Measure to confirm that the hole in the door edge is 1 “(0.98in)
-
Measure to confirm that the door is 1-3/8″ to 2″(1.38in to 1.97 in)
Product Introduction
Accessories list
Lock core sleeve
|
Gusset
|
Stickers (Used to cover the door hole)
|
Keyx2
---|---|---|---
Fixing screw
|
Allen Key *1
|
Battery installation assistance tool
|
Manual
Installation diagram/video
Picture of installation Inward opening door : The bevel of the bolt face outwards when installing
-
The length of the lock body can be adjusted according to the diameter of the keyhole
-
Install the lock body and tighten the screws
-
Install outdoor lock
-
Pull out the indoor lock handle
-
Installation drawing of lock sleeve
-
Install indoor lock handle
-
Tighten the screws
-
Tighten the screw on the rear handle
Passcode settings: introduction
A. Add Ad min passcode: Modify Ad min passcode
-
1Add Ad min passcode:
Totally you can set 10 passcodes including 1 Ad min passcode and 9 user passcodes. Passcode length is 6 to 12 digits -
First step: The default master code modification, (as the same as the Ad min passcode modification)The default Ad min passcode is 123456:
➀ Press to wake up the keyboard
➁ Press +123456+ The keyboard lights up;
➂ Enter new passcode + +new passcode+ , modify successfully. -
Modify Ad min passcode
Press any key to wake up the keyboard, enter ‘ + Admin passcode + + 4″ The keyboard lights up. enter ‘new passcode+ +new pass code+ “
B. Add user passcode(Up to 9 user passcodes)
Press any key to wake up the keyboard, enter ” +Admin passcode+ +1 “,The
keyboard lights up. enter “new user passcode+ +new user passcode + “.
C. Delete user passcode
Press any key to wake up the keyboard, enter “ +Admin passcode+ +2″,The
keyboard lights up. enter ‘new user passcode + “.
D. Scramble code
Enter any number before or after a correct password, less than 30 digits in
total is ok.
Passcode Settings
Other settings
A. the default auto lock time modification
Press any key to wake up the keyboard, enter” +Admin passcode + + 5″ The
keyboard lights up, enter number 0-9.(The time about auto lock is the number
you entering plus 5, e.g. If you want to set 10 seconds, you need to enter 5.)
B. Vacation mode
Press any key to wake up the keyboard, Enter” passcode+ “, after unlocking.
press any key to wake up the keyboard. enter “passcode + ” .Vacation mode on:
The lock is always unlocking Vacation mode off: Press any key to wake up the
keyboard. enter “passcode+ “.
C. Silent mode
- The factory setting is to turn off Silent mode
- Silent mode on/off:” Press any key to wake up the keyboard, +Admin passcode+ + 0″,The keyboard flashed blue lights.
Silent mode: Key tone and prompt tone will be blocked when you enter password. (PS: The lock will ring when the battery is low or enter the setup menu)
Other settings : Flow Chart
Other settings: Restore Factory Defaults
A. Press any key to wake up the keyboard, enter “ +Admin passcode+ +3′,
the keyboard lights up and then press ,factory default setting reset
successfully
B. When the lock restores factory setting, vacation mode is on and if you
want to turn off the vacation mode, you need to enter ‘123456″
the default master code | 123456 |
---|---|
Silent mode | off |
The lock time | 8 seconds |
Specifications
Brand | WE.LOCK |
---|---|
Applicable door types | interior door, wooden door |
Adjustable range | 1 3/8″ to 1 15/16″(35-50) |
Operating Temperature | – 25°C- 60°C |
Pressing Cycle Times | 100,000 Times |
Material of handle | Zinc Alloy |
Way to unlock | Passcode/ Mechanical key |
Battery Type | *4AAA** Battery |
Power input | 4V-6V |
Battery Replacement | Replaceable |
Color | Silver |
Battery Life | > 1 year |
Operating instruction
Unlock and lock
Unlock the door from outside
Unlock the door from inside(Turn the handle toward the door hinge to unlock)
FAQ
- How often is the battery need be changed?
After the low battery alarm occurs, the battery needs to be replaced in time
- When will the low battery alarm?
The battery power is less than 20%.
- How to enter scramble PIN code?
Enter any number before or after the correct passcode, and then the lock will be unlocked. Scramble PIN code is less than 30 digits in total.
- How to unlock when the battery runs out?
You can use power bank to connect the lock via usb cable to charge and unlock the door.
• How to contact customer service?
Please contact this email: Service@WelockGlobal.com
Scan the QR code to view the installation video
Documents / Resources
| WE
LOCK PBOOOKEY24 Keyless Entry Door
Lock
[pdf] User Guide
PBOOOKEY24, Keyless Entry Door Lock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>