INSIGNIA NS-PS10CC/ NS-PS10CC-C Crosscut Paper Shredder Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
Crosscut Paper Shredder
(NS-PS10CC / NS-PS10CC-C)
Power switch
LEDS
SETTING UP THE SHREDDER
-
Place the shredder head securely on the rim of the supplied wastebasket.
Caution: Your shredder has very sharp, exposed blades on the underside. Use care when mounting the shredder to the wastebasket.
Note: Do not use bags to line the wastebasket.
-
Connect the power cord to a power outlet.
-
Slide the power switch from off to auto.
USING THE SHREDDER
Warning: Always turn off the shredder when it is not in use.
Caution: Do not insert more than 10 sheets of paper, one credit card, or
one disc at a time. You may damage the shredder.
To shred paper:
Insert paper into the paper or disc slot. When the paper has passed through,
the shredder will stop.
Caution: Always feed paper in as straight as possible to avoid paper
jams.
To shred discs and credit cards:
Hold the disc or credit card by the edge and feed into the paper or disc slot
one at a time, releasing when shredding begins. The shredder stops when the
entire disc or credit card has been destroyed.
Caution: Do not hold the disc with your finger through the center hole
while feeding it into the shredder. Serious injury may occur. Never feed more
than one disc or credit card at a time.
Notes:
- Never shred plastic (except credit cards, CDs, or DVDs), continuous forms, anything with adhesive including labels and envelopes, newsprint, or any hard materials.
- While this shredder will shred staples and small paperclips, it is recommended that you remove them whenever possible to extend the life of your shredder.
TROUBLESHOOTING
MAINTAINING
Once a month, drizzle vegetable oil or cooking oil (nothing petroleum based) on a few pieces of paper and feed them through the shredder.
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
- RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact with flammable chemicals (for example, nail polish, acetone, gasoline) in the wastebasket.
- Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it, moving it, or emptying the wastebasket.
- Never place the shredder near water or any heat source.
- Never use any petroleum based or flammable oils or lubricants in or around the machine as some oils can combust causing serious injury.
- Never spray any aerosol based products in or around shredder.
- Never shred envelopes, labels, or anything with glue or any sticky substance as this will lead to paper jams.
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades and electricity and will void the manufacturer’s warranty.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into the shredder and cause jams.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN
55423 U.S.A.
©2016 Best Buy. All rights reserved. Made in China
INSIGNIA NS-PS10CC/ NS-PS10CC-C Crosscut Paper Shredder Quick Setup Guide – Download