INSIGNIA NS-PCSSDM7/ NS-PCSSDM7-C SSD Mount Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
QUICK SETUP GUIDE
SSD Mount NS-PCSSDM7 / NS-PCSSDM7-C
Before using your new product, please read these instructions to prevent any damage.
The NS-PCSSDM7 / NS-PCSSDM7-C SSD mounting bracket lets you install an SSD drive into a 3.5-inch drive bay in a desktop PC.
PACKAGE CONTENTS
- SSD drive bracket
- Screws (8)
- Quick Setup Guide
YOU’LL NEED
- Phillips screwdriver
INSTALLING THE SSD DRIVE IN THE DRIVE BRACKET
Note: We recommend that you use an anti-static bracelet to protect the data on the SSD drive.
- Place your mounting bracket on a flat surface with the sides facing up.
- Place the SSD drive (not included) on your bracket. Make sure that the screw holes on the bottom of the SSD drive align with the holes on the bottom of your bracket.
- Carefully turn the bracket and drive over.
- Insert four screws through the holes on the bottom of your bracket and into the holes in the drive, then use a Phillips screwdriver to tighten the screws.
The SSD drive is ready to install into a PC. See the documentation that came with your PC for information about installing hard drives.
Note: Use the extra screws to secure the sides of your bracket to the PC drive bay.
SPECIFICATIONS
Dimensions (L × W × H): 3.9 × 4.0 × 0.46 in.
(100 × 101.5 × 11.6 mm)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call
1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in Taiwan
INSIGNIA NS-PCSSDM7/ NS-PCSSDM7-C SSD Mount Quick Setup Guide – Download