INSIGNIA NS-PCHDEDS19 Dual Hard Drive Docking Station Quick Setup Guide

: June 8, 2024
: Insignia

Table of Contents

Dual Hard Drive Docking Station
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUICK SETUP GUIDE

Dual Hard Drive Docking Station

NS-PCHDEDS19

PACKAGE CONTENTS

Dual Hard Drive Docking Station
Power adapter (12V/3A)
USB 3.0 cable（ USB 3.0 Type B to USB 3.0 Type A）
Quick Setup Guide
Note: The USB 3.0 OUT port cannot be used to connect a computer.

SYSTEM REQUIREMENTS

Windows OS:
Windows® 10, Windows® 8.1, Windows® 8, Windows®7
Linux Kernal:
Linux 2.4.1 and later versions
Mac OS:
Mac OS X 10.6 and later versions

FEATURES

Fashionable design provides remarkable performance
Supports all 2.5″ & 3.5″ SATA I/II/III hard drives
Maximum capacity of each bay is up to 8 TB
Plug and play, no drivers needed
Supports SATA and USB 3.0 transfer speed up to 5 Gbps
LED indicator lets you check working status
Supports MTT (Multiple Transaction Translator)
Reads two discs (SSD and HDD) simultaneously.

Front view

Front View

Back panel view

HARD DRIVE DOCKING STATION

Hard Disk

Insert an SSD or HDD into a slot on your docking station. You can use both slots at the same time.
CAUTION: To avoid damaging the equipment, make sure that the SSD/HDD is inserted in the correct direction.
Connect the USB cable to the USB 3.0 IN jack on the docking station and to an available USB port on your computer.
Connect the power adapter to the DC IN jack on the back of your docking station, then turn on your docking station and the computer. The docking station LED blinks until the computer identifies your station, then the LED lights steady.
If this is the first time you are using an SSD or HDD, follow your computer’s operating system instructions to format the disk.
Follow your computer’s operating system instructions to transfer data to or from your computer. The docking station LED blinks while data is transferring.
When the transfer is complete, turn off power to the docking station by pressing the power switch. Press the eject button on the side of your docking station, then remove the SSD or HDD.

USB Devices

You can use the USB 3.0 OUT port to connect USB devices. This jack provides two-way transmission between the USB device and an HDD, an SSD, or a computer.

SPECIFICATION

LEGAL NOTICES

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ICES-003

This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA

For customer service, call 877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.

Made in China

INSIGNIA NS-PCHDEDS19 Dual Hard Drive Docking Station Quick Setup Guide – Download