INSIGNIA NS-HZ313/ NS-HZ313-C Optical/ Coaxial Digital to Analog Converter Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
PACKAGE CONTENTS
- Optical/Coaxial Digital Audio-to-Analog Audio Converter
- Power adapter
- RCA stereo audio cable
- Quick Setup Guide
FEATURES
-
Converts digital audio to analog audio signals
-
Optical or Coaxial Digital input selectable
-
Perfect for connecting audio devices that only have digital audio
outputs to devices that only have analog audio inputs -
PCM stereo support
SETTING UP YOUR CONVERTER
Note: Before you install this device, turn off the audio and video devices
that
you are connecting.
If your digital audio source device, such as a TV, Blu-Ray player, or
media streaming device, has both Optical and Coaxial digital
connections, select the connection you prefer. If your source device
only has one, use that connection. Go to the Optical connection or
Coaxial connection section below, depending on the connection you
chose.
Optical connection
-
Slide the input switch on the side of the converter to OPTICAL.
-
Connect a digital optical cable (not included) to the OPTICAL IN
port on the converter, then connect it to the Optical Out port on
your audio source device, such as your TV, Blu-ray player, or media
streaming device.
Caution: Digital optical cables are fragile. DO NOT BEND THE CABLE. -
Connect the included RCA stereo audio cable to the AUDIO OUT
(R and L) jacks on the converter, then connect it to the Audio In
(R and L) jacks on your stereo, soundbar, headphones or other audio
playback device. -
Connect the power cable to the DC
jack on the converter, then plug the
power adapter into a wall outlet.
-
Turn on the connected devices and begin playback. If you are unable
to hear the audio from your speakers or headphones, check the
connections and settings to make sure that they are all correct. -
Change the audio source device’s (e.g. TV, Blu-ray player, or media
streaming device) audio output to “PCM” format. Refer to the manual
you received with the audio source device for additional information.
Coaxial connection
-
Slide the input switch on the side of the converter to COAXIAL.
-
Connect a coaxial digital cable (not included) to the COAXIAL IN port on
the converter, then connect it to the Digital Out port on your audio
source device, such as your TV, Blu-ray player, or media streaming device. -
Connect the included RCA stereo audio cable to the AUDIO OUT
(R and L) jacks on the converter, then connect it to the Audio In
(R and L) jacks on your stereo, soundbar, headphones or other audio
playback device. -
Connect the power cable to the DC jack on the converter, then plug
the power adapter into a wall outlet. -
Turn on the connected devices and begin playback. If you are unable
to hear the audio from your speakers or headphones, check the
connections and settings to make sure that they are all correct. -
Change the audio source device’s
(e.g. TV, Blu-ray player, or media
streaming device) audio output to
“PCM” format. Refer to the manual
you received with the audio source
device for additional information.
SPECIFICATIONS
Dimensions (H × W × D): 2.7 × 2 × .9 in. (6.9 × 5 × 2.3 cm)
Digital audio format support: LPCM 44 kHz, 48 kHz, 96 kHz
Power: 5 V DC, 600 mA
IMPORTANT SAFETY INFORMATION
- Indoor use only.
- There are no user serviceable parts. Do not open the housing.
- Do not use in a high humidity environment.
- Use the attached AC/DC adapter only.
TROUBLESHOOTING
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Read More About This Manual & Download PDF:
INSIGNIA NS-HZ313/ NS-HZ313-C Optical/ Coaxial Digital to Analog Converter Quick Setup Guide – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>