Aladdin FABRIC-LITE 20 Full Kit Mount, Kit Case and Frame User Manual
- June 3, 2024
- ALADDiN
Table of Contents
Aladdin FABRIC-LITE 20 Full Kit Mount, Kit Case and Frame
START-UP GUIDE
| 1 | Metal ring for mounting (can be attached to magnets) |
|---|---|
| 2 | Velcro |
| 3 | Connector plug |
Unpack your panel and accessories from the kit. Plug in the panel connetor to your dimmer-unit. Use the extansion in between if needed. IPlug in your dimmer-unit to a power outlet. Instead of using the power outlet, there’s an integrated V-Mount or Gold-Mount plate on top of the dimmer. You can use batteries from 12-30V DC. Just note that you need batteries which can handle the power draw of 200 watts from the panel. There’s a simple calculation for that:
- POWER DRAW (W) = MIN. WORKING CURRENT (A) =
- BATTERY VOLTAGE (V) 200 (W) = 13.5 (A)
- 14.8 (V)
If you are using 14.8V batteries you need at least a working current of 13.5A.
If your battery is rated at 14.8V and 200Wh/13.5Ah with a working current of
13.5A you can run your FABRIC-LITE 20 for one hour.
For any further questions about using our products please refer to our
customer service or watch the instructional videos on www.aladdin-
lights.com or YouTube.
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (applies also for storing in a car).
- Do not use the dimmer wire or extension wire to hang or mount the panel.
- Do not bend or fold the panel more than 90 degrees.
- Do not tape directly on the LEDs of the panel – they can burn out.
- Do not damage the product with improper force or cause any impact with heavy objects.
- Do not cut the panel with sharp objects.
- Keep out of reach of children.
- The panel will heat up when running a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the frame to assure enough air flow for heatreduction.
- Use the product only within the temperature range of -10°C – +40°C.
- Make sure the panel has cooled down before storing it in the pouch or any other case.
- When you have technical problems while using the product, stop using it immediately and contact your dealer / reseller.
WARRANTY
We provide a one year warranty period after the purchase. This warranty covers repairs or a replacement for faulty products within this period. After this warranty has been expired, you can still get repairs for your product which will be charged extra. Aladdin Lights reserves the right to refuse warranty service on products under disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors
SELECTED OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
| Light source | 200W Bi-Color LEDs |
|---|---|
| CRI | Ra 98 |
| TLCI | 98 |
| Color temperature | 2850K – 6098K |
| Beam angle | 140° |
| Dimmer | Dimming: (0.5%–100%) |
| Cooling | Passive cooling |
| Dimmer input | 12V to 30VDC |
Power unit input
| ****
Automatic voltage 100V to 240VAC
Power consumption| 200W
Dimensions| 220mm (W) x 115mm (H) x 65mm (D)
Weight| 930g
Connection| Connector plug
Temperature range| -10°C – +40°C
DMX512 support| With dimmer unit (in/out)
DMX512| 2 Channels – White Bi-Color
Material| Fabric
IP-Rating| 32
www.aladdin-lights.com
PICTURE BY ALAVEZ BURGUETE DESIGN
Documents / Resources
|
Aladdin FABRIC-LITE 20 Full Kit Mount, Kit Case and
Frame
[pdf] User Manual
FABRIC-LITE 20 Full Kit Mount Kit Case and Frame, FABRIC-LITE 20, Full Kit
Mount Kit Case and Frame, Mount Kit Case and Frame, Case and Frame
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>