denver RLT-1001 10 Inch LED Ring Light with 160cm Tripod Stand Instruction Manual

RLT-1001 10 Inch LED Ring Light with 160cm Tripod Stand
Instruction Manual

Safety information

Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

1. The product is not a toy. Keep product out of the reach of children and pets to avoid chewing and swallowing.
2. Product operating and storage temperature is from 0 degrees Celsius to 40 degrees Celsius. Environments under and above this temperature might affect functionality.
3. Never open the product. Do not touch the inside electronics, or you may get an electric shock. Repair or service are only to be performed by qualified personnel.
4. Do not expose to heat, water, moisture, direct sunlight!
5. The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop using it immediately.
6. Do not look directly into the LED light as this can damage your eyes.

Product Specifications

10-Inch Ring Light

• Color: Black
• Power Supply: USB Interface
• Material: ABS + PC
• Number of LEDs: 120
• Ring Size: Diameter 10 Inch/26 cm
• Color Temperature: 3000 – 6500K

Special Note:

1. The ring light is not rechargeable. You need to connect to a power supply via USB cable before using it.
2. Please do not place this product in a bathroom or other humid environment to avoid short-circuit.
3. Please do not place this product in an environment where flammable liquid is likely to come into contact with this product.

In the Box

• 1 x LED Ring Light with USB Cable
• 1 x Stretchable Universal Phone Clip (Optional)
• 1 x 360° Ball Joint
• 1 x Installation Manual

Installation

Step 1: The ball joint is connected to the LED ring light by ¼” thread.
Step 2: Connect the phone clip to the ring light through ¼” standard thread.

3.1 USB Power Supply

USB power supply works with various USB ports on Laptop, PC, power bank, USB charger, etc.

3.2 & 3.3 Light Modes & Brightness

1. The LED ring light has 3 light modes (Cool, Soft, Warm), and can be adjusted to 10 different brightness levels.
   Connect the USB cable to a USB power source (not included) and press the ON/OFF button to turn it on.
   Press again to turn it off. The brightness level is adjusted by pressing the “+” and “-“ buttons.

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S

Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu

References

• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>