imperii Electronics Intelligent Body Temperature Tracker Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii Electronics Intelligent Body Temperature Tracker Instruction Manual
Product Figure
FRONT SIDE
REVERSE SIDE
Feature Introduction
-
Ultra Long Standby
Battery life of up to 120 days x 24 hours, no need to replace the battery. -
Ultra Low Power Consumption
Top RF device, signal stability, strength is less than 1/10000 of mobile phone radiation. -
High Sensitivity, High Accuracy
Wear 30 seconds to reflect the change of body temperature. 36.00°C-41.00°c, ±0.os•c accuracy. -
Intelligent Alarm
The preset temperature, low temperature alarm. -
Ultra Bluetooth Link Distance
Clever design, completely solve the problem of occlusion body signal, support 12m distance for Bluetooth linking. -
Round-the-clock Monitoring
Real time, accurate tracking of a baby’s temperature. -
Cloud Remote Monitoring
Log on to the Internet through the mobile phone, remote monitoring of real- time temperature changes. -
Historical Records
7 days’ records for local memory, and 6 years’ records for cloud memory. Temperature details provide accurate information, traceability. -
Children Anti-loss Model
Activate the Children Anti-lost mode, mobile will report and alarm, when children go far away more than 10 meters with parents. -
Waterproof
It can be immersed by medical alcohol for disinfection for 2 minutes. -
Low Battery Warning I Cloud Storage Backup/Data Sharing I Bluetooth 4.0
Usage Scenario
Scenario A: Real-time monitoring of temperature in infants
To monitor the infant body temperature, it can be sticked to the object
armpits, chest, forehead and other parts, close to the body.
The equipment will be real-time monitoring of temperature. Once the infant
febrile, the body temperature tracker will promptly alarm, through the mobile
phone software, to remind the guardian to care it, in case to avoid the infant
long time high fever, even febrile convulsion.
Normal Body Temperature (for reference only)
AGE|
/ oC
|
/ oF
2
|
34.7-37.2
|
94.5-99.1
3-10
|
35.9-36.7
|
96.5-98.0
11-65
|
35.2-36.9
|
95.3-98.4
65
|
35.6-363
|
96.0-97.4
The normal temperature can vary by:
Age/Person/Time of day (often higher in the evening).
Where on the body the temperature was taken, body temperature can be raised
by:
Activo / Being active/ Eating/ Feeling strong emotions/ Menstruating (in
women) /Taking certain medicines/ Being In a high temperature or high humidity
/Teething (in a young child – but no highier than 37.8 °C) I Wearing heavy
clothing.
Scenario B: Real-time monitoring of infants warm temperature, avoid cold
To monitor the infant warm temperature, it can be pasted to the object’s
underwear, corresponding to the part of chest, belly button, and other parts
The equipment will be real-time monitoring of infant’s ambient temperature
(the temperature of infant underwear), Once the temperature is too low, it
will promptly alarm, through the mobile phone software, to remind the guardian
nursing infants, and avoid cold to result have a fever.
Infant Normal Warm Temperature {for reference only)
It is most suitable that the gap, between the infant body and underwear,
should be kept the temperature between 300C-34°C. It can prevent the body to
maintain body temperature
User Guide
EASY TO START
a) Install battery (installed in initial).
b) Scan the QR code to get APP URL Then choose the Android or iOS version to
install.
c) Open body temperature tracker and run the APP. APP will activate Bluetooth
and build link with body temperature tracker automatically.
d) Wearing.
ACCESORIOS
A CR1632 Battery (Has been installed)/ Baby Medical slicker*S / User manual / Guarantee card
TECHNICAL SPECIFICATION
Model
|
IOT-pods-BT15-I
---|---
Size
|
DIA: 31.5mm; Thickness=5.6mm
Weight
|
6g (with Battery)
Battery Model
|
CR1632
Temperature Unit
|
oC or oF (Optional)
Accuracy
|
±0.05oC (36.00-41.00oC)/±0.1oC (25.0-35.9oC & 41.0-45.0oC)
Measurement range
|
25o-45o
Receiver
|
- Android 4.2/iOS 6.0 and over
- Bluetooth 4.0
Mac Linking Distance
|
12m
Batter Work Time
|
120 days/24 hours per day (on monitoring state)
FUNCTION DESCRIPTION
a) Body Temperature Monitor:
The device measures temperature and sends it to receiver via Bluetooth Then
you can get real time temperature on receiver.
b) Temperature Beyond Limits Alert:
The temperature number turns to red and there is a sound notification on
receiver when temperature beyond limits. Sound notification can be configured.
And the temperature limits can be manually settled.
c) Bluetooth Disconnect Indication:
Device will active alarm and sound notification, when the bluetooth
disconnect.
d) Temperature data storage:
The device will store working data automatically, if the bluetooth linking
turn down during monitoring body temperature. The stored data in the device
will be sent to receiver when the connection is rebuilt, and upload 24 hours’
data.
e) Low Voltage Indication:
There is an indication on receiver when the battery voltage is less than 2.7V.
f) Battery Replace:
Press the cover and rotate two sides as shown in the figure, it can be opened.
Then, replace the battery.
OPERATION GUIDE
a) Key actions
• Long press power key more than 2s: power on.
• Long press power key more than 2s (on the working state): Power off.
b) The first time connection with mobile
Long press (more than 2s)-> Run APP on the mobile-> APP will Build connection
within body temperature tracker on the mobile automatically -> Wear the body
temperature tracker.
c) Rebuild the Bluetooth connection
Run APP on the mobile-> Bluetooth connection will rebuild automatically.
d) Measurement and data storage
On line state: The device will send all data to mobile. If the
Cloud Storage function is running on the mobile, data will be sent to cloud
and saved with MAX 6 years storage capacity; unless data will be saved on the
mobile temporarily.
Off line state: Data will be saved on the device with MAX 24 hours’
storage capacity. When the Bluetooth connection is rebuild, all data will be
sent to mobile automatically. {If the temperature is keeping abnormal body
temperature more than 5 minutes, the device will power off automatically).
e) LED Indicator
Continuous blink: power on (2 times) I power off (3 times).
Single blink: on the disconnecting state (blink 1 time in 1 sec, then
turn to slow).
***** No blink: on the working state with connection.
TIPS
- Please use the medical sticker fixed body temperature tracker. Please stop using it immediately and replace other sticker as doctor’s advice, if you feel unwell {uncomfortable or allergic} for the sticker.
- Recommend clean the device by 75% concentrated medical alcohol before and after usage.
- Recommend clean the skin by medicinal alcohol, after taking off the device also.
- Recommend mobile with Bluetooth 4.0.
NOTICE
- Warning: Keep out of reach of baby. Do not play for baby, forbid to devour: axillary temperature monitoring must be in more than two years of age.
- Do not put into the fire, avoid the use of common combustible equipment.
- Equipment detection results suggests as a subsidiary data for reference.
- The subjects of some behavior may lead to inaccurate data;
- The temperature monitoring feature of the device is primarily applicable to children muscle and fat affect wireless transmission, so the transmission range would be weaken when adult or obese child use the device;
- Please pay attention to the operation temperature and humidity using the device in a condition that does not satisfy the requirements may lead;
- Equipment for non-sterile, please clean with 75% concentration of medical alcohol use before; after use, please use 75% concentration of medical alcohol sterilized skin contact.
- Please abide by local laws and regulations when using.
SCOPE
The device is reusable and intended for temperature measurement of adult and pediatric {ages two years and over); it can be used In hospital and at home: Not used in ICU and other emergency condition.
DISCLAIMER
a) The manual is written in accordance with available information and the
contents are subject to change without notice. We have tried our best effort
to guarantee its content accurately reliable for the manual. However, the
company does not assume the liability of the loss and damage, which caused by
the omission or inaccuracies in this manual.
b) Software standard shall be prevailed, when any upgrade be implemented. When
product improves or technology changes, please get more related information
from the product website.
c) Other trademarks involved possibly belong to their possessor.
STATEMENT
- This equipment has been tested, comply with the limits for a class B digital device, according to the rules of FCC 1 S parts, aims to provide protection to a residential reasonable installation, to prevent harmful interference. This equipment generates uses and can radiate radio frequency energy.
- Electromagnetic compatibility standard IEC60601-1/ -2 products.
- Contact with the skin, non-toxic, non-irritating, reached the standard of 15010993-1/ -5 /-10.
imperii Electronics Intelligent Body Temperature Tracker Instruction Manual –
Download [optimized]
imperii Electronics Intelligent Body Temperature Tracker Instruction Manual –
Download
imperii Electronics Intelligent Body Temperature Tracker Instruction Manual –
OCR PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>