imperii Fast Wireless Charger Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii Fast Wireless Charger Instruction Manual
User Manual
Thanks gor choosing us!
This is a wireless charger of smart phone that allows you enjoy the fun of
digital products easily.
Please read the manual carefully before using the product, and keep properly
for checking
Assembly mode
Please install the base before using the product. The install at as (1).
The base straight into the charging the card slot that according to the
direction of arrow finish as (2).
Connect to Power Adapter
- Plug the power adapter into the socket, connect the adapter with one end of the USB cable, and connect the charging board at one end.
- Electricity charging board blue and green lights after the double flash light, charging plate into standby.
Connect Laptop to Charging
2: LED Indicator Light
- One end of the USB power cord is connected with the notebook USB interface, and the other end is connected with the charging board.
- Electricity charging board blue and green lights after the double flash light, charging plate into standby.
Connect Desktop to Charging
LED indicator Light
- Plug the power adapter into the socket, connect the adapter with one end of the USB cable, and connect the charging board at one end.
- Electricity charging board blue and green lights after the double flash light, charging plate into standby.
Mobile phone charging right way
-
Electricity charging board blue and green lights after the double flash light, charging plate into standby.
-
The mobile phone with wireless charging function is arranged on the charging board, and the LED indicator light is displayed. For the blue long light, at this time for the state of charge, the phone is full electricity after the LED indicator light Show green.
Note: Only Samsung mobile phone conform to the full recharge feedback now, feedback as the above another mobile phone will not notice after full recharge.
Specification
Input: 5.OV/2.0; 9.OV/1 .BA
Frequency: 110-205KHz
Size: 100 x 115mm
Receiving distance: 4-10mm
Conversion: >72%
NW: 96g
Notes
- Do not squeeze or collide.
- Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
- Do at use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and pccurs leakage phenomenon.
- Do not close with magnetic stripe or chip card (ID card, bank cards, etc.) to avoid magnetic failure.
- Please keep the distance at least 20 cm between implantable medical devices (pacemakers implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- Take care of the children, to ensure that won’t play the wireless charger a toy, to avoid unnecessary accidents.
The involved images are sketch maps, the final product a per the material subjects.
- No power adapter, if you need, please purchase separately.
imperii Fast Wireless Charger Instruction Manual – Download
[optimized]
imperii Fast Wireless Charger Instruction Manual –
Download
imperii Fast Wireless Charger Instruction Manual – OCR PDF