Shada 300817 40W Work Light for Power Tool Batteries Adapter Instruction Manual
- June 3, 2024
- SHADA
Table of Contents
Shada 300817 40W Work Light for Power Tool Batteries Adapter
PARTS INCLUDED
INSTALLATION INSTRUCTIONS
Safety warning
Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram [(when applicable]. Keep this document for future reference and only use the product as described In this document. The other use of the product than described in this manual may damage the product Or cause to the user [eg. due to 3 short circuits, fire, or electric shocks]. Disconnect the product from the power source if problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or detective. Replace a damaged defective product immediately. When a non-standard consumer [power installation is required this should be performed by a qualified technician to reduce the risk of an electric shock. Make sure the product is sufficiently ventilated during use. lever covers an electrical (LEDJ deVICe During usage since t can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so0 don’t stare at it directly, When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual Keep the product out of reech of children or animals.
Cleaning and Maintenance warning
Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly, replace it. Clean the outside of the device using a soft, damp cloth (don’t use a microfiber cloth).
Support
If you need further help or have comments or suggestions please visit www.sheda.nl/nl/contact