SHADA 2400391, 2400392, 2400293 LED’s light Pro Instruction Manual

SHADA 2400391, 2400392, 2400293 LED’s light Pro

Specification

WARNING

• Risk of fire or electric shock. The electrical rating of these products are 100-277 Vac, the installer must determine whether they have 100-270 Vat the luminaire before installation
• Risk of fire or electric shock. LED Commercial High Bay installation requires knowledge of luminaires electrical systems.
• If not qualified,do not attempt installation. Contact a qualified electrician.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Disconnect power before installing the product or servicing it.
  Wait until fixture has cooled down before installing or servicing the fixture.

INSTALLATION

Remove (3) protruding screws on LED High Bay. Place reflector ring within plastic reflector. Align holes on ring and plastic reflector with fixture and fasten screws back into fixture.

BOX CONTENTS

• 1- led highbay
• 1- ring
• 1 – Reflector

Installing LED High Bay

1. Install the hook onto the top hole and rotate it to the end
2. Fasten the screw nut tightly with wrench
3. Fasten the security screw
4. Hook the product onto the designated location and fasten the security screw tightly.
5. make all wiring connections.
   Cap off dimming wires if not used.

Manual identification
Shada B.V. The Netherlands Molenmakershoek 28 NL-7328 JK APELDOORN www.shada.nl
Article number: 2400391, 2400392. 2400393.

Operation

• General
  This product is designed for professional use.

• Modification of the product
  The product may not be changed or adapted.

• Conformity of the product with legislation
  The warranty expires in the event of damage due to non-compliance with the safety in­structions of the device. Furthermore, we are not liable for consequential damage, damage to objects or persons resulting from failure to observe the safety instructions and improper use/handling of the device due to wear and tear. Product design and specifications are sub­ject to change without notice. All logos and trade names are registered trademarks of their respective owners and are hereby acknowledged as such.

• Storage of the Manual
  Please read the operating instructions carefully and completely before use. The operating instructions are part of the product, they contain important information on the commission­ing and handling of the device. Keep all enclosed operating instructions for future reference. If the device is sold or passed on to third parties, you are obliged to pass on the operating instructions as these are lawfully part of the product.

• Operating the product
  The safety instructions and warnings must be observed to ensure both the perfect condition of the product and safe operation.

• Instructions for disposal
  Old appliances marked with the pictured symbol must not be disposed of with the trash. You must return them to a waste collection center (inquire at your local community) or the retailer where they were purchased. They will ensure environmentally sound disposal.

• Documentation
  The product has been manufactured and supplied in compliance with all relevant regulations and directives that apply for all member states of the European Union. The product complies with all applicable specifications and regulations in the country of purchase. Formal docu mentation is available upon request. The formal documentation includes, but is not limited to the declaration of conformity, the material safety datasheet and the product test report.\

• CE-Declaration
  This product complies with the following directives: LVD: 2014/35/EU EMC: 2014/30/EU RoHS: 2011/65/EU

• Explanation of symbols, concepts and particularities of the product
  Action icon – Read this manual carefully and completely.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>