Shada nl 2400558 LED High Bay Instruction Manual
- June 1, 2024
- Shada nl
Table of Contents
Shada nl 2400558 LED High Bay
Specifications
- Input Voltage: ~220-240V
- IP Rating: IP65
Tools Needed
- Screwdriver
- Pair of wirecutters
- This LED High Bay requires very few tools for installation.
- A screwdriver and a pair of wirecutters will help to install the junction box and high-bay fixture.
Installing LED High Bay
- Ensure the power source is turned off before starting the installation process.
- Use the screwdriver to install the junction box securely in the desired location.
- Connect the wires from the power source to the terminal block of the LED High Bay fixture.
- N (Blue) wire to N terminal
- L (Brown) wire to L terminal
- (Green/Yellow) wire to the respective terminal
- Securely mount the high-bay fixture onto the junction box.
- Turn on the power source and test the LED High Bay for proper functionality.
Caution
- Risk of fire or electric shock. The electrical rating of these products is 220-240 Vac, the installer must determine whether they have 220-240V at the luminaire before installation.
- Risk of fire or electric shock. LED Commercial High Bay installation requires knowledge of luminaire electrical systems.
- If not qualified, do not attempt installation. Contact a qualified electrician.
- To prevent wiring damage or abrasion, do not expose wiring to the edges of sheet metal or other sharp objects.
- Disconnect power before installing the product or servicing it.
- Wait until the fixture has cooled down before installing or servicing the fixture.
Read User Manual Online (PDF format)
Loading......