dji FPV Car Charger User Guide
- June 7, 2024
- DJi
Table of Contents
Car Charger User Guide
v1.0 2021.01
Disclaimer
Please read this entire document and all safe and lawful practices DJITM provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI. For up to date product information, visit http://www.dji.com and click on the product page for this product. This disclaimer is available in various languages. In the event of divergence among different versions, the English version shall prevail.
Introduction
The DJI FPV Car Charger is used to charge the Intelligent Flight Battery through a car power outlet. Boasting overheating protection, the car charger automatically stops charging if the car power outlet exceeds a certain temperature.
Usage
- Connect one end of the car charger to the car power outlet and the other end to the Intelligent Flight Battery. Alternatively, you can connect the other end to the Charging Hub to charge the Intelligent Flight Battery.
- The LED indicator on the car charger glows solid green when charging.
- When the LED lights on the Intelligent Flight Battery turn off to indicate charging is complete, disconnect the car charger from the car power outlet.
-
Place the car charger on a stable surface. DO NOT cover the car charger. Make sure that
there is sufficient heat dissipation. -
Only use the car charger when the engine is running. Otherwise, the battery of the vehicle may not have the required voltage for the engine to start.
-
The indicator light will glow solid red if the battery is charging abnormally. Disconnect the
charger from the car power outlet and the Intelligent Flight Battery. Wait five minutes before reconnecting again to charge. -
If the car charger becomes loose and is reconnected when charging, it may be necessary to unplug and plug the Intelligent Flight Battery to resume charging.
-
DO NOT touch the metal connector after it is unplugged.
Specifications
Model Operating Temperature Input Voltage DC Output Charge Time*
| Model | CCX170-86 |
|---|---|
| Operating Temperature |
5° to 40° C (41° to 104° F)
Input Voltage| 14.0 V
DC Output|
25.2 V 3.4 A or 25.2 V 0.8 A
Charge Time| approx. 50 min
- Charging times were tested in a lab environment and should be taken as reference only.
Please refer to http://www.dji.com/service for after-sales service for your product where applicable. DJI shall mean SZ DJI TECHNOLOGY CO., LTD. and/or its affiliated companies where applicable.
Compliance Information
FCC Compliance Notice
FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: DJI FPV CAR CHARGER
Model Number: CCX170-86
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
ISED Compliance
CAN ICES-003 (B)/NMB-003(B)
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this
device is in compliance with the essential requirements and other relevant
provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at
www.dji.com/eurocompliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances.
DJI Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>