JOHN LEWIS Trapeze Desk User Manual
- June 7, 2024
- John Lewis
Table of Contents
Trapeze Desk
J O H N L E W I S & PARTNERS
Trapeze Desk Stock number: 816 22402
816 22401
H76 W125 D65cm
Thank you for purchasing the Trapeze Desk. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have. The John Lewis Team
Tools required
Time to assemble 0.5 Hours
People to assemble
Improtant Safety Information
Warning
The product should only be used on firm, level ground.
Keep small part out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
✔Check the pack and make sure you have all the parts listed.
✔Check all screws or bolts are tighten and inspect regulary.
✔Make sure the legs remain in contact with the ground regularly.
Don’ts
✘Do not over tighten screws or bolt.
✘Do not stand on the product.
✘Do not use power tools to construct as over tightening and panel failure may
occur.
Your Desk
| Ref | Description | Dimensions | Qty |
|---|---|---|---|
| 1 | Side F「ame | 742mm x594mm x40mm | 2 |
| 2 | Glass | 1250mm x650mm x10mm | 1 |
| 3 | Shelf Board | 1180mm x484mm x18mm | 1 |
| 4 | Cross Bar | 962mm x40mm x24mm | 1 |
| 5 | Cross Bar | 812mm x40mm x4mm | 1 |
| 6 | Support Rail | 786mm x40mm x24mm | 1 |
Fixtures and fittings
Fixtures and fittings supplied (actual size)
| Ref | Description | Dimensions | Qty |
|---|---|---|---|
| A | Bolt | 6mm x30mm | 12 |
| B | Screw | 6mm x60mm | 6 |
| C | Felt Pad | 20mmx20mm x3mm | 4 |
| D | Allen key M4 | 1 |
Product Assembly
Trapeze Desk
816 22402
816 22401
Step 1
Parts, fitting and tools
1, C
Step 2
Part, fitting and tools
1 4 5 6 B D
Step 3
Part, fitting and tools
1 4 5 6 B D
Step 3
Part, fitting and tools
2 A D
Step 5 Final assembly
Part, fitting and tools
3 A D
Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut — for example, the’medullary ray’ which can appear on oak furniture is a mark of good quality timber — these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts by the way slivers are arranged. All timber and veneer surfaces will change color and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth. Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre. Spray polishes are best avoided as they contain silicone’s which may spoil the furniture’s surface when building up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under paper if you are writing. Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and re-tighten when necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Retain these instructions for future reference.
Your feedback is very important to us and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you.
John Lewis Partnership 171 Victoria Street London SW1E SNN johnlewis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>