bsi Mid Height Bridging Wall Unit Instruction Manual
- June 7, 2024
- bsi
Table of Contents
bsi Mid Height Bridging Wall Unit
600 and 900 Mid Height Bridging Wall Unit Assembly
Note: If fitting a “True Handle less” kitchen, some components will
differ to those shown in this instruction and will also be packaged
separately.
Please refer to your True Handle less guide to Receiving for further details
on the different components and difference in installation.
Components
Important Information
True Handleless Kitchens Installers
See Note Above
Caution: Some pieces of hardware could be hazardous to small children. Keep
all these items out of reach and do not leave children unattended in the
assembly area.
Please read these instructions carefully before proceeding. Refer to the Guide
to Receiving and Installing your Kitchen booklet for further information.
Note: Due to variation in wall conditions no screws are supplied for
fixing the units to the wall. If in doubt consult an expert. Assemble the unit
on a clean solid work surface.
In the interest of continuing improvements we reserve the right to amend or
adjust the specifications without prior notice. Errors and omissions excepted.
Every effort has been made to ensure that this product leaves the factory in
perfect condition. In the unlikely event that an item is damaged or incorrect,
please contact the customer services department.
Note – Fitting Handles: (1) Decide where you are going to position each handle to maintain symmetry around your kitchen. (2) Measure the handle centers and mark off each door/drawer position. (3) Drill through the door/drawer using a fine drill (<2.5mm), then drill back from the rear face using a 4.5mm drill. (4) Attach with the fixings provided with your handle.
| Ref. No. | Item | Quantity |
|---|---|---|
| 150101 | 4 | |
| 150126 |  | 4 | |
| 154082 |  | 8 | |
| 154085 | 8 | |
| 154004 |  | 8 | |
| 150308 | 2 | |
| 150309 | 2 | |
| 152148 |  | 2 | |
| 151101 | 4 | |
| 151999 | 2 | |
| 152181 |  | 2 | |
| 152162 | 2 |
LH – 152246
RH – 152247| 
| Pair
LH – 152248
RH – 152249| 
| Pair
152201| 
| 2
154016| Stay arm kit each containing:| 1/2
| 
| 1
| 
| 1
| 
| 1
| | 1
| | 5
Tools Required
| Drill |  |
|---|---|
| Medium Crosshead Screwdriver | 
Large Flathead Screwdriver| 
Spirit Level| 
G-Clamp (pair)| 
Hammer| 
Tape Measure| 
Bradawl| 
Assembly Instructions
Note: Instruction shows assembly for standard height unit. Construction is same for tall height units.
Installation Instructions
