bsi Built Under Oven Unit Instruction Manual

600 Built Under Oven Unit Assembly

TH Note: If fitting a “True Handleless” kitchen, some components will

differ to those shown in this instruction and will also be packaged separately. Please refer to your True Handleless guide to Receiving for further details on the different components and difference in installation.

Components

Note: Supports D not used if fitting drawer.

Important Information – True Handleless Kitchens Installers: See

Note Above TH

FM 665131

Caution: Some pieces of hardware could be hazardous to small children. Keep all these items out of reach and do not leave children unattended in the assembly area.

Please read these instructions carefully before proceeding. Refer to the Guide to Receiving and Installing your Kitchen booklet for further information.
Note: Due to variation in wall conditions no screws are supplied for fixing the units to the wall. If in doubt consult an expert. Assemble the unit on a clean solid work surface.
In the interest of continuing improvements we reserve the right to amend or adjust the specifications without prior notice. Errors and omissions excepted.
These units may be fitted with a drawer system. The drawers are supplied separately. These instructions show the runner positions for the drawer system.
Follow the instructions supplied with the drawers for drawerbox assembly.
Every effort has been made to ensure that this product leaves the factory in perfect condition. In the unlikely event that an item is damaged or incorrect, please contact the customer services department.

Note – Fitting Handles: (1) Decide where you are going to position each handle to maintain symmetry around your kitchen. (2) Measure the handle centres and mark off each door/drawer position. (3) Drill through the door/drawer using a fine drill (<2.5 mm), then drill back from the rear face using a 4.5 mm drill. (4) Attach with the fixings provided with your handle.

Ref. No.            Item                              Quantity

150101                3.5x12mm               4
150202                4x12mm               14
150201                      4x15mm     22

150124                4x25mm     8
154082                                10
154085                                              10

154004                         10
154068                                          6
154047                                   2
154014                                        2
154015                                         2
151999                                                  2
152401                                   4
152418                               4
152402                                 2
150308                                   2
150309                                            2

Tools Required

Drill                                                            G-Clamp (pair)

Medium Crosshead Screwdriver                 Hammer

Large Flathead Screwdriver                        Tape Measure

Spirit Level                                                  Bradawl

1 – 2 Assembly Instructions

TH Modification required at this stage, see True Handleless guide

for further details.

1.                 2.

154082              10                    154004             10

3 Without Drawer

Note: Left hand panel shown only, mirror for right hand panel.

Note: For ease of fitting, Step 17 can be completed at this point.

3.

150124                  8

4 With Drawer

Note: Left hand panel shown only, mirror for right hand panel.

Drawer Runner

                      1 x ‘L’; 1 x ‘R’

  x4

x2

Fit as third screw

4.

150202      4                154068          4

5.

5.

154085     10

6 – 7

TH Modification required at this stage, see True Handleless guide for

further details.

Do Not Over Tighten

Start             Locked

8 – 9

8.

152401           4            150201     16

9.

152418              4

10 – 14 Installation Instructions

10.

150202     4      154047           2

11.

150202      2    154068      2

TH Modification required at this stage, see True Handleless guide for

further details.

12.

150308             2        150309    2

13.

150202   4 (Only if Drawer is being fitted)

14.

152402             2  150101      4

15 – 16 Without Drawer

15.

154014        2      150201       2

Note: Do not over tighten screws or use a power screwdriver.

16.

151999      2

17 – 18 Without Drawer

154015      2 150201      4

Note: For ease of fitting, Step 17 can be completed at same time as

Step 3

19 – 20 With Drawer

20.

151999      2

Ref. 170805 (05)

Documents / Resources

| bsi Built Under Oven Unit [pdf] Instruction Manual
Built Under Oven Unit, 600, 170805 05
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>