Olympus Power Battery Grip Instructions
- June 7, 2024
- Olympus
Table of Contents
HLD-9
INSTRUCTIONS
Thank you for purchasing this Olympus product. To ensure your safety, please read this instruction manual before use, and keep it handy for future reference. This product is for use with Olympus cameras only. For information on compatibility and safe battery use, see your camera manual.
Connecting the HLD-9 (Fig. 1, 2)
Inserting the Battery (Fig. 3)
Names of Parts (Fig. 4)
- Front dial
- Shutter button
- Rear dial
- B-Fn2 button
- B-Fn1 button
- Vertical shooting lock
- Q button
- Arrow pad
- Attachment wheel
- AC connector cover*
- To use the AC adapter, open the AC connector cover and plug in the AC connector.
Specifications
Power
Source
| Battery| : BLH-1 Li-ion battery ×1
---|---|---
AC power source| AC-5 AC adapter
Dimensions (W×H×D)| Approx. 132.7 × 55.8 × 66.0 mm (5.2 × 2.2 × 2.6 in.)
Weight (excluding battery and terminal cover)| Approx. 255 g (9.0 oz.)
Temperature/Humidity (operation)| –10 °C – 40 °C (14 °F – 104 °F)/30% – 90%
Splash resistance (when attached to camera)| Type Equivalent to IEC Standard
publication 60529
IPX1 (under OLYMPUS test conditions)
Safety Precautions
- Be sure to put the PBH cover (a) on the camera when the HLD-9 is not attached.
- Make sure that the camera is turned off before attaching or detaching the product.
- Use the specifi ed power sources only. Failure to observe this precaution could result in injury, explosion, or product malfunction.
- Do not operate the attachment wheel with your fi ngernails. Failure to observe this precaution could result in injury.
- Use within the operating temperature specifi ed for your camera.
- Do not use or store this product in areas exposed to high levels of dust or humidity.
- Thoroughly wipe any moisture off the product before opening/closing the AC connector cover or replacing the battery.
- Do not touch the contacts.
- Remove dirt from the contacts and other areas with a soft, dry cloth. Do not use damp cloths or thinner, benzene, or other volatile cleaners.
- There is a risk of explosion if the battery is replaced with the incorrect battery type.
- Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.
For customers in North America, Central America, South America, and the
Caribbean FCC Notice
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any unauthorized changes or modifi cations to this equipment would void the
user’s authority to operate.
CAN ICES-3(B)/NMB-3(B)
- Technical Support (U.S.A. / Canada)
24/7 online automated help: http://www.olympusamerica.com/support
Phone customer support:
Tel.1-800-260-1625 (Toll-free)
Our phone customer support is available from 9 am to 9 pm (Monday to Friday)
ET
E-Mail: distec@olympus.com
For customers in Europe
The “CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection. CE-mark
products are for sale in Europe.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate
collection of waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the
disposal of this product.
- European Technical Customer Support
Please visit our homepage http://www.olympus-europa.com
or call: Tel. 00800 – 67 10 83 00 (Toll-free)
+49 40 – 237 73 899 (Charged)
© 2016 OLYMPUS CORPORATION
WD178901
Printed in Vietnam
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>