tp-link Kasa Filament Smart Bulb User Guide
- June 7, 2024
- tp-link
Table of Contents
User Guide
Kasa Filament Smart Bulb
KL50B / KL60B
About This Guide
This guide provides a brief introduction to Smart Bulb and the Kasa Smart app,
as well as regulatory information.
Please note that features of Smart Bulb may vary slightly by model and
software version. All images, parameters and descriptions in this guide are
only examples and may not reflect your actual Kasa experience.
Conventions
In this guide, the following convention is used:
Convention
|
Description
---|---
Teal| Key information appears in teal, including management page text such as
menus, items, buttons and so on.
Underline| Hyperlinks are in teal and underlined. You can click to redirect to
a website.
Support
• Specifications can be found on the product page at https://www.tp-
link.com.
• Our Technical Support and troubleshooting information can be found at
https://www.tp-link.com/support/.
Introduction
The Smart Bulb is part of the Kasa smart home family of products, including
plugs, switches, cameras and more. You can adjust brightness, track energy
consumption, set schedules and timers, and set an alarm that wakes you
naturally by simulating the sunrise. Group lights together to control your
smart bulbs more easily and create your own scenes.
You can also control multiple smart home devices with the Kasa Smart app or
use your voice for added convenience. With Kasa, your home is never more than
a few taps away.
• No Hub Required – The Smart Bulb screws in just like an ordinary bulb.
Simply download the Kasa Smart app, connect to Wi-Fi and enjoy. No special
hardware is needed.
• Scheduling – Set your smart bulb to turn on or off while you are home or
away.
• Energy Saving – Reduce power usage without compromising on light quality.
• Voice Control – Pair the smart bulb with Amazon Echo, Dot and Tap or Google
Assistant for voice control.
• Remote Control – Set up the smart bulb easily and control from anywhere with
the free Kasa Smart app.
| KL50B (Dimmable, Soft White) | KL60B (Dimmable, Warm Amber) |
|---|---|
| A dimming range from 1%-100%, lighting for any occasion | A dimming range from |
1%-100%, lighting for any occasion
Set Up Your Smart Bulb
Follow the steps below to set up your smart bulb via the Kasa Smart app.
Step 1. Download Kasa
Get the Kasa Smart app from the App Store or
Google Play.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don’t have an account, create one first.
Step 3. Add Device
Tap the button in the Kasa Smart app and select Add a Device > Smart Lights >
Filament LED Bulb. Follow app instructions to complete the setup.
Main Device Controls
After you successfully set up your Smart Bulb, you will see the Devices page of the Kasa Smart app. Tap a smart bulb to see the Smart Bulb page.
Devices Page
This page lists your smart bulbs, and other smart home devices if any. You can
instantly turn on/off the bulb.
Smart Bulb Page
On the Devices page, tap a Smart Bulb, then you can have more detailed
configuration options about your bulb.
Configure Your Smart Bulb
On the Smart Bulb page, you can adjust the light temperature, set schedules, track energy consumption and change settings.
Presets and Recents
Tap to add presets and apply what you have set recently to your smart bulb.
Create Event
Tap to set schedules for your smart bulb to simplify your daily routine by
creating automatic On/Off action.
Usage
Tap to view and track energy consumption.
Device Settings
Tap to view and change the settings of your smart bulb. Moreover, you can
enable remote control for ease of use.
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.
Discover Kasa
Use the Kasa Smart app to pair your Smart Bulb with Amazon Alexa or Google Home Assistant and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day. Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant/ Samsung SmartThings for detailed instructions.
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark
of TP-Link Technologies Co., Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-
Link Technologies Co., Ltd. All rights reserved.
FCC Compliance Information Statement
Product Name: Kasa Filament Smart Bulb
Model Number: KL50B / KL60B
| Component Name | Model | FCC ID |
|---|---|---|
| Kasa Light Wi-Fi Module | KLM100 | TE7KLM100 |
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above
has been shown to comply with the applicable technical standards, FCC part
15. There is no unauthorized change is made in the equipment and the equipment
is properly maintained and operated.
Issue Date: 2019-09-01
FCC Compliance Information Statement
Product Name: Kasa Light Wi-Fi Module
Model Number: KLM100
Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above
has been shown to comply with the applicable technical standards, FCC part
15. There is no unauthorized change is made in the equipment and the equipment
is properly maintained and operated.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412 MHz -2472 MHz (20dBm)
No restrictions exist in the use of radio frequencies or frequency bands in
all EU member states and EFTA countries.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives
2014/53/EU,2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/ce.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the
limitation of exposure of the general public to electromagnetic fields by way
of health protection. The device complies with RF specifications when the
device used at 20 cm from your body.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licenceexempt
RSS(s). Operation is subject to the following two conditions:
1 ) This device may not cause interference.
2 ) This device must accept any interference, including interference that may
cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• Only use the control provided with or specified by these instructions to
control this device.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
WARNING :
• RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the
bulb and WAIT for the bulb to cool down before attempting to change it.
• Do not install the Smart Bulb with wet hands or when standing on wet or damp
surfaces.
• Compatible with regular light switches. Not suitable for use with standard
in-wall dimmers. Not compatible with photosensors, motion sensors, or
timers. Dimmable via the app only.
• NOT for use in totally enclosed or recessed luminaires. Suitable for damp
locations.
• NOT FOR EMERGENCY LIGHTING.
• The increased weight may reduce the mechanical stability of certain
luminaires and lampholders and may impair contact making and lamp retention.
• Operating Temperature: -15℃~40℃(5℉~104℉)
• Storage Temperature: -20 ℃ ~70℃(-4℉-158℉)
• Operating Humidity: 10%~90%RH, Non-condensing
• Storage Humidity: 10%~90%RH, Non-condensing
Explanation of the symbols on the product label
Symbol
|
Explanation
---|---
| Indoor use only
| RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
References
- Link: Simple, secure one-click payments
- WiFi Networking Equipment for Home & Business | TP-Link
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>