STIRLING Premium Tower Fan Instruction Manual
- June 7, 2024
- STIRLING
Table of Contents
STIRLING Premium Tower Fan Instruction Manual
Model Number EE-5612
Welcome
Congratulations on choosing to buy a Stirling® product. All products brought
to you by Stirling® are manufactured to the highest standards of performance
and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you
will enjoy using your purchase for many years to come.
Important Safety Instructions
This product is intended for indoor, domestic use only and is not intended
for commercial, industrial or trade use.
WARNING: When using an electrical appliance, basic safety precautions
should always be observed, including the following.
WARNING: READ AND SAVE THESE INSTRUCTIONS. Before using for the first
time, please read the instructions carefully and keep them for further
reference.
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR REPAIR
THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL
INJURY AND/OR PROPERTY DAMAGE.
-
Read all instructions carefully before using the fan.
-
Use this fan only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electrical shock, or injury to the person.
-
Remove the package and ensure that the fan is undamaged. In case of doubt do not use the fan and contact supplier.
-
Do not let children play with parts included in this package.
-
Before using the fan, check if the voltage marked on the rating label corresponds to the mains in your home.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with appliance.
-
Avoid using extension cord as the extension cord may overheat and cause a risk of fire.
-
Do not pull the power cord to disconnect the power source. Always grasp the plug to pull out.
-
Do not insert any objects into the fan as it may cause an electric shock, injure or damage the fan. Do not block or tamper with the fan in any manner while it is in operation.
-
Do not leave the fan unattended. Always unplug the fan when not in use.
-
This fan is not intended for use in wet or damp locations. Never position a fan where it may fall into a bathtub or other water.
-
Do not use the fan outdoors.
-
Disconnect the fan from the power source when not in use, and before servicing or performing any maintenance.
WARNING : The Main Power Switch and the On/Off switch should not be used as the sole means of disconnecting power. Always unplug the power cord before servicing or moving the unit.
WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device. -
Always disconnect the fan from the power supply when moving it from one location to another.
-
Keep the fan clean and maintained in good condition.
-
Use recommended parts only (non genuine parts may be dangerous, and will invalidate your warranty). Contact our After Sales Support centre (service@wkfe.com.hk).
-
When not in use store in a safe, dry, childproof location.
-
If the supply cord is damaged, it must be replaced by our After Sales
Support centre (service@wkfe.com.hk) in order to avoid a hazard. -
This appliance can be used by Children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
WARNING : To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the supply cord is damaged, it must be replaced by our After Sales Supper centre (service@wkfe.com.hk) in order to avoid a hazard.
General Safety Instructions
SAFETY WARNING
Although your fan is easy to operate, for your safety, the below warnings must
be followed:
- Do not place the appliance near a heat source.
- Use the appliance on a stable surface.
- Do not unplug by pulling on the power cord.
A. Before any cleaning or maintenance.
B. If it appears to be faulty.
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Product Overview
- LED display
- Fan grill
- Tower
- Base
- Remote control
– includes cell battery (CR 2025)
Not shown:
- Instruction manual
- Warranty card
- Quick start guide
Assembly
The base of the tower fan comes in two parts, which fit around the tower. Both parts fit easily together. The back half is the one with cut-outs for the power supply cord.
- First attach the front half of the base, aligning the holes in the base with the screw holes at the base of the tower fan, and leading the power cord through the centre hole.
- Then snap the back half of the base to the front half and secure with the four screws supplied (Fig. 1).
- Thread the power supply cord through the two cut-outs at the bottom of the base.
Fig 1
REMOTE CONTROL
The remote control comes with a button cell battery. Ensure battery is
correctly loaded in the remote before getting started. If the battery needs
replacing, a new CR2025 or equivalent battery needs to be inserted. Follow the
instructions below to replace:
- Push the lock tab to one side and pull out the battery compartment at the back side of the remote.
- Remove the old battery from the remote and insert a new one of the same type, observing the battery polarity (Fig. 2).
- Push the battery compartment back into the remote.
Fig. 2
WARNING: Keep batteries out of reach of children. Swallowing may lead to
serious injury or death in as little as 2 hours due to internal burns. If
swallowed, go straight to a hospital emergency room.
DANGER if swallowed Dispose of used batteries immediately. If you suspect your
child has swallowed or inserted a button battery immediately call the 24-hour
Poisons Information Centre on 13 11 26 and you will be directed to the nearest
hospital or emergency service that can manage the injury.7
Getting Started
The fan may be operated by the manual controls located on the top of the fan (Fig. 4) or by using the remote control (shown in Fig. 3).
Fig. 3 Fig. 4
Fig. 5
- Place the fan on a stable flat surface. Plug the cord set into a 220V-240V~A.C. electrical outlet.
- POWER: Turn the fan on by pressing the
POWER’ button; Turn the fan off by pressing the
POWER’ button again. - SPEED: You can adjust the fan speed to the desired level; low, medium, or high by pressing `SPEED’. The speed setting is displayed on the LED screen (Fig. 5).
- MODE: Pressing the `MODE’ button will set the fan into NORMAL, NATURAL, and SLEEP mode.
- TIMER: When the fan is in use, you can set the Timer to switch the fan to standby after the specified time. Press the `TIMER’ button repeatedly to increase the Timer setting from 1 hour to 12 hours as indicated on the LED Display. After 5 seconds, the Timer will start. Once the Timer runs out, the fan will switch off, and the detected Room Temperature will be shown on the LED Display. When the Timer is set, the LED display shows the time after which the fan will switch off.
- OSC: Pressing the `OSC’ button will start and stop the oscillation function. The symbol is displayed on the LED screen.
- TEMP: Once the unit is plugged into the power socket and switched on, the FAN will show the room temperature, and the
TEMP’ will change to
TIMER’ when the timer is set. - Power save mode: when the
SLEEP’ mode or the
TIMER’ is on, the main display will turn off after 30 seconds. Press any key to turn on the display again.
Maintenance
- Contact our After Sales Support centre (service@wkfe.com.hk) to undertake electrical repairs.
- If the unit requires external cleaning make sure it is switched off and unplugged from the power supply. Use a soft tissue or cloth for general cleaning. To remove more persistent dirt or grime wipe down with a cloth that has been dampened with warm soapy water. Do not use any solvents (such as thinners ) as these may damage the plastic casing.
Notice:
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with appliance.
- If the power cord is damaged, it must be replaced by our After Sales Support centre (service@wkfe.com.hk) in order to avoid a hazard.
CAUTION:
Always be sure that the appliance is switched OFF before cleaning the
appliance or attempting to store the item . ALWAYS plug and unplug unit with
dry hands.
Please Note: Take care not to stain the plastic parts with oil. Avoid using in places where oil is likely to spill on the fan. Damage deterioration is always caused by oil sticking.
STORING
Store the appliance in a dry location. Do not place any heavy items on top of
appliance during storage as this may result in possible damage to the
appliance.
Disposal
Disposal
Packaging
Your device has been packaged to protect it against transportation damage. In
the event it is to be disposed of, please recycle all packaging material where
possible and disposal of it safely.
Device
At the end of its working life, do not throw this product out with your
household rubbish. Electrical and electronic products contain substances that
can have a detrimental effect on the environment and human health if disposed
of inappropriately. Observe any local regulations regarding the disposal of
electrical consumer goods and dispose of it appropriately for the recycling.
Contact your local authorities for advice on recycling facilities in your
area.
Batteries
Do not dispose of used batteries in household rubbish. Batteries should be
taken to a collection point for used batteries.
TECHNICAL SPECIFICATIONS
Model Number: EE-5612
Rating Voltage: 220-240VAC
Rated Wattage: 45W
Troubleshooting
Q. The tower fan does not turn on
A. • Check whether the power outlet switch has been turned on.
• Check whether the plug is connected to the power outlet.
Q. The remote control doesn’t work
A. • Check the battery state of the remote control and, if required,
replace batteries with new ones.
• Check that the remote control is being used within six metres of the unit.
Q. Air flow is restricted
A. • Check whether the fan blades are dirty.
• Check whether the vents are clogged. You can remove any dirt and unclog
vents with a dry cloth.
Q. The buttons on the control panel or the remote control don’t work
A. • Check whether the buttons are stuck.
• Clean the buttons with a damp cloth.
Q. The tower fan does not oscillate.
A. • Check that there are no obstructions to the unit. If you have any
further issues, contact After Sales Support.
If the problem still extists after the above has been checked, please contact After Sales Support.
Premium Tower Fan
Repair and Refurbished Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need
to be returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated
data (such as files stored on a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for
repair.
You should also be aware that rather than repairing goods, we may replace
them with refurbished goods of the same type or use refurbished parts in the
repair process.
Please be assured though, refurbished parts orreplacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1800 898 750 or write to us
at:
Install + Fix Solutions
Unit 1, 9 Kingsbury Street, Brendale, QLD Australia 4500
1800 898 750
8:30am – 6pm AEST
service@wkfe.com.hk