Renpho True HEPA Air Purifier User Manual

True HEPA Air Purifier
Model No : RP-AP001

User Manual

Thank you for choosing RENPHO! This Air Purifier brings fresh air to you whether at home or at work. Choose from low, medium, or high fan speed. The 4-in-1 air purifier with four stages of filtration (washable pre-filter, charcoal filter, activated carbon filter, and HEPA filter with anti-bacterial peptide) tackle 99.97% of particles and odors. Plus the soft night light helps lull you to sleep. Enjoy a cleaner breathing space.

What’s Included

Your RENPHO Air Purifier box includes
1 x RENPHO Air Purifier
1 x User Manual

Guarantee

JOICOM CORPORATION
163-165 E. Freedom Ave., Anaheim,CA 92801

The air purifier has been checked for quality prior to leaving the manufacturing line and comes with a 1-year guarantee against any defects in either workmanship or materials.

Contact us directly via e-mail at: support@renpho.com or phone: +1(844)417-0149

Specifications

Safety Information

IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and wamings provided herein may result in inaccurate results and/or damage to the product itself.
Danger

• Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.
• Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoid electric shock and/or a fire hazard.

Warning

• Check if the voltage indicated on the bottom of the appliance corresponds to the local mains voltage before you connect the appliance.
• If the mains cord is damaged, you must have it replaced by distributor or a service center authorized by the distributor or similarly qualified persons in order to avoid a hazard.
• Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance
• Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

Caution

• This appliance is not a substitute for proper ventilation, regular vacuum cleaning or use of an extractor hood or fan while cooking.
• If the wall socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure you plug the appliance into a properly connected wall socket.
• Always place and use the appliance on a dry, stable, level and horizontal surface.
• Leave at least 40cm free space behind and on both sides of the appliance and leave at least 40cm free space above the appliance.
• Do not place anything on top of the appliance and do not sit on the appliance.
• Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.
• Make sure all filters are properly installed before you switch on the appliance.
• Only use the original filters specially intended for this appliance. Do not use any other filters.
• Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.
• Always lift or move the appliance by the handle at the back of the appliance.
• Do not insert your fingers or objects into the air outlet.
• Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense or chemical fumes.
• Do not use the appliance near gas appliances, heating devices or fireplaces.
• Always unplug the appliance after use and before you clean it.
• Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.
• The appliance is only intended for household use under normal operating conditions.
• Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet or kitchen.
• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.
• To prevent radio interference, the appliance should be kept at least 2 meters away from any device that uses radio waves.

Product Structure

Thank you for purchasing the RENPHO Air Purifier Before using, please read this manual carefully.

1. AQ indicator
2. Motor
3. Control panel
4. AQ indicator
5. Filter 4: NEPA filter
6. Filter 3:Activated carbon filter
7. Filter 2:Charcoal filter
8. Filter 1:Pre-filter
9. Front cover
10. ack housing
11. Dust sensor
12. Base

Placing the filters

The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance Remove all filters, unpack them and place them back into the appliance as described below.
Tip: Place the appliance against a wall for more stability when you remove or insert filters. Note: Make sure you insert the filters in the correct position.

Note: Make sure you insert the filters in the correct position.

1. Place your fingers in the recesses of the side cover and gently pull the top part of the front cover towards you. Then lift the hooks at the bottom of the cover out of the bottom of the appliance.
   

2. Remove all the filters from the appliance.
   

3. Remove all packaging material from the filters.
   

4. Put filter 4 (HEPA filter), filter 3 (Activated carbon filter), filter 2 (Charcoal filter), filter 1(Pre-filter) back into the appliance. For more detail, see section “Filter replacement”.
   Note: Make sure that the side with the tag is pointing towards you (filter 4, 3, 2)
   

5. To reattach the front cover, insert the bottom hooks into the bottom of the appliance first. Then push the front cover against the body of the appliance.
   

Using The Appliance

1. Put the plugin the wall socket
   All lights will turn on once and you hear a beep. Then the lights go out again.

2. Press the on/off button to switch on the appliance.
   The power light and FAN SPEED 1 (lowest) light will turn on.

3. AQ(Air Quality)
   Built-in air quality sensor can detect air quality, after switching on the appliance, it will show the quality of the air automatically through the different colors.AQ indicator color| Air quality level
   ---|---
   Blue| Good
   Yellow| Fair
   Red| Bad

4. Filter replacement lights
   Filter replacement lights
   The 4 filters:
   1. Washable Pre-filter
   2. Charcoal filter
   3. Activated carbon filter
   4. NEPA filter with anti-bacterial peptide When the light on the filters indicator flashes, it means that corresponding filters need to be cleaned or replaced.

5. Fan speed adjustment and Auto Mode
   The fan speed light indicates at which fan speed the appliance is operating. Press Speed button to adjust 1-3(refers to low, medium, high) fan speed level. Press the Speed button again to enter Auto mode and the fan speed will be automatically adjusted according to AQI level as shown below:
   Tips: When the appliance is switched on, the fan speed is at a low level.

AQI indicatro Color

| Blue| Yellow| Red
---|---|---|---
Fan Speed| Speed 1| Speed2|

Speed3

To exit Auto mode, just press the Speed button. The appliance will return to manual control at fan speed land the Auto mode light turns off.
Friendly reminder: Auto mode is more convenient, effective, and energy- efficient.

6. Setting timer
   When the appliance is switched on, press button to start the timer function. You can set auto-shutoff to 2h, 4h or Sh by pressing the button , after this time, your appliance will switch off automatically. To cancel the Timer function, just press button repeatedly until the light turns off.

7. Sleep mode
   Using the appliance in Sleep mode makes it operates quietly. Press n button to activate the sleep mode, press n button again to switch off.
   Note: If you want to go back to the Fan Speed mode or Auto mode, simply press the Speed or Auto button.

8. Keylock mode

1. Press button for 3 seconds to activate Keylock mode to lock all buttons; useful if your house has a young child.
2. To cancel keylock mode, just press and hold button for 3 seconds.

Cleaning

• Always unplug the appliance before you dean it.
• Never immerse the appliance in water or any other liquid.
• Never use aggressive or flammable cleaning agents such as bleach or alcohol to dean any part of the appliance.
• Only the pre-filter is washable. All other filters are NOT washable.

1. Body of the appliance
   Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside.

1. Wipe away dust with a soft dry cloth from the body of the appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.

2. Air quality sensor
   Clean the air quality sensor every 2 months for optimal functioning of the appliance. Clean it more frequently if you use the appliance in a dusty environment.
   Note: When the humidity level in the room is very high, it is possible that condensation develops on the air quality sensor. As a result, the Air Quality light on the control panel and the air quality indicator may show that the air quality is bad even though the air quality is good. In this case you have to clean the air quality sensor or use one of the manual speed settings.

1. Clean the air quality sensor inlet and outlet with a soft brush.
   2) Remove the air quality sensor cover.
   3) Clean the air quality sensor, the dust inlet and the dust outlet with a lightly moistended cotton swab.
   4) Dry them with a dry cotton swab.
2. Reattach the air quality sensor cover.
   

3. Pre-filter
   Note: Filter light flashes: Filter 1(pre-filter) needs to be cleaned. We suggest cleaning the pre-filter once a month. Normally, light 1 flashes after running a month.

1. Switch off the appliance and unplug. (a)
   2) Place your fingers in the recesses of the side cover and gently pull the top part of the front cover towards you. Then lift the hooks at the bottom of the cover out of the bottom of the appliance. (b)
   3) To remove the pre-filter, grab the two projections at the top and pull the filter towards you. (c)
   4)Wash the pre-filter under a running tap. If the pre-filter is very dirty, use a soft brush to brush away the dust. (d)
   Tip: Alternatively, you can clean the pre-filter by removing the dust with a vacuum cleaner.
2. Air-dry the pre-filteraway the dust. (d)
   Note: Make sure that the pre-filter is completely dry. If itis still wet, bacteria may multiply in it and shorten the lifespan of the pre-filter.
3. Put the pre-filter back into the appliance. Attach all hooks properly to the appliance. (e)
   Note: Make sure that the side with the two projections is pointing towards you. You also can find word “Front”.
4. To reattach the front cover, insert the bottom hooks into the bottom of the appliance first. The push the front cover against the body of the appliance. (f)
   

Filter Replacement

When one of the filters is almost full and has to be cleaned or replaced, the appropriate filter replacement light starts to flash.
Filter light 2 flashes: Filter 2(Charcoal filter) needs to be replaced. We suggest replacing the charcoal filter every 6 months. Normally, light 2 flashes after running 6 months.
Filter light 3 flashes: Filter 3(activated carbon filter) needs to be replaced. We suggest replacing the activated carbon filter every 6 months. Normally, light 3 flashes after running 6 months.
Filter light 4 flashes: Filter 4(HEPA filter) needs to be replaced. We suggest replacing the HEPA filter every 6 months. Normally, light 4 flashes after running 6 months.
Note: The filters’ lifetime is based to your house air quality and usage time (assuming 24h being on). The suggested replacement period is just for your reference. Using the appliance in a humid environment will reduce the lifetime of activated carbon filter and HEPA filter.

1. How to replacing the Charcoal filter, Activated carbon filter and HEPA filter?
   Tip: Place the appliance against a wall for more stability when you remove or insert filters.

1. Switch off the appliance and unplug it. (a)
   2) Place your fingers in the recesses of the side cover and gently pull the top part of the front cover towards you. Then lift the hooks at the bottom of the cover out of the bottom of the appliance. (b)
   3) To remove filter 1 (pre-filter), grab the two projections at the top and pull the filter towards you. (c)
   4) To remove the filter 2 (charcoal filter) which is fixed by velcro with filter 3, just tear it off and replace the new charcoal filter.(d)
   5) To remove the filter 3 (activated carbon filter), grab its tag and pull it towards you, then replace the new activated carbon filter. (e)
   6) To remove the filter 4 (HEPA filter), grab its tag and pull it towards you, then replace the new HEPA filter. (f)
   Note: For more detail on the sequence to put filters back into the appliance, please refer to the drawing on page
   — “product structure”.
2. To reattach the front cover, insert the bottom hooks into the bottom of the appliance first, then push the front cover against the body of the appliance. (g)
3. Put the plug in the wall socket and switch on the appliance again. (h)

2. Reset Filter’s lifetime.
   After replacing the filters, when you switch on the appliance, the replace filter light will still flash. You need to reset the filter ‘s lifetime sensor, so that the appliance can calculate the filters’ lifetime.
   Press the button. The light will turn on but not flash, meaning you choose this filter No. to reset,press and hold button for 3 seconds, the light of the filter will tum off completing the reset.

3. Filter Replacement Force Mode
   If you use the appliance in an environment with more pollution, you can replace these filters even if the light does not flash. The filter replacing method is the same.
   To force reset the filter’s lifetime:

1. Power plugged and turn off the appliance, press and hold for 5 seconds and the filters light will flash.
   Note: Press button or simply not press anything for 60 seconds and the appliance will exit the Filter replacement force mode.
2. Press button repeatedly to choose the appropriate filter. The chosen filter light will stop flashing. Press and hold button for 3 seconds and the filter light turn off and complete the reset.
3. You can repeat step 2 to turn off other filters lights to complete all filters’ reset.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact us directly via e-mail at: support@renpho.com or phone. 1(844)417-0149

back cover and re-install it

Power plug is not connected to a power supply.| Unplug and then plug the power in again.

The machine does not tum on| Plug in the power and tum on the machine again.
Outlet airflow significantly reduced| Filters plastic packaging hasn’t been removed| Filter’s plastic packaging should be removed before use.
Air quality is good, and the Auto mode has been activated.| To exit the Auto mode by pressing the speed button, the appliance wil to manual control and the Auto mode light will tum off.
Night mode automatically starts and the LED indicator tus off. Meanwhile the fan speed and noise is also reduced.| Manually select your preferred fan
The Pre-filter is dirty.| Clean the Pre-filter.
The filters haven’t be replaced| Replace the filter(s).
Not enough clearance and space for ventilation| Make sure the rear and sides of the device has 40cm of clearance.
Fan speed can’t adjust automatically| Air quality sensor becomes damp or the indoor temperature is too high, which causes condensation to form on sensor surface.| Keep the air quality sensor clean and dry.
Poor performance or not enough purifica- tion capacity| The room coverage exceeds applicable area.| Use the air purifier in a room with applicable area.
| Air inlet or outlet of the machine is blocked.| Remove blocking object.
Too nois| Filters plastic packaging hasn’t been removed| Filter’s plastic packaging should be removed before use.
Air quality indicator color unchanged| The air quality sensor is dirty.| Clean the air quality senor.
Indoor air ventilation is poor.| Open the window and improve air ventilation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>