ELEGIANT wireless microphone User Manual
- June 7, 2024
- Elegiant
Table of Contents
ELEGIANT wireless microphone User Manual
Product Introduction
- Power key
- SET key short press to change working channel, 10 channels optional
- Battery status
- Wireless signal intensity
- Working channel CH01-CH10)
- Low-battery indicator (orange)
- Microphone receiver LED indicator(blue)
- Bluetooth status indicator (blue)
- Charging indicator(red)
- PWR: PWR: power switch
- PAIR: PAIR: Bluetooth pair button
- DC5V: charging port
Technical Parameters
- Working frequency band: UHF
- Variable channels: 10
- Distortion factor: 0.5%
- Operating range >10m
- Vibration pickup: moving coil Type microphone core
- Power supply: built-in rechargeable lithium battery
Packaging List
- Microphone x 1
- Receiver x 1
- USB charging line x 1
- D3.5 to D6.5 connector x 1
- D3.5 Connecting line x 1
- Anti-skid ring x 1
Instructions
-
Microphone usage
Turn on the tailpipe, install two No.5 batteries, short press the power button to turn on (long press to shut down); -
Receiver usage
Bluetooth connection: Press PAIR button and bluetooth indicator flashes to ensure the receiver bluetooth is in “pairing” mode; Click settings-bluetooth- search in mobile phone to find and click K380R for connection; Play the music on mobile phone, thus background music is uploaded to stereo. -
Charging, low power indication
Charging: Receiver’s red LED indicator is on when charging, and red light goes off when fully charged; Low-power: Low battery indicator of speaker microphone shows when the power is low; Receiver’s orange LED indicator flashes, with warning tone.
Product Connection Diagram
Simple Fault Treatment
- Speaker microphone or receiver fails be turned on: Please replace the battery when it indicates low battery power; If the receiver is not powered, use USB cable to charge.
- Sound of microphone: When microphone is too close to the stereo or sound volume is too high, reduce the sound volume or keep away from the stereo.