tp-link Kasa Smart Wi-Fi Plug 2-Outlets User Guide

: June 7, 2024
: tp-link

tp-link Kasa Smart Wi-Fi Plug 2-Outlets

About This Guide

This guide provides a brief introduction to Smart Plug and the Kasa app, as well as regulatory information. Please note that features of Smart Plug may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.

Conventions
In this guide, the following convention is used:

Convention	Description
Teal	Key information appears in teal, including management page text such as

menus, items, buttons and so on.
Underline| Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info

Specifications can be found on the product page at https://www.tp-link.com.
Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.

Introduction

With 2-outlets in one smart plug, you can control up to two devices individually while using only one in-wall outlet. Ideal for controlling two lamps in your bedroom or living room. Download the Kasa app and control your outlets remotely. The Kasa app provides easy step-by-step installation instructions and convenient remote control from anywhere.

Two Smart Plugs in One – Independent control of 2 plug-in devices while only using a single in-wall outlet.
Control from Anywhere – Use the Kasa app on your iOS or Android device to control your smart plug remotely.
Scheduling – Use Schedules to set your smart plug to automatically turn on and off.
No Hub Required – Connect to your existing Wi-Fi router.
Voice Control – Use Alexa, Google Assistant to control your devices with voice commands.

Supported Load Types

Coffee Maker: 1500 W	Heater: 1500 W	Toaster: 1500 W
Desk Lamp: 86.4 W	Humidifier: 600 W	Fan: 74.5 W
LCD: 74.5 W	Iron: 1500 W

Appearance

Smart Plug has 2 individual smart outlets, with control buttons to turn on or off plug-in devices and LEDs to show you the current status. TP-Link logo changes color according to different status. See the explanation below:

Set Up Your Smart Plug

Follow the steps below to set up your Smart Plug via Kasa Smart app.

Download and install Kasa app
Go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet.
Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If you don’t have a TP-Link ID, tap Create Account and the Kasa app will guide you through the rest.
Add Device

Tap the + button in the Kasa app, select Smart Plug, 2-Outlet and then follow step-by-step app instructions to complete the setup.

Main Device Controls

After you successfully set up your Smart Plug, you will see the home page of the Kasa app. Here you can view the status of all devices that you’ve added to Kasa and manage them. There are 2 smart outlets of HS107 and you can tap on a smart outlet to control and manage.

Home Page

Device Status

Configure Your Smart Plug

On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Usage and change the settings of your smart outlets

Set Schedule

Tap to set a schedule for your smart outlet to simplify your daily routine by creating automatic On/Off action

Preset Away Mode

Tap to preset the Away Mode and your smart outlet will be randomly turned on/off during this time.

Set Timer

Tap to set the timer and your smart outlet will automatically turn on/off after the time ends.

Check Usage

Tap to view and track energy consumption

Device Settings

Tap to view and change the settings of your smart outlet.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.

Discover Kasa

Use the Kasa app to pair your Smart Plug with Amazon Alexa, Google Home Assistant and enjoy a full hands-free experience. Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and Away / Amazon Alexa / Google Assistant for detailed instructions.

Authentication

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP- Link Technologies Co., Ltd. All rights reserved

FCC Compliance Information Statement
Product Name: Kasa Smart Wi-Fi Plug, 2-Outlets
Model Number: HS107
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation , has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthoriz ed change is made in the equipment and the equipment is pr operly maintained and operated. Issue Date: 2018.7.30

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Operating Temperature: 0℃~40℃ (32℉-104℉)
Storage Temperature: -40℃~60℃ (-40℉-140℉)
Operating Humidity: 10%~90%RH, Non-condensing
Storage Humidity: 5%~90%RH, Non-condensing
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Symbol	Explanation

Indoor use only

|

AC voltage

| RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.