tukzer TZ-ML-02 Monitor Screen Light Bar with Smart Touch Sensor User Manual

SOURCE SCREEN
HANGING LAMP

User Manual
TZ-ML-02
Please read this manual carefully before using the product and keep it properly.

Product Introduction

The screen bar of hanging light adapts long design with wide luminous effect, three color temperature can be switched, the brightness is adjustable. There is no video flash, it will provide clear and comfortable lighting ,it can be timed.

Product Features

1. Contracted The Lamp Body
2. Does Not Occupy A Space
3. A Second Fixed
4. No Stroboflash
5. Stepless Dimming
6. Three Color Temperature Adjustment
7. USB Power Supply

Product Parameters

Product Model No. : TZ-ML-O2
Product Material ; ABS
Product Color : Black/ White
Rated Voltage : SV=
Product Power : 5W (78X0.2W/LED Module )
Rated Current: 1A =
Light Source : LED
Color Rendering Index (Ra) : >80
Working Temperature : -5~+45
Color Temperature : 3000K-4000K-6000K(Three colors temperature adjustment)
Luminous Flux : >90LM
Product Weight : #413¢
Product Size : 500°65104MM
Packing Size : 53595*120 MM

Product Parts List

LED Desk Lamp “1
User Manual *

Product Part Name

Product Instructions

1. Connect the USB cable to your computer/ adapter and connect the product to the other end

2. Press switch button for 1 second to turn on the bright white light, press second
   time to switch to yellow light, press third time to switch to warm light ,press fourth time to turn off the light, by doing long press this button under any light color mode to adjust the brightness. When the light is on, press and
   the light will be off automatically after 60 minutes, reminding you to sleeping time. Press fast mode button to set the highest brightness level of the light.

3.  When the computer display screen is thinner or difficult to fix, you can use the own sucker to reinforce. The operation method is as the following sketch.

Notes

Warning:

1. The product is not waterproof, Please do not use it in a wet environment.
2. Please do not disassemble the product by yourself.
3. To avoid danger, do not cover the product.
4. Keep children away from the lamp, this product is not meant for children Cut off the power supply quickly in case of abnormal phenomenon ,and contact with the seller.

Note:

1. The light source of the secondary lamp is not replaceable. When the light source reaches the end of its life, the whole lamp should be replaced.
2. SELV LED with CCC certification is powered by AC electronic control device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>